Instruction/ maintenance manual of the product VR-609 JVC
Go to page of 102
DIGITAL VIDEO RECORDER VR-609 INSTRUCTIONS Thank you for purchas ing this JVC product. Before operating this unit, please read the instructions carefully to ensure the best possible per formance. For Customer Use: Enter below the serial No . which is located on the bottom of cabinet.
.
-- 3 -- JVC VR-609 - C O N T E N T S - 1. Im por ta nt Safeguards ------------------------------ --------------------------------- ------ 6 2. Part Names and Feat ures ------------- ------------------ ------------------------ ---------- 17 2.
-- 4 -- JVC VR-609 4.1 .3 REC -------------- --------------- --------------- ------------ ---- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - 36 4.1 .4 PLA Y -- ------------- --------------- --------------- ------ --- -- -- -- -- - --- -- -- -- -- -- -- -- -- -- -- -- 3 6 4.
-- 5 -- JVC VR-609 5.7 .3 HDD M ana gem ent ----------------------- ----------------- ------------------------ 6 8 5.7. 4 Backup ------------------------- ---------------- -------------- --------- ------------------ ------------------- 72 5.
-- 6 -- JVC VR-609 9. This appliance should be o perated o nly from the type of power source indicated on the marking label . If you are not sure of the type of power supplied to your home, c onsult your dea ler or l ocal power company. For appliance designed to operate from battery power, refer to the operating instructions.
-- 7 -- JVC VR-609 POWER SYSTEM Connection to the mains supply This unit should be used with 120V AC onl y. CAUTION: To prevent electric shocks and fire hazards, DO NOT use any other power. NOTE: The rating plate (serial number plate) is on t he top of the unit.
-- 8 -- JVC VR-609 IMPORTANT (In the United Kingdom) Mains Supply (AC 230 V) WARNING – THIS APPARATUS MUST BE EARTHED The wires in this mains lead are colour ed in accordance with the following code.
-- 9 -- JVC VR-609 WARNUNG Bei dem Gerät handelt es sich um ein Klasse-AProdukt. In Haushaltsumgebungen kann ein solches Produkt Funkstörungen verursachen. In einem solchen Fall muss der Benutzer geeignete Maßn ahmen ergreifen. Für Kontinentaleuropa Nicht für den Gebrauch in Großbritanni en.
-- 10 -- JVC VR-609 PARA EUROPA CONTINENTAL, ETC. No se utiliza en Reino Unido. INSTRUCCIONES DE SEGURIDAD(VR-609E) SISTEMA ELÉCTRICO Conexión a la alimentación Esta unida d funciona bajo una tensión de e ntre 220 V y 240 V CA, 50 Hz/60 Hz.
-- 11 -- JVC VR-609 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION To prevent electric shock, do not open the cabinet. No user serviceable parts inside. Refer servicing to qualified service person nel.
-- 12 -- JVC VR-609 SICHERHEITSVORKEHRUNGEN(VR-609U/E) ACHTUN G: UM DER GEFAHR VON BRÄNDEN UND ELEKTRISCHEN SCHLÄGEN VORZUBEUGEN, DARF DIESES GERÄT WEDER DEM REGEN NOCH HOHER FEUCHTIGKEIT AUSGESETZT WERDEN. ACHTUN G Um elektrische Schläge zu vermeiden, das Gehäuse nie öffnen.
-- 13 -- JVC VR-609 AVERTISSEMENT: POUR EVITER LE RISQUES D’INCENDIE OU D’ELECTROCUTION, N’EXPOSER L’APPAREIL NI A L’HUMIDITE NI A LA PLUIE. ATTENTION Pour éviter les chocs électriqu es, ne pas ouvrir le coffret. Aucune pièce à l’intérieur n’est à rég l er par l’utilisateur.
-- 14 -- JVC VR-609 ADVERTENCIA: PARA REDUCIR EL RIESGO DE INCENDIO O DESCARGAS ELÉCTRICAS NO EXPONGA ESTE APARATO A LA LLUVIA O A LA HUMEDAD. ¡ATENCIÓN! Para evitar des cargas el éctric as no abra el aparato. El interior no contiene ninguna pieza para su utilización por parte del usuar io.
-- 15 -- JVC VR-609 AVVERTENZA: PER RIDURRE IL RISCHIO DI INCENDIO O DI FOLGORAZIONE NON ESPORRE L’APPARECCHIO ALLA PIOGGIA O ALL’UMIDITA’. ATTENZIONE! Per prevenire l e scosse elettriche, non apr ire il pannello di copertura (o la parte posteriore).
-- 16 -- JVC VR-609 PRECAUTIONS WA RN IN G It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast, or cable programme and in any literary, dramatic, musical or artistic work embodied therein.
-- 17 -- JVC VR-609 User Manual VR-609 Rack Mount Bracke t Rack Handle Power Cord Rubber Foot 2. 2. Part Names and Features 2.1 Basic Organi zation of DVR System : In this Instructions, Digi tal Video Re corder is written a s "D VR ". Conte nts and shap e can be differe nt.
-- 18 -- JVC VR-609 1) High quality digi tal recording Output and playback H igh-Resolution d igital record ing by using Wave let compression. 2) Simple opera tion Simple operation by jog /shuttle. 3) Simple setting Enables simp le instal lation and operation with bas ic setting and came ra inputs.
-- 19 -- JVC VR-609 15) Automatic check and recovery function The system is designed for continuous, fault-free operation with built-in, self-monitor ing functions that monitor each component of the system and will automatically restart into the previous mode if a system failure is encountered.
-- 20 -- JVC VR-609 2.3 Preparation of installation ■ Putting on a lev el place (1) Attach rubber fe et. - Attach 4 rubber feet in the bott om surface of the equi pment with 4 screws pro vided (M3 x 11mm).
-- 21 -- JVC VR-609 2.4 Part Names and Description • Front ① Operate Swi tch : Operate ON/OFF switch. Operate o n/off by pr essing this butto n for about 5 seconds. During s ystem star ting, it is displ ayed "9 CH Digital V ideo Recorder" and "Preparing s ystem.
-- 22 -- JVC VR-609 ④ IMAGE SEQUENCE Bu tton : This button is for replay PB scr een to IMAGE SEQUENCE mod e. ▲ (up) Button : Menu Navigati on Button. Mo ves cursor up. ⑤ ZOOM Butt on : This is used to zoom a freeze-fra me in live or playback mod e.
-- 23 -- JVC VR-609 • Rear ① LAN : Enables screen search and contro l via Network. (Please use a cat egory 5 cable with a shield.) ② USB Port 1,2 : For backup with e xternal FDD or memor y stick. It does not work both USB1 & 2 at the same tim e.
-- 24 -- Digital Video R ecorder 3. 3. Explanation and Application 3.1 Basic Schematic of the DVR System : This system can record up to 9 composite vide o signals. Ability to check multiple screens during p layback by using moni tors & VGA units. It supports screen search, monitor, an d remote control through the Network.
-- 25 -- JVC VR-609 USB Connecto r LAN Co nnector Alarm IN Connec tor VGA OU T Co nnector Y/C OUT Connector MONITOR OUT 1,2 Connector SPOT OUT Connector RS-485 Connector IEEE 1394 Co nnect or VIDEO IN Co nnector AUDIO OUT Connector AUDIO IN Co nnector Alarm OU T Co nnector 3.
-- 26 -- JVC VR-609 3.3 Pan/Tilt Camera Connection and Control It is possible to control the Pa n/Tilt camera w ithout special de vices. The Pan/Tilt camera sup ports RS-485 and is give n an ID for paral lel connect ion. Easy to insta ll from the menu screen a nd pos sible to c ontrol by using the Jog Shuttle .
-- 27 -- JVC VR-609 ● About settin g values of VR-609, please refer t o 5.1.2 Camera det ails and 5 .1.3 Pan/Tilt Model Sel ect. ● For informati on of other mo del, consult your near est JVC deal e r.
-- 28 -- JVC VR-609 3.4 External Product Connections and Applications 3.4.1 External Product Connection of ALARM INPUT and Application There are 9 alarm jacks for ext ernal de vices. Able to set-up RE C ON/ OFF and Digital out moti on accord ing to ALARM IN signal s.
-- 29 -- JVC VR-609 3.4.2 External Product Connection of ALARM OUT and Application Supports up to 4 sep arate alarms for moti on control or alarms. Possible to insta ll out put-event s to each out terminal from the menu.
-- 30 -- JVC VR-609 3.5 Installation and A pplication for Network Interface 3.5.1 Connection and Installation for Remote Control Supports Web serv er, remote contr ol, and remot e file transf er d ue to 10/100mega Ethernet I/F. Organization of Remote Control 1) Connect Net work line, whic h h as a fixed IP, by using the hub .
-- 31 -- JVC VR-609 IP Address : ____.____.____.____ Subnet Mask : ____.____.____.____ Gateway : ____.____.____.____ DNS : ____.____.____.____ Web Server Por t Number : ___ We hig hly reco mmend you consu lt the Netwo rk M anager. Note ● IP Addre ss : T his is the name of the product in TC P/IP.
-- 32 -- JVC VR-609 3.6 Application of Remote Control Software 3.6.1 Using the "remote control software" This is for view ing live or searching pl ayback screen s from a remote locati on. [ Quality of the live s creen depends on the recording qual ity a nd Network condition.
-- 33 -- JVC VR-609 3.6.3 Live Screen Search This is for se arching 1, 4, 9 channels simultane ously from a rem ote location. It is possible to control the Pa n/Tilt camera, which allows to s et-up the posi tion of the Pan/Tilt cam era from a remote l ocation.
-- 34 -- JVC VR-609 3.6.5 Client Sof tware The Client Software is at an attached C D-ROM, and if use this i nstead of the we b browser, more highly effic ient op eration can b e perform ed.
-- 35 -- JVC VR-609 4. Function Explanation and Menu Setting This system can s et-up the motio n cond itions o f the camera, rec ording conditions, alarms, audio, and s ystem settin gs from the mo nitor me nu.
-- 36 -- JVC VR-609 ● Alarm Reset butto n is for sto ppin g the exter nal alarm motion. ● AUTO Button is ON/OFF . As pressi ng this buttons , the divided screen is switched automatically. 4.1.3 REC 4.1.4 PLAY ● By pressing this button, re cording starts.
-- 37 -- JVC VR-609 ● JOG & SHUTTLE can s earch by frame i n play mo de b y using JOG when it is paused ( ll ) and possi ble to quick search by an angle of the shuttle. ● At the menu settin g, it is poss ible to mo ve the positi on or change the value by usin g JOG .
-- 38 -- JVC VR-609 4.1.7 Explanation of Image Sequence and Triplex ● IMA GE SEQU ENC E : O ne pla yback channe l is repla yed to the divide d scre en field by field in sequ ence.
-- 39 -- JVC VR-609 5. Main Menu Camera C ontrol, Camera Detai ls, Pan / Tilt model. set-up Alarm Name, Alarm Link. set-up Audio. Select 8 screen group which is displayed when you press the “User” button. set-up Manual Recording, Schedule, Alarm Recording.
-- 40 -- JVC VR-609 5.1 Camera Setup Make sure all of the Pan/ Tilt cameras are the same manuf acturer . Use the cameras which are sup ported by the same proto col. 5.1.1 Camera Control 1) RS-485 enables lon g distance transf er. 2) Possible t o conn ect in parallel .
-- 41 -- JVC VR-609 5.1.1.2 How to Use 1) Checks camera ID set up value from the camera s etup menu. 2) Selects Pan/Tilt Co ntrol from the me nu. 3) Selects moti on by Jog or right/left button. 4) Moves shuttle left or ri ght. Checks whether camera ID and Pa n/Tilt camera ID are the same i ns tallation if the Pan/Tilt camera do es not activa te.
-- 42 -- JVC VR-609 5.1.2 Camera Details Setup cha nnel ● Installs Name, Camera ID (Pan /Tilt Camera), Mod el and C olor ( Brightness, Contrast, Saturation, Hue) o f each channel. 5.1.2.1 How to Setup 1) Checks the channel nu mber as i ndicate d at the bottom o f the tab, and then checks whether the backgroun d is the correct scr een.
-- 43 -- JVC VR-609 5.1.2.2 Camera Name ● Name : Possible t o create an alphanum eric nicknam e of up to 1 6 characters (including symb ols) as show n below. You can see t he next character re peatedly b y using Jo g. How to Use 1) Selects Nam e by Jo g.
-- 44 -- JVC VR-609 5.1.2.4 Adjustment ● Possible to install each input vi deo color ( Brightne ss, Contrast, Saturation ) value as a number 0~100 and Hue ca n be installed as a numb er -128~127 . Please, install a pro per value for a back ground checki ng scree n .
-- 45 -- JVC VR-609 5.1.3 Pan/Tilt Model Select ● How to Setup 1) Connect t he Pan/Tilt camera to the RS-485 port. 2) Select the same driv e, which is selected from the “Pan /Tilt Model S elect” menu. 3) Set-up the Camera ID at “Camera Setting”.
-- 46 -- JVC VR-609 ● Selects baud rate for each camera. (Fact ory default is 9600 bp s) * If you connect with TK-C 676/TK-C655, please se lect "9600 bps".
-- 47 -- JVC VR-609 5.2 Recording Setup 5.2.1 Manual Recording Manu al Rec ording is for setup recording condition of eac h chann el a s pres sing R EC button when it is not reco rded ac cording to sched ule. ● Possible t o control reco rding f or each channel as pr essing R EC buttons.
-- 48 -- JVC VR-609 ● Each symbol mea ns as bel ow. In case Schedu le Recordi ng b ox is checked, recordi ng is star ted according to schedule r egardless of Manual Recordi ng.
-- 49 -- JVC VR-609 5.2.2 Schedule ● Schedules recording by da te, time and channels. ● Schedules record ing for s pecific day. ● If it chang es from a menu, a clock mark is display ed on the scr een lower right, and it will be in the stat e of T IMER STANDBY or TIMER RECORD.
-- 50 -- JVC VR-609 ●: A l w a y s R e c o r d i n g . A : Alarm Recording. M : Motio n Recordi ng. ● F/F=fps/fps : The first ‘ fps ’ means fiel d rate of Always Rec ording, The sec ond ‘ fps ’ means fi eld rate o f Alarm Recordin g/ Moti on Rec ording.
-- 51 -- JVC VR-609 5.2.2.2 How to Setup ● Record ing Schedule is set-up in block. Mi nimum block is a n hour . A time setting cannot be performed from the remote control unit . Please use the front pane l buttons. ● How to Setup Recordin g Schedule Block 1) As using left/ri ght directio n button, designates time block at the same chann el.
-- 52 -- JVC VR-609 ● When the yellow bar is locat ed in the right si de of a sp ecific block and you press the left arrow button, the n the source confi guration o f t he block in the right s ide o.
-- 53 -- JVC VR-609 (10) Press right button, and move the sp ecific block. (11) Press display button, an d a yellow bar will be displayed on the left-hand sid e of a specific block.
-- 54 -- JVC VR-609 5.2.2.3 Audio Recording 5.2.2.4 Setup Days of the Week 5.2.2.5 Copy Schedule ● When you place the ba r in AR and press the “E nter ” button, then you will be able to select Audi o Record ing O n and Audio Recordi ng off as bel ow.
-- 55 -- JVC VR-609 5.2.2.6 Specific Day Schedule ● You c an configu re the record ing sched ule of a spec ific day by p ressing “Enter” button i n the ‘Specific Da ys…’. ● If it change s from a menu, a clock mark is d isplayed on the scr een lowe r right, and it will be in th e stat e of TIMER STANDBY or TIMER RE CORD.
-- 56 -- JVC VR-609 As each input channel is selected, the maximum recordi ng Field /S ec is changed as in the below tabl e. ( Only for NTSC ) As each input channel is selected, the maximum recordi ng Field /S ec is changed as in the below table. ( Only for PAL ) Possible t o not be 60 fi eld accor ding to input channel nu mber.
-- 57 -- JVC VR-609 5.2.3 Alarm Recording ● Set-up recording time which is before event and after event wh en its’ Alarm/Motion Events. ● The RECORD Indicat ion LED a nd ONSCREEN dis play might be display ed 10 - 20 seconds longe r than actual record tim e.
-- 58 -- JVC VR-609 ● How to Setup ⓐ Jog direction of field se tup. ⓑ T he user field setup is moved t o the place by j oggi ng. The fir st location an d the last locatio n can be sel ected b y clicking ENTE R. ⓒ Area field s etup is moved to the place by jogging and c an chec k the field by using ENTER.
-- 59 -- JVC VR-609 ●M O D E : N T S C/ P A L ● M ax imum F ield Ra te : 60 F/S (N TSC ) : 50 F/S (P AL) ● Record ing Channel Nu mber : 9C h ● Re solutio n : 72 0 * 24 0 (NT SC) : 720 * 288 (PAL) (You can control recording qualit y from Manual Recording of the Recording Setup.
-- 60 -- JVC VR-609 5.3 Alarm Setup Alarm Setup is used for co nnecti ng with exter nal devices such a s alarm or buzzer. 5.3.1. Alarm Name How to Se tup a. Select alarm channel by usi ng Jog. b. Selects n ame by usin g p lay, right/left, and jog. c. As jog is rotate d from right to left, characters chang e.
-- 61 -- JVC VR-609 5.3.2 Alarm Link Setup ● Events : Select condition of Alarm O ut. Alarm inputs a re 9EA and Ala rm o utputs a re 4EA. ● Ala rm Lin k Exp lanat ion The above me nu will display as checkin g Alarm Link butto n. 1) Alarm (left of the above p icture) : Sets up which alarm wi ll be output when alarm occurs.
-- 62 -- JVC VR-609 5.3.2.2 Events ● Alarm has occurred accordin g to select events such as Disk Ful l, Admin PW. Changed Video Loss, Motion Detec t. ● Checks eve nt you want to de tect from the Eve nts menu by usin g Jog and ENTER button. ● Each event type is ind icated by the following.
-- 63 -- JVC VR-609 5.4 User Define Screen User can org anize the scree n to your perso nal prefere nce by usi ng the user button. It is very conv enien t if you use AUTO functi on at User Scre en. ● How to Setup 1) Select one of 5 variati ons of multi-scree n vie ws by using le f t/right buttons or Jog.
-- 64 -- JVC VR-609 5.5 Audio Setup ● Audio is capable of recording one chann el. ● Sampling Rate i s 8 KHz. ● Bypass is possi ble to Audio Out as recordin g Audio.
-- 65 -- JVC VR-609 5.6 Menu Setup ● Language is set-up at Engli sh an d able to change to French and Spanish on VR-609U. (English, German, Fre nch , Spanish, Italian, Portugues e, Chinese are av ai.
-- 66 -- JVC VR-609 5.7 System Setup Back up data by usin g HDD. Network Setup, Date/Time Setup, Admin Password, Web Pass word, U pdate Program Check syste m version. Select Main/ Backup HDD. set-up motion cont ents of Auto button. set-up Spot Output and VGA Output.
-- 67 -- JVC VR-609 ● How t o Setu p 1) Log rec ords all actions which occurred o n the system while o perating. 2) You can check “Lo g” by the follow ing : ① Set-up start date, which will be marked on the LOG, by Jo g. Select year/month /day by using the right/left button.
-- 68 -- JVC VR-609 5.7.3 HDD Management ●s e t - u p H D D Main HDD : Can be used for ba sic REC. Backup : For backup HDD. ● set-up REC mode of the main HDD. ● s et-up overwr ite mode. ● Log clear functio n. ● set-up HDD using percent. The state of the 1st Bu ilt- in HDD.
-- 69 -- JVC VR-609 ●H D D I n f o r m a t i o n ● This is for inform ation of externa l IEEE 1394 HDD . As c lickin g the "Indic ate" button , you ca n know which HDD is. ● This is for inform ation of Local HDD . Please tur n off the power when you connec t external IEEE1394 or USB with DVR for the purpose of avoiding damage .
-- 70 -- JVC VR-609 ● It is displayed when HDD is almost full. ● How to Setu p New HDD 1) Add new HDD . ① W hen addi ng a new HDD, you must turn the power off . ② Backup HDD is o nly one. ③ It is better to clear the data when an HDD is re gistered for the firs t time.
-- 71 -- JVC VR-609 2) Overwrite Disk When Dis k Full Monitor scre en dis plays a similar mess age as the f ollowing acco rding to overwrite on /off. On Main HDD is full, it starts to overwrit e old DATA. Off When Main HDD is full (100%), recording is stopped.
-- 72 -- JVC VR-609 5.7.4 Backup ● Record a p ortion of the ma in HDD content to a Backup HDD. ● Must have more than on e Backup H DD and recording content of set up date. ● Possible to backup HDD and CD. ● How to Setup 1) Set-up start and en d dates by usi ng Jog and the right/left b utton.
-- 73 -- JVC VR-609 ● This is w arning m essa ge can cellation will damage the CD w hile it is being backed u p. ● This message is displayed i f there is no CD for backup when backup at CD. ●This message is di splayed if th ere is no CD -reco rder when ba ckup a t CD.
-- 74 -- JVC VR-609 ● How to connec t removabl e HDD The jumper o f HDD which connects additionally , set-up a s s lave . (Refer to H DD’s user m anual fo r setup jum per.) ! If Removable HDD is set-up for backup, thi s HDD’s contents are not be able to repla y from th e remote place.
-- 75 -- JVC VR-609 5.7.5 Auto Select ● Select Delay an d Skip of the Auto Switch. ● How to Setup 1) Auto Select function is for automatic switchov er of the Moni tor scree n. 2) Delay of the Auto Swi tch range is 1 ~ 300sec. 3) All Channels are On w hen the s ystem starts f or the first tim e.
-- 76 -- JVC VR-609 5.7.6 Video Output ● Select the Spot Out channel. ● Select VGA output.( If you check the VGA output, monitor screen quality is worse than be fore.) ● If there is no VGA outp ut on the VGA output port, press the STO P button and DISPLAY button at the front button for ab out 3sec then VGA outp ut will be on automatically.
-- 77 -- JVC VR-609 5.7.7 Administration This is for remote security. set-up date and time. This is for Setting passw ord. This is for setting web password. Covert Cha nnel allows Administrator to select channels th at only they can view. This is for locking front button.
-- 78 -- JVC VR-609 4) Select the number you want by using Jo g. IP Address : ______ .______.______.___ ___ Subnet Mask : ___ ___.______.______ .______ Gateway : ______.__ ____.______.______ DNS : ______.__ ____.______.______ Web Server Port Number : _ ___ Notice (Possi ble to have a Network pr oblem when its instal lation.
-- 79 -- JVC VR-609 ● Set-up Date and Time , which will be used in the system. ● Set-up “Date Displa y”. 5.7.7.2 Date/Time Setup ● How t o Setu p 1) Move to the place you want to chang e the setup by usin g up/d own buttons or Jog. 2) Select conte nts to chang e by using the ENTER button.
-- 80 -- JVC VR-609 5.7.7.3 Password ● You can us e a passwo rd for syste m security. ● Password mode will di splay as click the check bo x. ● T he password must 4 di git numbers. ● Enter “New Password” and “Conf irm” through Channel Selecti on but tons.
-- 81 -- JVC VR-609 ● This messag e is displ ayed when ent er “MENU” after s etting passwo rd. ● Enter the Password. ● If you input wrong password, you can not enter the MENU. If you input wron g password 3 time s, MENU screen w ill disapp ear .
-- 82 -- JVC VR-609 ● How to Setup 1) Check the box to activate passw ords. 2) Select a new pa ssword and the n enter aga in for co nfirmati on. 3) Select a new pa ssw ord by using Jog. 4) Enter “New Passw ord” and “C onfirm” through Channel Selection buttons.
-- 83 -- JVC VR-609 5.7.7.5 Covert Channel ● Covert Channel Selecti on shou ld be setup to use passw ord. ● The selected chan nel at Monit or/Playback is o nly possi ble to r ecord and live screen o r playback scree n is dis played with V-Los s. If you want to see p layback scree n, you must use Admin istrator Password.
-- 84 -- JVC VR-609 ●E v e n t s : DVR will s end an email when any of the checked events occur . ● Conditions : It sends ema il at Start and End ti me as setup. 1) Start/End : Defin es the time i nterval during which emails wi ll be sent based upon the selecte d events.
-- 85 -- JVC VR-609 5.7.8 About System 5.7.7.7 Lock Front Button ● Lock Fr ont But ton : This selection will lock the front pa nel buttons to pr event unauthorized op eration. Only the Me nu and Operati on button will operate. ● W hen you press the L O CKED button, the message is displayed o n "the button is locked" for a moment.
-- 86 -- JVC VR-609 5.7.9 Default in Setup Menu ● Design an d specificati ons are subject t o change without notic e. Came ra Setup Recordin g Setu p Alarm Sett ing Name : Not install ed Control ID : the sam e as a ca mera N o.
-- 87 -- JVC VR-609 5.8 Monitor Display 1) GREEN : Camera is Recording. ( Always recording) 2) RED : It means it is bein g Event rec ording by motion detecti on or ala rm input. 3) BLUE : It means DV R is on mo nitorin g. (No recording, just for monitori ng) 4) WHITE : No input signal status.
-- 88 -- JVC VR-609 5.9 Playback ● The a bove pictur e will be displ ayed by pressing the PLAY Butto n. ● How t o Setu p 1) Please en ter the date and ti me. 2) Press "Play Start", the playba ck screen is displayed accordin g to the date value.
-- 89 -- JVC VR-609 ● Motion b y Mi x Button 1) DISPLA Y : Recording channe l is displayed with a 1 /4/9 screen. Because “Multi” is able t o check several chann els simultaneo usly , it is useful to search quickly.
-- 90 -- JVC VR-609 ● You can powe r off by using the front operate switch. 5.10 Power Off If sys tem is to not be used fo r long periods of time, turn off the rear pa nel power switch. If the rear po wer switch is in the on position, D VR w ill reboot aft er a power failure.
-- 91 -- JVC VR-609 6. External Backup 6.1.1 Connect with External USB Port USB1.1 port will allow you to con nect to a FDD, Zip Dri ve or US B memory device t o record still images from the DV R. 6.1.2 How to Backup Conne ct with external USB port a fter selecti ng the image i n full screen mode.
-- 92 -- JVC VR-609 6.2 External IEEE 1394 Port 6.2.1 Connect with External IEEE 1394 Port The IEEE1394 port is used t o conn ect to extern al devices a s a H DD or CD-RW drive to back-up images. 6.2.2 How to Connect with IEEE 1394 Port Conne ct with external IEEE1394 po rt as blow picture.
-- 93 -- JVC VR-609 7. Remote Controller 7.1 Outline ! For the first step , you should g ive an ID for contro l DVR by one remote controller. 1) Press one of IN PUT b utton (1~9 ) and STOP on DV R at the sam e t ime then the numbe r which you pre ssed w ill be the ID .
-- 94 -- JVC VR-609 7.2 Details ● REC Button : When the REC LED is on, D VR is recording as per set-up instructio ns. ● ALARM RESET Button : Stops the Alarm Output. ● INPUT Button :These bu ttons are used to select the screen monit ors and to chan ge the c hannel se ttings at the menu.
-- 95 -- JVC VR-609 ●M E N U : This button is f or selecting or canceling the mo nitor setup m enu mode. MULTI : This button is for cancelin g Image Sequence or Triplex mode. TRIPLEX : To see live and PB scree n at the same time as makin g replay scree n to PIP mode.
-- 96 -- JVC VR-609 ② Load in 2 batter ies ( AAA). ・ Please insert the pole in fir st. 30° 30° ● Working Range of Remote Control ler Signal Recei ver Within 6m Supports to use as belo w. ( Standard DVR rece iver) · Distance : within 6m Angle : within 30˚ ! ･ Guide on bat tery replacement.
-- 97 -- JVC VR-609 8. Troubleshooting Symptom Cause Action Power cann ot be turned on. ● Is the power cable p roperly conne cted? ● Plug the supplied power cable to the outlet [REC] an d [PLAY] buttons do not work. ● Is the Operation Lock turned on? ● Turn off the Operat ion L ock REC cannot be started even if pressing [REC] button.
-- 98 -- JVC VR-609 Parts Item VR-609 U/ E Numb er of Channels Q’ty (EA) 9 Video Signa l NTSC PAL Signal Input Composite 1.0V With Loop Output, BNC Compr ession Type Wavel et based Resolu tion (H*V) 720*240 720*2 88 Compressi on 7 Mode Q’ty (EA) 2 Video Leve l (Vp_p) 1.
-- 99 -- JVC VR-609 Alarm Input 9EA, Low Active Alarm , TTL Level Alarm Output 4 EA, Low Active Alarm, TTL Level Open collector Alarm Input, V-loss, Mo tion, Disk Full, Admin-PW Changed Date & time, CH, Name, Event 10 Step 10 Step 25F/1sec ~ 1F/60sec Fuse T6.
-- 100 -- JVC VR-609 10 432 88 431 14 11.5 Specificat ions a nd appea rance o f this un it are s ubject to c hang e for i mprovement without prior not ice.
.
Printed in Korea LLT0067-001A VR-609 DIGITAL VIDEO RECORDER is a registered trademark ow ned by VICTOR COMPANY OF JAPAN, LTD. is a registered trademark in Jap an, the U.
An important point after buying a device JVC VR-609 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC VR-609 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC VR-609 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC VR-609 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC VR-609 will certainly help you make a decision on the purchase.
If you already are a holder of JVC VR-609, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC VR-609.
However, one of the most important roles played by the user manual is to help in solving problems with JVC VR-609. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC VR-609 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
