Instruction/ maintenance manual of the product HDS 2000 Karcher
Go to page of 16
HDS 2000 Super 5.956- 535 A 2009680 (11/04) www .kaercher .com.
Lesen Sie vor der Inbetriebnahme diese Betriebsanleitung und beachten Sie besonders die Sicherheitshinweise für Hochdruckreiniger. Please read these operating instructions before starting and strictly observe the Safety Instructions for High Pressure Cleaners.
.
HDS 2000 Super GB 17 1. Diagram of the appliance 18 Service/fault indicator window 1 9 Filler hole for liquid softener 2 0 Filler hole for detergents (x 2) 2 1 Warning light – SERVICE 22 Warning lig.
HDS 2000 Super 18 GB 2. Flow-path schematic 1 Water inlet 2 Water cooling, motor 1 3 Water cooling, motor 2 4 Water filter 5 Float tank 1 6 Liquid softener reservoir (DGT) 7 Solenoid valve, DGT 8 Floa.
HDS 2000 Super GB 19 3. Technical Data 1.071-111 1.071-261 1.071-281 Power connection Voltage 400 V 230 V 420 V Type of current 3~50 H z 3~50 H z 3~50 H z Connected load 12 k W 12 k W 12 k W Mains fuse (slow) 25 A 50 A 25 A Water connection Supply temperature (max.
HDS 2000 Super 20 GB 4. Start-up 4.1 Environmental protection • • • • • Please dispose of packaging environmentally responsibly. The packaging materials are recyclable. Please do not throw the packaging in with household rubbish but take it to a recycling centre.
HDS 2000 Super GB 21 4. Start-up 4.7 Connecting the water • • • • • See technical data, chap. 3 for connected loads. • • • • • Attach the supply hose to the appliance and to the water line. The supply hose is not included in standard delivery.
HDS 2000 Super 22 GB 5. Operation 5.1 Venting the appliance • • • • • Open the water intake. • • • • • Allow the appliance to run without the high- pressure hose until the water emerges without bubbles. • • • • • Then connect the high-pressure hose.
HDS 2000 Super GB 23 5. Operation 5.6 Operating with steam • • • • • When operating temperatures are above 98 °C, the operating pressure must not exceed 32 bar. Thus, the standard high-pressure nozzle must be replaced by a steam nozzle (available as an accessory).
HDS 2000 Super 24 GB 5. Operation • • • • • In order to protect the environment, we recommend that detergent is used sparingly. Comply with the metering recommendation on the detergent container label. • • • • • We offer an individual range of detergents and preservatives and therefore guarantee trouble-free operation.
HDS 2000 Super GB 25 6. Care and maintenance Always disconnect the appliance from the electric mains supply before carrying out any maintenance work. • • • • • You can arrange a regular safety inspection with your dealer or take out a maintenance contract.
HDS 2000 Super 26 GB 6. Care and maintenance 6.2 Visual Inspection • • • • • Checking the connector cable The connector cable must not be damaged (risk of electricution). A damaged connector cable must be replaced immediately by an authorized Customer Service/qualified elec- trician.
HDS 2000 Super GB 27 Display Corrective Action – Increase water supply volume – Clean strainer in water connection – Clean strainer before the low-water safety device – Replace the reed switch.
HDS 2000 Super 28 GB 7. Troubleshooting 7.2 Indicator lights • • • • • Indicator light for fuel tank lights up – Refill with fuel. – Check that the fuel level sensor is functioning correctly. • • • • • Indicator light for liquid softener lights up – Refill with RM 110 liquid softener.
HDS 2000 Super GB 29 8. General Information 8.1 Safety equipment Overflow valve with 2 p ressure switches When the water flow rate is reduced with the servo compression valve on the hand-held spray gun or with the flow regulator on the pump head, the overflow valve opens and some of the water flows back to the pump suction side.
An important point after buying a device Karcher HDS 2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Karcher HDS 2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Karcher HDS 2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Karcher HDS 2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Karcher HDS 2000 will certainly help you make a decision on the purchase.
If you already are a holder of Karcher HDS 2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Karcher HDS 2000.
However, one of the most important roles played by the user manual is to help in solving problems with Karcher HDS 2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Karcher HDS 2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
