Instruction/ maintenance manual of the product JX-CD910 Jwin
Go to page of 8
PORT ABLE COMP ACT DISC / MP3 PLA YER WITH ANTI-SHOCK 120SEC. INSTRUCTION MANUAL PLEASE READ CAREFULL Y BEFORE USING YOUR UNIT MODEL: JX-CD910.
E.1 CONTROL OPERA TION AND FUNCTION POWER SUPPL Y Y our CD player requires 2 size “AA” alkaline batteries (not included), or use the AC adapter (not included) AC ADAPTER OPERA TION Plug one end of the AC adapter into the DC 4.5V jack, then plug the other end into AC wall outlet.
E.2 DO NOT CHARGE CONTINUOUSL Y FOR 24 HOURS OR MORE. DOING SO CAN CAUSE THE PERFORMANCE OF THE RECHARGEABLE BA TTERIES TO DETERIORA TE. NOTE: Y ou may play DISC’S whilst charging the batteries.
E.3 4. Close the disc compartment, press PLA Y/P AUSE button, the disc will begin to spin, the display will indicate “CD 45 sec.”then change to “CD MP3” and “MP3” flash in the display, a while later will play the first song and CD will indicate in the display.
E.4 NOTE: Programming is possible in the STOP mode. 1. Press the PROGRAM button in the STOP MODE. “00P-01” appears in the display. 2. Select the first track to be programmed using or button. 3. Press the PROGRAM button again to enter the track selected in to the memory.
E.5 1. Press the CD Mode button till the ‘INTRO’ appear in the display. 2. The first 10 seconds of the tracks will be played once, then stops. 3. T o stop the intro play and start the normal play. Press the CD Mode button twice more or press the stop button.
E.6 CLEANING THE CABINET Wipe with a soft cloth. If the cabinet is very dirty, dampen (not dripping wet) the cloth with a weak solution of soap water , and then wipe clean. HANDLING COMP ACT DISCS 1. This unit is designed to play compact discs bearing the identification logo to the right.
E.7 TROUBLE SHOOTING GUIDE Replace both batteries. Check the AC adapter connection at AC outlet and side of set. Re-insert disc with label side facing up. T ry another audio compact disc. Close lid securely (push down left corner of door) T ake out the CD and leave the CD door open for about an hour to dry the moisture condensation.
An important point after buying a device Jwin JX-CD910 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jwin JX-CD910 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jwin JX-CD910 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jwin JX-CD910 you will learn all the available features of the product, as well as information on its operation. The information that you get Jwin JX-CD910 will certainly help you make a decision on the purchase.
If you already are a holder of Jwin JX-CD910, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jwin JX-CD910.
However, one of the most important roles played by the user manual is to help in solving problems with Jwin JX-CD910. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jwin JX-CD910 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
