Instruction/ maintenance manual of the product XTR-6000CU2 Anchor Audio
Go to page of 4
CONTENTS GETTING ST ARTED - WARRANTY INFORMA TION .................................................................................................. 2 SETTING UP YOUR XTREME SOUND SYSTEM ................................................................
7 2 A MESS AGE FROM THE OWNER Thank you for choosing an Anchor Audio portable sound system. Our products incorporate state- of-the-art design and the finest quality of materials and workmanship. We’re proud of our products and appreciate the confidence which you have shown by select- ing an Anchor system.
FEEDBACK Feedback, a howling noise or shrill sound, is self-generated by the sound system. It ’s caused by a microphone picking up the s ound coming from the speaker and then re-amplifying it. Once a feedback loop starts it continues until the system is adjusted.
BASIC SYSTEM OPER A TION NOTE: Fully Charge Batteries Before First Use! 1. Before turning your system on: Set all Input Level Controls to minimum & T ones Controls to the flat or middle setting 2. Plug in a wired microphone (MIC IN or BALANCED INPUT jacks) and/or a separate audio source (LINE-IN jack) 3.
An important point after buying a device Anchor Audio XTR-6000CU2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Anchor Audio XTR-6000CU2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Anchor Audio XTR-6000CU2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Anchor Audio XTR-6000CU2 you will learn all the available features of the product, as well as information on its operation. The information that you get Anchor Audio XTR-6000CU2 will certainly help you make a decision on the purchase.
If you already are a holder of Anchor Audio XTR-6000CU2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Anchor Audio XTR-6000CU2.
However, one of the most important roles played by the user manual is to help in solving problems with Anchor Audio XTR-6000CU2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Anchor Audio XTR-6000CU2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
