Instruction/ maintenance manual of the product A 2011201 Karcher
Go to page of 25
BTA 5.960-505.0 ETL 5.970-054.0 (LP 400V) 5.970-055.0 (MP 400V) 5.970-156.0 (LP 230V) 5.970-157.0 (MP 230V) A 2011201 Betriebsanleitung WATERCLEAN 600 LP / MP.
WTC 600 LP / MP 2 Version 06/05 1 2 3 4 6 7 18 19 8 9 20 10 13 14 17 16 12 11 15 5.
WTC 600 LP / MP 3 Sicherheitshinweise Version 06/05 Inhaltsverzeichnis Anlagenelemente 1 Sandfilter 2 Aktivkohlefilter 3 Steuerung Aktivk ohlefilter 4 Steuerung Sandfi lter 5 Manometer Eingangsdruck S.
WTC 600 LP / MP 4 Bedienung un d Pflege Version 06/05 3 Bedienung und Pflege 3.1 Inbetriebnahme Vor der Inbetriebnahme : • Sicherstellen, dass die Anlage mit der Roh- wasserquelle bzw. deren Fördereinrichtu ng, z. B. Vordruckeinhei t, verbunden ist.
WTC 600 LP / MP 5 Bedienung u nd Pflege Version 06/05 3.1.3 Anlage einschalten • Prüfen, ob die Pumpen der Dosierstatione n, Sand- und Aktivko hlefilter an d en entsprechen- den Steckdosen (18 / 19) am Sch altkasten (8) angeschlossen si nd. • Prüfen ob der Betriebsartenschalt er (9) in der richtigen Position "Au tomatik" bzw.
WTC 600 LP / MP 6 Bedienung un d Pflege Version 06/05 3.2.2 Sand- und Aktivkohlefilter Die Steuerung von Sand- und Aktivko hlefilter zeigt während dem Betrie b die aktuelle Uh rzeit an. Zum Wechseln der Anzeige: • Taste (32) ca. 5 s drücken, Displ ay (31) zeigt die Uhrzeit d er Regenera tion an.
WTC 600 LP / MP 7 Bedienung u nd Pflege Version 06/05 3.2.4 Feinfilter wechseln Druckdifferenz am Man ometer (15) und (16 ) prü- fen. Bei mehr als 0,8 bar, Fi ltereinsatz wechseln: • Anlage am Hauptschalter (20) ausschal ten. • Rohwasserzufuhr sperren.
WTC 600 LP / MP 8 Bedienung un d Pflege Version 06/05 (2) Leitfähigkeit des T rinkwasser s v o n _____ auf _____ µS/cm gestiegen Am Display des Bedi enfeldes (10 ) den aktuel len Leitwert des Trinkwassers ablesen und mi t dem Wert bei Inbetriebna hme vergleichen (sieh e Inbe- triebnahmeprotokoll ) .
WTC 600 LP / MP 9 Verbrauchsmateri al Version 06/05 (2) Dosierung Die Dosierung wird in Abhängigkei t des Füllstan- des im Dosierbehälter durchgeführt. Vollständig entl eerter Dosierbehälter: • 10 l Trinkwasser in den Dosierbehälter fül len.
WTC 600 LP / MP 10 Störungen Version 06/05 5 Störungen Störungen an der RO-Anlage werden am Bedienfeld (10) mit LEDs signal isiert und am Display ang e- zeigt. Störungen an der Vordruckei nheit werden mit der rote n LED (26) auf der Steuereinheit de r Vordruck- einheit angezeigt .
WTC 600 LP / MP 11 Technische Daten Version 06/05 6 Technische Daten Parameter WTC 600 LP WTC 600 MP Umgebungstemperatur +1°C - +50°C Lagerungstemperatur (Au slieferung) bis -10°C Luftfeuchte ≤ 100% r. F. Versorgungsspannung 3 Ph 400 V 50 Hz * 1 Ph 230 V 50 Hz * * je nach Ausführung derAnlage Steuerungen Vorfil ter: prim/sek.
WTC 600 LP / MP 12 EG Konformitätserklärung Version 06/05 7 EG Konformitätserklärung Hiermit erklären wir, dass die nachfolgend bezei chnete Maschine aufgrund ihrer Konzipieru ng und Bau- art sow.
BTA 5.960-505 .0 ETL 5.970-054.0 (LP 400V) 5.970-055.0 (MP 400V) 5.970-156.0 (LP 230V) 5.970-157.0 (MP 230V) A 2011201 Operating Instructions WATERCLEAN 600 LP / MP.
WTC 600 LP / MP 2 Version 06/05 1 2 3 4 6 7 18 19 8 9 20 10 13 14 17 16 12 11 15 5.
WTC 600 LP / MP 3 Safety Notes Version 06/05 Contents Equipment Components 1 Sand filte r 2 Activated carbon filter 3 Control, activated carbon filter 4 Control, sand filt er 5 Manometer, sand filter .
WTC 600 LP / MP 4 Maintenance and Care Version 06/05 3 Maintenance and Care 3.1 Starting Operation Before starting operation : • Make sure that the equipment is conne cted to the untreated wa ter source and the respective transporting ge ar, e. g., admission-pressu re unit.
WTC 600 LP / MP 5 Maintenance and Care Version 06/05 3.1.3 Switching On th e Equipment • Check if the pumps of the metering stati on, sand and activat ed carbon filter are connected to the respective power out lets (18 / 19) at the switch b ox (8).
WTC 600 LP / MP 6 Maintenance and Care Version 06/05 3.2 During Operation 3.2.1 Control and Correct ive Action Intervals d…daily, w…weekly, m… mont hly 3.2.2 Sand and Activat ed Carb on Filter During operation, th e sand and activated carbon filter control indi cates the actual time.
WTC 600 LP / MP 7 Maintenance and Care Version 06/05 • After a while the indication moves ba ck to the current tim e. 3.2.3 Bleeding th e Metering Pump The meter ing pump m ust be bled wh en the pump has drawn in air (e. g., becaus e the metering con- tainer is comp letely e mpty).
WTC 600 LP / MP 8 Maintenance and Care Version 06/05 • Before screwing on the fil ter bowl, check the sealing ring (39) for da mage. • Screw on the filter bowl an d tighten with the fil- ter wrench. • Open the untreated water supply again and start the system with th e main swit ch.
WTC 600 LP / MP 9 Maintenance and Care Version 06/05 Notice: The amount of concentrate will in- crease. This is correct. Observe the maximum pressure of 21 bar (MP) or 14 bar (LP) at the manometer (11)! • Repeat the adjustment steps, if req uired. The original dr inking water amount may possibly not quite be reached.
WTC 600 LP / MP 10 Consumption Material s Version 06/05 (2) Metered Addition The metered addit ion is carried out dependent o f the level in the meterin g container. Complete ly emptied metering co ntainer: • Fill 10 l of drinking water into the metering con- tainer.
WTC 600 LP / MP 11 Malfunctions Version 06/05 5 Malfunctions Malfunctions o f the RO system are signal ed with LEDs at the contro l panel (10) and indicated at the display. Malfunctions on the admissio n-pressure unit are indic ated with the red L ED (26) on the contro l unit of the admission-pressu re unit.
WTC 600 LP / MP 12 Technical Data Version 06/05 6 Technical Data Parameter WTC 600 LP WTC 600 MP Ambient temperature +1 °C – +50 °C Storage temperature (upon delivery) t o –10 °C Humidity <100 % r.F. Supply voltage 3*400 V 50 Hz * 1*230 V 50 Hz * * depending on supply by the customer Pre-filter controls: pr im.
WTC 600 LP / MP 13 EU Declaration of Confo rmity Version 06/05 7 EU Declaration of Conformity We hereby declare that the equipment described below conforms to the rele vant fundamental safe ty and health requirements of the appro priate EU Directive, both in i ts basic design and construction as well as in the version marketed by us .
An important point after buying a device Karcher A 2011201 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Karcher A 2011201 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Karcher A 2011201 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Karcher A 2011201 you will learn all the available features of the product, as well as information on its operation. The information that you get Karcher A 2011201 will certainly help you make a decision on the purchase.
If you already are a holder of Karcher A 2011201, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Karcher A 2011201.
However, one of the most important roles played by the user manual is to help in solving problems with Karcher A 2011201. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Karcher A 2011201 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
