Instruction/ maintenance manual of the product TK-C1460B JVC
Go to page of 42
E-1 TK-C1460B INSTR UCTIONS COLOUR VIDEO CAMERA L WT0066 BF LOOK COLOR VIDEO CAMERA DIGITAL This instruction manual is made from 100% recycled paper . is a registered trademark owned b y VICT OR COMP ANY OF JAP AN, L TD . is a registered trademark in Japan, the U .
E-2 IMPORT ANT SAFEGU ARDS PORTABLE CART WARNING (symbol provided by RETAC) S3125A 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning.
E-4 W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Due to design modifications, data given in this instruction book are subject to possib le change without prior notice .
E-6 A new DSP (Digital Signal Processor) features a Extended Dynamic Range (ExDR) and enables to shoot both bright and dark locations. The use of a new CCD with a SENSE UP (X32) function realized the minim um luminous flux density f or subject of 0.
E-8 INTR ODUCTION 1 Lens mount To attach the lens . This is applicable to both C-mount lenses and CS-mount lenses. 2 Back f ocus adjustment ring Adjusting the back f ocus during lens installation. When readjustment is required, loosen the locking screw 3 by turning it counterclockwise and turn the back focus adjustment ring 2 .
E-10 INTR ODUCTION 13 [ , , , ] Up-and-down, left-and- right Button These buttons select items on the menu screen and change a set value. ( P age 23) 14 [EXT .TERM-ON/OFF] T erminal On/Off Switch of External Sync hr onization Signal This is a terminating ON/OFF switch for the external synchronization input signal.
E-12 REC PLAY FF REW REVERSE PAUSE/ STILL REC CHECK STOP/EJECT COUNT/ CLOCK TIME MODE TIMER REC AL/PL RESET MENU VIDEO CASSETTE RECORDER SHIFT/TRACKING SET/V.
E-14 CONNECTION/INST ALLA TION SET MENU CAMERA SETUP EXT TERM-OFF INT/GL DUPLEX RX TERM-OFF IOT USED ON LL SIMPLEX ON VIDEO DC ALC LEVEL Av Pk L H DC12V AC24V CLASS 2 ONLY(U TYPE) ISOLATED PO WER ONLY.
E-16 DC12V AC24V CLASS 2 ONL Y(U TYPE) ISOLATED PO WER ONLY (E TYPE) TX + TX - RX + RX - AUX Y/C OUT SYNC IN POWER VIDEO OUT GND A B CD SEE INST - R UCTION MANUAL 1 + - 2 Connect the DC 12 V or the AC 24 V power supply to the DC 12V/AC 24V terminals.
E-18 DC12V AC24V CLASS 2 ONLY(U TYPE) ISOLATED POWER ONLY (E TYPE) T X + TX - R X + R X - A U X Y/C OUT SYNC IN POWER VIDEO OUT G N D A B CD S E E IN S T - R U C T IO N M A N U A L + - 1 2 2mm 6mm M3 x 6mm MAX.
E-20 CONNECTION/INST ALLA TION Lens adjustment ALC LEVEL Av Pk L H Connect the camera according to the connection method, turn it on, display an image on the monitor , and check the image. The camera has been factory-adjusted to the best position, b ut it may need to be adjusted according to the object conditions or combination of lenses.
E-22 CONNECTION/INST ALLA TION A uto white balance control adjustment Each light source has its own colour temper ature. Theref ore, when the main light source lighting an object is changed, the white balance should be adjusted again by pressing the A WC button.
E-24 MENU SETTING The flow of men u screen P age 26 P age 31 P age 34 P age 37 P age 39 MEN U SY NC A D J U S T VID E O A D J U S T MOD E E SL E C T ALC SET T I N G S COM M U N I C.
E-26 Item Functions and set v alues Initial value V PHASE H PHASE SC COARSE SC FINE This adjusts the vertical synchronization to those of other cameras when a selector switch f or the synchronizing system on the side is at LL. (50Hz power region only .
E-28 1/100000 NORMAL 1/4000 20dB OFF OFF ALC SETTINGS Screen (Continued) MENU SETTING Item Functions and set v alues Initial value F AST LIMIT ExDR LEVEL M.ExDR SPEED A GC MODE LOLUX MODE SENSE UP This sets the fastest v alue of a shutter speed when A UTO is set.
E-30 ALC SETTINGS Screen (Continued) MENU SETTING Item Functions and set v alues Initial value B&W COLOUR MODE .. B&W LEVEL This function sets the colour modes to colour or B&W . When s witching the mode betw een “colour’ ’ and “B&W” is carried out, the focus may be dislocated.
E-32 MODE SELECT Screen Titles, image re version, etc., are set. Item Functions and set v alues Initial value CAMERA TITLE EDIT REVERSE MODE HLI MODE ALM.TITLE SIZE ALARM COLOUR – OFF OFF DOUBLE WHITE ALAR M AL A R M NORMAL DOUBLE Bring up the CAMERA TITLE, EDIT screen.
E-34 MENU SETTING MO TION DETECT Screen Item Functions and set v alues Initial value MODE Settings are ex ecuted about the motion detecting function that emits alar m signals when there exists an y motion in the image . Alar m signals are output from the auxiliar y terminals on the back.
E-36 BLC EDITTING Screen MENU SETTING It is possible to set freely the light meter ing area f or backlight compensation. The 2 screens of EDIT1 and EDIT2 can be set.
E-38 1. Select the item CAMERA TITLE on the MODE SELECT screen, and push the SET button. Then, the CAMERA TITLE screen is brought up . 2. Select the first character from the character area using b uttons. The selected char acter is displa yed flashing on and off .
E-40 MOD E S E L E C T CAM ERA T I T L E ED I T . . REV ERSE MO DE OF F AL M . T I T LE S Z E ID O UBLE AL AR M COLO UR WH I TE A UX TERMINAL (B&W IN) D. ZOOM MAX x 2 HLI MODE OFF Output of Blac k-White/Color switc hing signal It is possible to output b lack-white/color s witching signal from the A UX terminal on the back of this unit.
E-42 White spot compensation CCDs have the general characteristic that white spots appear on the screen when the CCD is operated at high temperatures or when they are used with a slow shutter speed. This unit has a built-in white spot compensation function to reduce these white spots.
VICTOR COMPANY OF JAPAN, LIMITED BTK-C1480B, TK-C1481B COLOUR VIDEO CAMERA is a registered trademark owned b y VICT OR COMP ANY OF JAP AN, L TD . is a registered trademark in Japan, the U .
E-2 IMPORT ANT SAFEGU ARDS PORTABLE CART WARNING (symbol provided by RETAC) S3125A 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning.
E-4 W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Due to design modifications, data given in this instruction book are subject to possib le change without prior notice .
E-6 A new DSP (Digital Signal Processor) features a Extended Dynamic Range (ExDR) and enables to shoot both bright and dark locations. The use of a new CCD with a SENSE UP (X32) function realized the minim um luminous flux density f or subject of 0.
E-8 INTR ODUCTION 1 Lens mount To attach the lens . This is applicable to both C-mount lenses and CS-mount lenses. 2 Backf ocus adjustment ring Adjusting the back f ocus during lens installation. When readjustment is required, loosen the locking screw 3 by turning it counterclockwise and turn the back focus adjustment ring 2 .
E-10 INTR ODUCTION 13 [ , , , ] Up-and-down, left-and- right Button These buttons select items on the menu screen and change a set value. ( P age 23) 14 [EXT .TERM-ON/OFF] T erminal On/Off Switch of External Sync hr onization Signal This is a terminating ON/OFF switch for the external synchronization input signal.
E-12 REC PLAY FF REW REVERSE PAUSE/ STILL REC CHECK STOP/EJECT COUNT/ CLOCK TIME MODE TIMER REC AL/PL RESET MENU VIDEO CASSETTE RECORDER SHIFT/TRACKING SET/V.
E-14 CONNECTION/INST ALLA TION SET MENU CAMERA SETUP EXT TERM-OFF INT/GL DUPLEX RX TERM-OFF IOT USED ON LL SIMPLEX ON VIDEO DC ALC LEVEL Av Pk L H DC12V AC24V CLASS 2 ONLY(U TYPE) ISOLATED PO WER ONLY.
E-16 CONNECTION/INST ALLA TION Installing the ferrite core To retain electromagnetic compatibility , use the f err ite cores provided when connecting to the lens. VIDEO DC IRIS ALC LEVEL Av Pk L H Notes: Install the ferrite cores within 50 mm of the camera-side connectors.
E-18 DC12V AC24V CLASS 2 ONLY(U TYPE) ISOLATED POWER ONLY (E TYPE) T X + TX - R X + R X - A U X Y/C OUT SYNC IN POWER VIDEO OUT G N D A B CD S E E IN S T - R U C T IO N M A N U A L + - 1 2 2mm 6mm M3 x 6mm MAX.
E-20 CONNECTION/INST ALLA TION Lens adjustment ALC LEVEL Av Pk L H Connect the camera according to the connection method, turn it on, display an image on the monitor , and check the image. The camera has been factory-adjusted to the best position, b ut it may need to be adjusted according to the object conditions or combination of lenses.
E-22 CONNECTION/INST ALLA TION A uto white balance control adjustment Each light source has its own colour temper ature. Theref ore, when the main light source lighting an object is changed, the white balance should be adjusted again by pressing the A WC button.
E-24 MEN U SY NC A D J U S T VID E O A D J U S T MOD E E SL E C T ALC SET T I N G S COM M U N I CAT I ON MA I N T E N N AC E MOT I ON D E TE C T SYNC D AJ U S T VP H A S E 0 HP H A S E 0 SC E COARS 0 .
E-26 Item Functions and set v alues Initial value V PHASE H PHASE SC COARSE SC FINE This adjusts the vertical synchronization to those of other cameras when a selector switch f or the synchronizing system on the side is at LL. (50Hz power region only .
E-28 ALC SETTINGS Screen (Continued) MENU SETTING 1/100000 NORMAL 1/4000 20dB OFF OFF Item Functions and set v alues Initial value F AST LIMIT ExDR LEVEL M.ExDR SPEED A GC MODE LOLUX MODE SENSE UP This sets the fastest v alue of a shutter speed when A UTO is set.
E-30 Item Functions and set v alues Initial value WHITE BALANCE COLOUR LEVEL ENHANCE LEVEL PEDEST AL LEVEL AU TO BLA CK CTL Selects the white balance adjustment function. The white balance can be adjusted manually or automatically f or light within the colour temperature range of 2500K to 8000K.
E-32 Item Functions and set v alues Initial value MODE LEVEL AREA EDIT ALARM TIME DEMONSTRA TION OFF NORMAL – 10s – MENU SETTING MO TION DETECT Screen This sets ON/OFF of motion detecting function. OFF: Motion detecting function does not work. ON: Motion detecting function works.
E-34 BLC EDITTING Screen MENU SETTING It is possible to set freely the light meter ing area f or backlight compensation. The 2 screens of EDIT1 and EDIT2 can be set.
E-36 1. Select the item CAMERA TITLE on the MODE SELECT screen, and push the SET button. Then, the CAMERA TITLE screen is brought up . 2. Select the first character from the character area using b uttons. The selected char acter is displa yed flashing on and off .
E-38 White spot compensation CCDs have the general characteristic that white spots appear on the screen when the CCD is operated at high temperatures or when they are used with a slow shutter speed. This unit has a built-in white spot compensation function to reduce these white spots.
An important point after buying a device JVC TK-C1460B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC TK-C1460B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC TK-C1460B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC TK-C1460B you will learn all the available features of the product, as well as information on its operation. The information that you get JVC TK-C1460B will certainly help you make a decision on the purchase.
If you already are a holder of JVC TK-C1460B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC TK-C1460B.
However, one of the most important roles played by the user manual is to help in solving problems with JVC TK-C1460B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC TK-C1460B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
