Instruction/ maintenance manual of the product TH-S11E JVC
Go to page of 43
GVT0155-001A [B] D VD DIGIT AL CINEMA SYSTEM INSTRUCTIONS Consists of XV -THS33 , SP-WS33, SP-THS33F, SP-THS33C and SP-THS33S Consists of XV -THS11, SP-WS11, SP-THS11F, SP-THS11C and SP-THS11S THS33-11[B]-01cov1.
G-1 W arnings, Cautions and Others IMPORTANT for the U.K. DO NO T cut of f the mains plug from this equipment. If the plug fitted is not suitable for the po wer points in yo ur home or the cable is too short to reac h a power point, then obtain an appropriate safety approv ed e x tension lead or consult your dealer .
G-2 Caution: Proper Ventilation T o av oid risk of electric shock and fire and to protect from damage, place the apparatus on a level surface. The minimal cleara nces are shown belo w: SAFETY INSTRUCT.
1 T able of contents Introduction ............. .............. .......... 2 Notes on handling ............. ............... .............. .............. .........2 Supplied accessories ........ ........................................... .........2 About discs .
2 Introduction 7 Important cautions Installation of the system • Select a plac e which is le vel, dr y and neither too hot nor too cold; between 5°C and 35°C. • Leav e suff icient distance be tween the system and t he TV . • Do not use the system in a place su bject to vibration.
3 About discs This system has been designed to play back the following d iscs: D VD V IDEO, V ideo CD (VCD), Super V ideo CD (SVCD), Audio CD (CD), CD-R and CD-R W . • This system accommodates the P A L system, and also can play discs recorded with NTSC system.
About discs 4 For all playable files • The system can only recognize and play f iles with one of the following e xtensions, which can be in any combination of upper and lo wer case; MP3: “.MP3”, “.mp3” JPEG: “.JPG”, “.JP EG”, “.jpg”, “.
5 Index of parts and controls The numbers in the figures indicate the pages where the details of th e parts are described. Front panel (center unit) Rear panel (center unit) WMA P L PCM SURR CH FM AM PROGRESSIVE B.
Index of parts and controls 6 Remote control Putting batteries in the remote control If the range or effecti ven ess of the remote control decre ases, replace both batteries. CAUTION • Do not expose batteries to heat or flame. Operating the system from the remote control Aim the remote contro l directly to the front panel of the center unit.
7 Connections 7 AM (MW) loop antenna Setting up su pplied AM (MW) lo op antenna Connecting AM ( MW) loop antenna • T urn the loop antenna un til you ha ve the best reception during AM (MW) broadcast program reception. NOTE • Make sure the antenna conductors do not touch any other terminals, connecting cords and power cords.
Connections 8 7 Assembling the front speakers for TH-S33 Before assembling — Prepare a Phillips screwdri ver (not supplied). • T ake care not to drop any component part while assembling; otherwise, it may ca use damage to the floor or injury .
9 7 Connecting speakers for T H-S33 • When you connect speakers other than the supplied ones, use speakers of the same speaker impedance (SPEAKER IMPED ANCE) indicated on the rear of the center unit. • DO NO T connect more than one speaker to one speaker terminal.
10 7 Connecting speakers for T H-S11 CAUTION When you connect speak ers other than the supplied ones, use speakers of the same speaker impedance (SPEAKER IMPED ANCE) indicated on the rear of the center unit. • DO NO T connect more than one speaker to one speaker terminal.
Connections • Place the satellite speakers on a flat and level surface. • The front and center speakers are magnetically shielded to avoid color distortions on TVs. However, if not installed properly, they may cause color distortions. So, pay at tention to the following when installing the speakers.
Operating the TV 7 To operate a JVC’s TV Y ou can use the remote control to op erate not only this unit b ut also JVC’ s TV . • Refer also to the manuals supplied for the TV . • T o operate the TV , aim the remote control directly at the remote sensor on the TV .
13 Basic operations On the remote control: Press STANDBY/ON . On the center unit: Press . When DVD is selected as the source (see page 14), the following messages will appear on the TV screen. NOTE • The STANDBY lamp goes off w hen the power is turned on, and the lamp lights when the power is turned off.
Basic operations 14 On the remote contro l: Press one of the source selecting buttons (DVD/CD 3 , FM/AM or TV SOUND). D VD/CD 3 : T o play back a disc (DVD VIDEO, VCD etc.). (See page 16.) FM/AM : T o tune in an FM or AM (MW) station. (See page 34.) Each time you press the butto n, the band alternates between FM and AM (MW).
Basic operations 15 The system turns off automatica ll y when the specified period of time has passed. Press SLEEP, with SHIFT pressed. Each time you repeat th e procedure, the s hut-off time changes. Example: To check the remaining time Press SLEEP , wit h SHIFT pressed once.
16 Playback • The mark shows the types of discs the operation is available for . 1 Press 0 on the center unit. • The system turns on and the disc tray comes out. 2 Place a disc. 3 Press DVD/CD 3 (play button). For MP3 The file control display (see page 24) appears on the TV screen.
Playback 17 7 Playback information on the display window DVD VIDEO Example: When a DVD VIDEO encoded with Do lby Digital 5.1ch is played DVD VR disc Example: During playback on the Original program* Example: During playback on the Playlist* * Pressing TOP MENU/PG or MENU/P L , you can change the play mode.
Playback 18 When a DivX file is played. • You can change the time inform ation mode (except for MP3/JPEG/ DivX). (See page 22.) • You can also check the playback in formation on the TV screen. (S ee page 21.) Screen saver A TV screen may burn out if a sta tic picture is displayed for a long time.
Playback 19 7 During playback or while stopped. Press TITLE/GROUP. “_ _” or “_” is shown in the title/group display area in the display window . Example: During DVD VIDEO playback 2 While the display windo w shows “_ _” or “_”, use number bu ttons (0-10, +10) to enter the desir ed title or group number.
20 Advanced operations • The mark shows the types of discs the operation is available for . 7 Auto Surround (AUTO SURR) This function automatically sele cts the appropriate surround mode according to the input signals. Fo r example, a multich annel source is automatically reproduc ed in multichannel audio.
Advanced operations 21 7 All Channel Stereo All Channel S tereo (ALL ST) mode can reprodu ce a lar ger stereo sound fi eld using all the connect ed (and acti v ated) speakers.
Advanced operations 22 7 Contents of the on-screen b ar during playback DVD VIDEO DVD VR disc VCD SVCD CD DivX A Sho ws disc type. B Sho ws audio information. C Sho ws current title number . D Shows current chapter number (for D VD VIDEO and DVD VR) or track number (for other type of discs).
Advanced operations 23 Y ou can start playing a title, chapter or track you specify . Y ou can also play a disc from specif ied time. Locating a desired sc ene from the DVD menu D VD VIDEOs generally hav e their o wn menus which show disc contents and you can di splay them on the TV screen.
Advanced operations 24 Locating a desired po sition by specifying the time Y ou can locate a desi red position by specif ying the time from the beginning the disc (while stopped) or the current title/track (during playback).
25 7 For MP3: During playback or while stopped For JPEG/DivX: While stopped Press Cursor 3 / 2 / Y / 5 to select the desired group/track/file. • For MP3, playback starts from the selected track. • For JPEG, proceed to perfo rm the follow ing operation.
26 7 During playback of a disc containing subtitles in several languages When using the SUBTITLE button: 1 Press SUBTITLE. Example (DVD VIDEO): “ENGLISH” is selected out of 3 subtitle languages recorded. 2 Press Cursor Y / 5 to select the desired subtitle.
27 Frame-by-frame playback During playback 8 repeatedly. Each time you press th e button, the still picture advances b y one frame. To return to normal playback Press D VD/CD 3 . Playing back in slow-motion 7 During playback 1 Press 8 at the point where you want to start playback in slow-motion from.
Advanced operations 28 4 ENTER. Example: 5 Press Cursor Y / 5 to change the setting. 6 Press ENTER. The current VFP settings appe ar again. 7 Repeat steps 3 to 6 to adjust other parameters. 8 Press VFP. NOTE • Although the setting display di sappears in the middle o f the procedure, the setting at that time will be stored.
29 Repeating the cu rrent selection 7 For DVD VIDEO/DVD VR: During playback For VCD/SVCD: During playback without PBC function or stopped For CD/MP3/JPEG/DivX: During playback or stopped When using the REPEA T button: Press REPEAT, wit h SHIFT pressed.
When using the on-screen bar: 1 ON SCREEN twice. 2 Press Cursor / 2 to highlight . Press ENTER. 4 Press Cursor Y / 5 repeatedly to select “A-B”. 5 Press ENTER at t he beginning of the part you want to repeat (point A). 6 Press ENTER at the end of the part you want to repeat (point B).
31 Setting DVD preferences • Y ou can change the language us ed in the setup menus. See “Menu description”. Basic operation on the setup menus 7 While sto pped 1 Press SET UP, with SHIFT pressed. 2 Follow the instructions that appear on the TV screen.
Setting DVD preferences 32 : P icture menu (PICTURE) 7 MONITOR TYPE Y ou can select the monitor type to match your TV when yo u play D VDs recorded in the picture’ s height/width ratio of 16:9. • 16:9 (Wide television con versio n) Select this when th e aspect ratio of your TV is 16:9 (wide TV).
Setting DVD preferences 33 7 Delay menu (DEL A Y) Example: In this case, set the delay ti me of each speaker as follows; • Delay time of front speak ers: 0 ms • Delay time of cente r speaker: 1 ms.
34 T uner operations 1 Press FM/AM repeatedly to select the band. Example: When the system is tuned in to 810 kHz. 2 Press TUNING 9 / ( repeatedly until you find the frequency you want.
Tuner operations 35 When the stereo FM program currently tuned in is noisy , you can change the FM reception mode to impro ve the reception. 7 While listening to an FM station Press FM MODE. The FM reception mode appears on the display windo w . Each time you press the button, th e FM reception mode changes.
T uner operations 36 Searching for a program by PTY codes One of the adva ntages of the RDS service is that you can locate a particular kind of program from the preset channels (see page 34) by specifying the PTY codes.
Tuner operations 37 Switching to broadcas t program of your choice temporarily Another con venient RDS servic e is call ed “Enhanced Other Network”.
38 References 7 Handling Discs • Remov e the disc from its case by holding it at the edge while pressing the center hole lightly . • Do not touch the shiny surface o f the disc or bend the disc. • Put the disc back in its case after use to prev ent warping.
References 39 7 Center unit (XV-THS33/XV-THS11) Audio section Front/Center/Surround: 33 W per channel, RMS at 6 C at 1 kHz, with 10 % total harmonic distortion.
EN 0105TMMMD WJEM © 2005 Victor Company of Japan, Limited TH-S33/TH-S11 D VD DIGI T AL CINEMA SYSTEM THS33-11[B]-09cov4.f m Page xliv Monday, February 14, 2005 3 :02 PM.
An important point after buying a device JVC TH-S11E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC TH-S11E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC TH-S11E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC TH-S11E you will learn all the available features of the product, as well as information on its operation. The information that you get JVC TH-S11E will certainly help you make a decision on the purchase.
If you already are a holder of JVC TH-S11E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC TH-S11E.
However, one of the most important roles played by the user manual is to help in solving problems with JVC TH-S11E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC TH-S11E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
