Instruction/ maintenance manual of the product KL13TT2 Kelvinator
Go to page of 10
.
.
2 Don't put it at damp place, like bathroom. Never clean it with water. Don't put the wet clothes on the control The water over 50 is forbidden. Don't put your hand into the spin or wash tub while it is working even though it runs very slowly , especially take care of the children.
3 INST ALLA TION & ADJUSTMENT BEFORE USING BEFORE USING The use of drain hose The ex factory installation position of the drain hose is shown in Figure 1. The hose protrudes out from washing side. Lay down the machine on the soft object with its face towards the ground.
4 MAIN FUNCTIONS BEFORE USING BEFORE USING The comprehensive performance of the machine is excellent and its appearance is nice . As to the noise-proof design, the machine uses the enclosed base and low-noise motor which can lower the noise greatly . We assure you will have a quiet world when use it.
5 WASHING A TTENTIONS USING PROCESS USING PROCESS Reference weight How to use the bleacher Fill the water to the specified level, and pour the bleacher into wash tub. The colourful clothes are apt to fade, so the bleacher is forbidden to use. The bleacher should not contact with clothes directly .
6 WASHING SEQUENCE USING PROCESS USING PROCESS 1.Put the clothes into the spin tub smoothly . 2.Spin. (1)Press the safety cover properly. Even though a few clothes, press the cover too. (2)Close the spin cover . (3)Spin for 1- 2 minutes. 3.Rinse and foam-removing spinning (1)Open the spin cover .
7 WASHING SEQUENCE USING PROCESS USING PROCESS Rinse(filling water) 1.Put clothes in the wash tub and select the suitable water flow according to the clothes. 2.Rinse Adjust the wash timer to 5-7minutes to do rinsing. Rinse with water (Repeat the midway spinning and rinse for 2-3 times.
8 AFTER USING After washing, clean the lint and foreign objects on the lint filter and the frame, or it will affect the next use. Before cleaning, pull the plug out. During washing,the lint-filter must be used. Be sure to clean it after use. 1.T ake the filter down.
9 Phenomena Reason TROUBLE-SHOOTING If there is something wrong with the machine, pull plug out before checking. Some phenomena may be not faults. Before repair, be sure again. If sure, contact with the repair station or after-sale service department.
An important point after buying a device Kelvinator KL13TT2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kelvinator KL13TT2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kelvinator KL13TT2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kelvinator KL13TT2 you will learn all the available features of the product, as well as information on its operation. The information that you get Kelvinator KL13TT2 will certainly help you make a decision on the purchase.
If you already are a holder of Kelvinator KL13TT2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kelvinator KL13TT2.
However, one of the most important roles played by the user manual is to help in solving problems with Kelvinator KL13TT2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kelvinator KL13TT2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
