Instruction/ maintenance manual of the product SP-DWF10 JVC
Go to page of 20
COMP A CT COMPONENT SYSTEM SP-DWF10 LVT1145-010A [J] POWERED SUBWOOFER INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference.
– 2 – Precautions for installation • T o prevent deformation or discoloration of the cabinet, do not install the unit where it is exposed to direct sunlight or high humidity , and avoid installation near air conditioning outlets. • Speaker vibrations may cause howling.
– 3 – Operating the Unit Automatically According to the Incoming Signals — AUTO POWER ON/ST ANDBY T o activate A UT O PO WER ON/ST ANDBY . Press the AUT O POWER ON/ST ANDBY switch to the [ ] ON position. • If no sound comes in for 5-10 minutes, the unit enters standby mode.
– 4 – Additional Information Speaker layout T o obtain the best possible sound from your unit: —Place a subwoofer wherever you like since bass sound is non- directional. Normally place it in front of you. —Place all the main speakers at the same distance from the listening position.
– 5 – THIS LIMITED W ARRANTY IS V ALID ONL Y IN THE FIFTY (50) UNITED ST A TES, THE DISTRICT OF COLUMBIA AND IN COMMONWEAL TH OF PUERTO RICO. WHA T WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner .
0104NSMCREJSC EN ©2004 VICTOR COMP ANY OF JAP AN, LIMITED BT -51001-5 (0301) QUALITY SER VICE HOW TO LOCA TE YOUR JVC SER VICE CENTER Dear Customer , In order to receive the most satisfaction from your purchase,please read the instruction booklet before operating the unit.
COMP ACT COMPONENT SYSTEM SP-DWF10 POWERED SUBWOOFER INSTRUCTIONS LVT1145-007A [A] SP-PWE5 SP-DWF10_EN.pm65 2/20/04, 9:08 AM 1.
– 2 – Precautions for installation • T o prevent deformation or discoloration of the cabinet, do not install the unit where it is exposed to direct sunlight or high humidity , and avoid installation near air conditioning outlets. • Speaker vibrations may cause howling.
– 3 – Connections Before connecting this unit to the amplifier (or receiver), observe the following carefully . • T urn off the amplifier . • Make all connections before plugging in this unit. • DO NOT connect this unit to the REC OUT jacks of your amplifier .
EN ©2004 VICTOR COMPANY OF JAPAN LIMITED 0304NSMCREJSC Additional Information Speaker layout T o obtain the best possible sound from your unit: —Place a subwoofer wherever you like since bass sound is non- directional. Normally place it in front of you.
COMP ACT COMPONENT SYSTEM SP-DWF10 LVT1145-004A [US/UJ] POWERED SUBWOOFER SUBWOOFER MOTRIZ SUBWOOFER AUTO-ALIMENT ADO INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUAL DE INSTRUÇÕES SP-DWF10_Cover1.
– 2 – ESP AÑOL ENGLISH Front view Vista delantera Side view Vista lateral Front Parte delantera Thank you for purchasing a JVC speaker . Before you begin using it, please read the instructions carefully to be sure you get the best possible performance.
– 3 – ESP A Ñ OL ENGLISH Precautions for Daily Use • T o maintain the appearance of the unit Wipe with a dry , soft cloth if the cabinet or control panel should become dirty . If very dirty , apply a small amount of water or neutral detergent to the cloth and wipe clean.
– 6 – ESP A Ñ OL ENGLISH English/Espa ñ ol Connections Before connecting this unit to the amplifier (or receiver), observe the following carefully . • T urn off the amplifier . • Make all connections before plugging in this unit. Conexiones Antes de conectar esta unidad al amplificador (o receptor), tenga en cuenta los puntos siguientes.
– 7 – ESP A Ñ OL ENGLISH English/Espa ñ ol T urning On the Power — POWER T o turn on the power . Press the POWER switch to the [ ❙ ] ON position. • The power lamp lights in green. T o cut of the power . Press the POWER switch to the [ ‡ ] OFF position.
– 8 – ESP AÑOL ENGLISH English/Español T roubleshooting Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your dealer . Power does not come on. • Is the unit pugged in? – Plug the AC power cord firmly into the AC outlet.
COMP ACT COMPONENT SYSTEM SP-DWF10 LVT1145-005A [UX] POWERED SUBWOOFER INSTRUCTIONS SP-DWF10_Eng.pm65 4/27/04, 9:23 AM 1.
– 2 – Precautions for installation • T o prevent deformation or discoloration of the cabinet, do not install the unit where it is exposed to direct sunlight or high humidity , and avoid installation near air conditioning outlets. • Speaker vibrations may cause howling.
– 3 – English Operating the Unit Automatically According to the Incoming Signals — AUTO POWER ON/ST ANDBY T o activate AUT O POWER ON/ST ANDBY . Press the AUT O POWER ON/ST ANDBY switch to the [ ] ON position. • If no sound comes in for 5-10 minutes, the unit enters standby mode.
English – 4 – Additional Information Speaker layout T o obtain the best possible sound from your unit: — Place a subwoofer wherever you like since bass sound is non- directional. Normally place it in front of you. — Place all the main speakers at the same distance from the listening position.
An important point after buying a device JVC SP-DWF10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC SP-DWF10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC SP-DWF10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC SP-DWF10 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC SP-DWF10 will certainly help you make a decision on the purchase.
If you already are a holder of JVC SP-DWF10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC SP-DWF10.
However, one of the most important roles played by the user manual is to help in solving problems with JVC SP-DWF10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC SP-DWF10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
