Instruction/ maintenance manual of the product JX-CD477 Jwin
Go to page of 8
PORT ABLE COMP A CT DISC PLA YER WITH ANTI-SHOCK 10SEC. INSTRUCTION MANUAL PLEASE READ CAREFULL Y BEFORE USING Y OUR UNIT MODEL: JX-CD477 OPEN.
E.1 LOCA TION OF CONTROLS CONTROL OPERA TION AND FUNCTION POWER SUPPL Y Y our CD player requires 2 size “AA” alkaline batteries (not included), or use the AC adaptor 4.5V 600mA (not included) AC ADAPTOR OPERA TION Plug one end of the AC adaptor into the DC 4.
E.2 3. Slide the charge switch to ON position to start charging. The charge indicator will light up. USE ONL Y THE AC ADAPTOR FOR CHARGING. 4. After 15 hours, please unplug the AC adaptor and slide the recharge switch to OFF position. DO NOT CHARGE CONTINUOUSL Y FOR 24 HOURS OR MORE.
E.3 3. Hold the disc with the label side up and press it onto the spindle until it “clicks” into place. 4. Close the disc compartment, press PLA Y/P AUSE button, the disc will begin to spin, the display will indicate “01”, play will begin immediately from track number 1.
E.4 1. Press the PROGRAM button in the STOP MODE. The “PROG” appears in the display. 2. Press the skip button ( ) to select the first track to be programmed. 3. Press the PROGRAM button again to enter the track into the memory. 4. Repeat steps 2 to 3 to program other track till you finish.
E.5 THE ANTI-SKIP MEMORY FUNCTION (10SEC.) The digital anti-skip function uses semiconductor memory to prevent the sound from skipping when the unit is subjected to shocks and vibration during play. 1. When the ASP button is pressed during play, the ANTI-S indicator appears in the display and the digital anti-skip function turns on.
E.6 CLEANING THE CABINET Wipe with a soft cloth. If the cabinet is very dirty, dampen (not dripping wet) the cloth with a weak solution of soap water , and then wipe clean. HANDLING COMP ACT DISCS 1. This unit is designed to play compact discs bearing the identifica- tion logo to the right.
E.7 TROUBLE SHOOTING GUIDE Replace both batteries. Check the A C adaptor connection at AC outlet and side of set. Re-insert disc with label side facing up. T ry another audio compact disc. Close lid securely (push down left corner of door) T ake out the CD and leav e the CD door open for about an hour to dry the moisture condensation.
An important point after buying a device Jwin JX-CD477 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jwin JX-CD477 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jwin JX-CD477 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jwin JX-CD477 you will learn all the available features of the product, as well as information on its operation. The information that you get Jwin JX-CD477 will certainly help you make a decision on the purchase.
If you already are a holder of Jwin JX-CD477, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jwin JX-CD477.
However, one of the most important roles played by the user manual is to help in solving problems with Jwin JX-CD477. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jwin JX-CD477 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
