Instruction/ maintenance manual of the product JX-CD8700 Jwin
Go to page of 10
OWNER'S MANUAL STEREO HI-FI SYSTEM with 4 CD CHANGER / MP3 and AM/FM PLL SYNTHESIZED TUNER Visit our Web Site: http://www.jwin.com R MODEL JX-CD8700 JXCD8700V10M12EN05062005.
1 2 TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PRESENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOC K HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
INSTALLATION 3 4 INSTALLATION (Wall Mounting) Secure the center unit an d speakers on the wall (as show be low) using 8 dowels and 8 screws (supplied). SPEAKER ASSEMBLY AND DISASSEMBLY MAIN UNIT ASSEMBLY AND DISASSEMBLY STEP 1 STEP 2 STEP 3 STEP 1 STEP 2 STEP 3 CAUTION - This product may be use only with JW IN model JX-CD8500 stand.
5 6 CONTROLS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Front view POWER Button Used to turn the system on and off RIGHT CD DOOR DISPLAY VOLUME UP/DOWN Button Used to select .
7 Antenna connectio n You can achieve acceptable r eception if you use the supplied FM “pigtail” a ntenna. If so, the antenna should be elongated and not coiled or bunched up.
9 10 AMPLIFIER AND RADIO FACILITY Switching the unit ON Press the " POWER " button (1)/(32) to tur n on the system. Operating mode selection The different operating modes can b e directly selected using the buttons “PLAY / PAUSE ” (13)/(38) for CD operation and “TUNER / BAND” (7)/(53) for radio reception (3).
11 DIGITAL CLO CK AND TIMER Setting the digi tal clock 12 To switch to the clock display while in tuner and CD modes, press DISPLAY MODE . The time is displayed for approximately 10 seconds. The time is also displayed when the unit is turned off. Setting the timer You can set automatic switch- on and switch-off times with the built-in timer.
13 14 PLAYING MP 3 DISCS Inserting and ejecting a n MP3 disc The CD compartment (2)/(26) are open ed for inserting or removing com pact discs by pressing the " OPEN / CLOSE " (15)/(16) buttons. Insert the MP3 disc with the unlab elled side facing the unit.
15 Pause / stop To briefly pause playback, press the “ P L A Y / PAUSE” button (13)/(38). Display indicates: Press “ PLAY / PAUSE” button again to restart play. To end the playback, press the “S T O P ” button (11)/(45). 4. Press the “ TUNING + or TUNING -” button (18) or (20) to select desired tr ack.
17 SPECIFICATIONS Power requirement AC 120V ~ 60Hz DC Battery size “CR2032” for Remote Handset Power consumption AC 35 Watts Dimension Unit 440 (W) x 171.5 (D) x 1075 (H)mm Speakers 207.7 (W) x 171.5 (D) x 1065 (H)mm GENERAL RECEIVER SECTION Receiving bands AM/FM Tuning range AM 530 - 1710KHz FM 87.
An important point after buying a device Jwin JX-CD8700 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jwin JX-CD8700 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jwin JX-CD8700 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jwin JX-CD8700 you will learn all the available features of the product, as well as information on its operation. The information that you get Jwin JX-CD8700 will certainly help you make a decision on the purchase.
If you already are a holder of Jwin JX-CD8700, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jwin JX-CD8700.
However, one of the most important roles played by the user manual is to help in solving problems with Jwin JX-CD8700. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jwin JX-CD8700 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
