Instruction/ maintenance manual of the product UX-M3R JVC
Go to page of 24
For Customer Use: Enter below the Model No . and Serial No. which are located either on the rear , bot- tom or side of the cabinet. Retain this inf or mation f or future reference . Model No . Se r ia l N o. LVT0808-005A [A] UX-M3R — Consists of CA-UXM3R and SP-UXM3.
Caution –– STANDBY/ON button! Disconnect the mains plug to shut the power off completely. The STANDBY/ON button in any position does not disconnect the mains line. The power can be remote controlled. IMPORTANT FOR LASER PRODUCTS REPRODUCTION OF LABELS 1 CLASSIFICATION LABEL, PLACED ON REAR ENCLOSURE 2 WARNING LABEL, PLACED INSIDE THE UNIT 1.
– G-2 – 15 cm 15 cm 15 cm 1 cm UX-M3R 1 cm 10 cm 15 cm 15 cm UX-M3R Caution: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1 Front: No obstructions and open spacing. 2 Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.
– 1 – Introduction W e would like to thank y ou for pur chasing one of our JVC pr oducts. Bef ore operating this unit, read this manual carefull y and thoroughl y to obtain the best possib le performance fr om your unit, and retain this manual f or future reference.
– 2 – Contents Location of the Buttons and Controls ..................... 3 Front Panel ................................................................ 4 Remote Control ......................................................... 5 Getting Started .
– 3 – Location of the Buttons and Controls Become familiar with the b uttons and controls on your unit. Front Panel DISPLA Y MODE PHONES PROGRAM REC STOP/CLEAR PLA Y/PA USE PRE EQ /HBS VOLUME REPE.
– 4 – Continued Front Panel See pages in the par entheses for details. 1 Disc compartment (13) 2 ST ANDBY/ON button (8) T urns the unit on or off (standby mode). 3 CD/RANDOM button (13, 14) Selects CD mode. Starts or stops random play in CD mode .
– 5 – Remote Control 1 ST ANDBY/ON button 2 CD/RANDOM button 3 TUNER/B AND button 4 REC (Recording) b utton 5 PR OGRAM button 6 REMAIN/RDS MODE button 7 INTR O/RDS SEARCH button 8 TIMER button 9 DISPLA Y MODE button p PRE EQ/HBS button q MUTING button Interrupts and r esumes sound r epr oduction.
– 6 – Continued Getting Started Unpacking After unpacking, check to be sure that you ha ve all the follo wing items. The number in the parentheses follo wing each item name indicates the supplied quantity .
– 7 – 2 Connect the supplied AM loop antenna to the AM LOOP terminal. Place the antenna aw ay from the unit and adjust its position for the best reception. 3 Adjust the position of the FM antenna f or the best r eception. 4 Connect the A C power cord of the unit to the A C outlet after all other connections ha ve been made.
– 8 – Common Operations T urning On or Off the Unit T o turn on the unit Press ST ANDBY/ON on the unit or remote control. The unit turns on with the last source selection remaining v alid. T o turn off the unit (on stanby) Press ST ANDBY/ON on the unit or remote control.
– 9 – Digital Sound Control The unit ’ s digital sound control feature enables you to select desired preset equalizer settings (selectable as sound modes) to enjoy special sound ef fects matching the m usic type. Y ou can also use the HBS (Hyper Bass Sound) system to enjoy po werful bass sound created by emphasizing low frequencies.
– 10 – T uning In a Station 1 When the unit is tur ned on, press TUNER/B AND to select tuner mode. The unit tunes in the last station tuned in (either FM or MW). 2 Pr ess TUNER/B AND to select the band, FM or MW . Each time you press the button, the band selection alternates between FM and MW .
– 11 – T uning In a Preset Station 1 Pr ess TUNER/B AND to select tuner mode. 2 Pr ess TUNER/B AND to select the band, FM or MW . 3 Pr ess PRESET ∞ or 5 (or PRE UP or REPEA T/PRE DO WN on the remote contr ol) to select the desir ed preset number .
– 12 – Receiving FM Stations with RDS RDS (Radio Data System) allo ws FM stations to send an additional signal along with their regular pr ogram signals. For e xample, the stations send their station names, as well as information about what type of program the y broadcast, such as sports or music, etc.
– 13 – Playing Back CDs This unit can play back audio CDs. Loading a Disc 1 Pr ess CD/RANDOM to select CD mode. 2 Pr ess 0 OPEN/CLOSE. The disc tray slides out. 3 Load a disc with the label side facing up. 4 Pr ess 0 OPEN/CLOSE to close the disc compartment.
– 14 – Random Play Y ou can play all the tracks in random order . Press CD/RANDOM bef ore or during playing. The RANDOM indicator lights up. T o exit random play mode, press CD/RANDOM again. The RANDOM indicator goes of f. • Acti vating the REPEA T ONE function during random play mode disables the random play mode.
– 15 – Playing Back T apes • Use only type I normal tapes. The use of tapes longer than 120 minutes is not recommended, since characteristic deterioration may occur and these tapes easily jam in the pinchroller and the capstan. Loading a T ape 1 Pr ess 0 EJECT to open the tape deck door .
– 16 – Recording Recording T apes 1 Load a recordab le tape into the tape deck. Insert a tape with the open side do wn and the side to be recorded facing out from the unit. 2 Press CD/RANDOM or TUNER/B AND to select the desir ed recording sour ce.
– 17 – Using the T imers There are three timers a vailable – daily timer , recording timer and sleep timer . Before using the timers, you need to set the built-in cloc k. (See page 8.) Using Daily Timer W ith the daily timer , you can wake to your fa vorite music or radio program.
– 18 – Using Sleep Timer W ith the sleep timer, y ou can fall asleep to music. Y ou can set the sleep timer using the remote control when the unit is turned on. How the sleep timer actually works The unit automatically turns of f after the specified time length passes.
– 19 – NEWS: News. AFF AIRS: T opical pr ogram e xpanding or enlarging upon the ne ws – debate, or analysis. INFO: Program the purpose of which is to impart advice in the widest sense. SPOR T : Pro gram concerned with any aspect of sports. EDUCA TE: Educational programs.
– 20 – Maintenance T o get the best perfor mance of the unit, keep your discs, tapes, and mechanism c lean. Cassette decks If the heads, capstan, and pinch roller of the cassette deck become dirty.
0202NNMMACORI EN Specifications Amplifier section Output power 24 W (12 W + 12 W) at 8 Ω (MAX.) 20 W (10 W + 10 W) at 8 Ω (10% THD) Audio output lev el PHONES: 800 mV/32 Ω Speakers/Impedance 8 Ω - 16 Ω T uner FM tuning range 87.50 MHz - 108.
An important point after buying a device JVC UX-M3R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC UX-M3R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC UX-M3R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC UX-M3R you will learn all the available features of the product, as well as information on its operation. The information that you get JVC UX-M3R will certainly help you make a decision on the purchase.
If you already are a holder of JVC UX-M3R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC UX-M3R.
However, one of the most important roles played by the user manual is to help in solving problems with JVC UX-M3R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC UX-M3R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
