Instruction/ maintenance manual of the product SX-XD33 JVC
Go to page of 10
LVT0953-002A [J, C] Home Cinema DD Speaker System Système d’enceinte Home cinéma DD SX-XD33 Consists of SX-XDS33 and SX-XDC33 Se compose de SX-XDS33 et SX-XDC33 INSTRUCTIONS MANUEL D ’ INSTRUCTIONS For Customer Use: Enter below the Model No . and Serial No.
– 1 – Contents W arnings, Cautions and Others .............................................................. 2 Assembly ................................................................................................. 3 Additional information ....
– 2 – English Checking the supplied Accessories Check to be sure you have the following supplied accessories. The number in parenthesis indicates the quantity of the piece supplied. • Speaker cords Appro x. 6 m (19.7 feet) (3: for satellite speaker s placed in front position and a center speaker) Appro x.
– 3 – English Assembling the satellite speakers Each speaker (except the center speaker) has been divided into three parts for shipment. Before using this speaker system, assemble it first by following the procedure below . • Prepare a Phillips screw driver .
– 4 – English 3) Insert the speaker cord into the speaker terminal inside the leg. 1 Press and hold the clamp. 2 Insert the exposed core of the speaker cord full y into the terminal. • Connect the cord with the b lack stripe to the · terminal. 3 Release y our fing er .
– 5 – English Joining the leg and the speaker unit 6 Insert the speaker cord into the speaker terminal inside the leg. 1 Press and hold the clamp. 2 Insert the exposed core of the speaker cord full y into the terminal. • Connect the cord with blac k stripe to the · terminal.
– 6 – English Connecting the Center speaker • T o connect the center speaker , use the same type of speaker cord (6 m (19.7 feet); tagged with “ FRONT SPEAKER ” ) as used for connecting the front speakers. • Each speaker cord has its name tag attached to one end.
– 7 – English General layout of speakers Place all speakers at the same distance from the listening position if possible. • Usually place the center speaker close to the TV . • When you place the center speaker on a TV , make sure the surface is level and stable.
EN, FR 0303NSMMDWHCE © 2003 VICTOR COMPANY OF JAPAN, LIMITED VICTOR COMPANY OF JAPAN, LIMITED SX-XD33 Home Chinema DD Speaker System.
CAUTIONS / A TTENTION For Unpacking and Assembling Pour le démontage et le montage T o prevent the deformation of the speaker grille, do not hold the speaker grille strongly . Pour éviter la déformation des grilles d’enceinte, ne tenez pas la grille trop fortement.
An important point after buying a device JVC SX-XD33 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC SX-XD33 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC SX-XD33 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC SX-XD33 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC SX-XD33 will certainly help you make a decision on the purchase.
If you already are a holder of JVC SX-XD33, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC SX-XD33.
However, one of the most important roles played by the user manual is to help in solving problems with JVC SX-XD33. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC SX-XD33 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
