Instruction/ maintenance manual of the product RX-7520VBK JVC
Go to page of 46
For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference.
W ar nings, Cautions and Others/ Mises en gar de, précautions et indications diverses WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION To reduce the risk of electrical shocks, fire, etc.
English Fran ç ais For Canada/pour le Canada CAUTION: TO PREVENT ELECTRIC SHOCK, MA TCH A TTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRE.
1 English T able of Contents Par ts Identification ...................................... 2 Getting Star ted ........................................... 3 Before Installation ...................................................................... 3 Checking the Supplied Accessories .
2 English Par ts Identification Front Panel ADJUST RX-7520V AUDIO/VIDEO CONTROL RECEIVER SETTING MASTER VOLUME CONTROL DOWN UP SURROUND MODE PHONES SURROUND ON/OFF FM/AM TUNING STANDBY FM/AM PRESET FM.
3 English Getting Star ted Putting Batteries in the Remote Contr ol Before using the remote control, put two supplied batteries f irst. • When using the remote control, aim the remote control directly at the remote sensor on the unit. 1 On the back of the remote contr ol, remo ve the battery cover .
4 English DIGITAL 1 ( DVD ) DIGITAL 2 ( CD ) FRONT CENTER DVD FM 75 COAXIAL COMPU LINK-4 (SYNCHRO) ANTENNA TV SOUND SUBWOOFER OUT VID EO VIDEO VIDEO S-VIDEO S-VIDEO AU DIO AUDIO OU T (REC) R IGHT LEFT.
5 English Connection diagram FRONT SPEAKERS RIGHT LEFT + 1 – RIGHT LEFT 2 + – FRONT SPEAKERS 1 FRONT SPEAKERS 2 RIGHT LEFT 1 RIGHT LEFT 1 RIGHT LEFT 1 1 2 3 Connecting speakers to the FRONT SPEAKERS 1 terminals For each speak er, connect the (+) and ( – ) terminals on the rear panel to the (+) and ( – ) terminals marked on the speak ers.
6 English Getting Star ted Left rear speaker Right rear speaker CENTER SPEAKER REAR SPEAKERS RIGHT LEFT + – Center speaker Connecting the r ear and center speakers Connect rear speakers to the REAR SPEAKERS terminals and a center speaker to the CENTER SPEAKER terminals.
7 English Cassette deck or CD recorder Cassette deck To audio output To audio input AUDIO TV SOUND VCR OUT (REC) IN (PLAY) TAPE CDR CD OUT (REC) IN (PLAY) RIGHT LEFT CD recorder To audio input To audio output V ideo component connections Use the cables with RCA pin plugs (not supplied).
8 English Getting Star ted TV COMPONENT VIDEO MONITOR OUT VCR DVD Y P B /C B P R /C R VIDEO VCR OUT (REC) IN (PLAY) MONITOR OUT DVD AUDIO REAR RIGHT LEFT FRONT CENTER DVD SUBWOOFER OUT SUB WOOFER RIGH.
9 English DVD DIGIT AL 1 (DVD) DIGIT AL IN DIGIT AL 2 ( CD ) Digital connections This receiv er is equipped with two DIGIT AL IN terminals — one digital coaxial terminal and one digital optical terminal. Y ou can connect an y digital component to one of the digital terminals using a digital coaxial cable (not supplied).
10 English Fr ont Panel T urning On the Power Press ST ANDBY/ON (or ST ANDBY/ON A UDIO on the remote control). The ST ANDBY lamp goes off. The name of the current source (or station frequency) appears on the display . T o turn off the power (into standby mode) Press ST ANDBY/ON (or ST ANDBY/ON A UDIO on the remote control) again.
11 English Adjusting the V olume On the front panel: T o increase the v olume, turn MASTER V OLUME clockwise. T o decrease the volume , turn it counterclockwise. From the remote control: T o increase the v olume, press V OLUME +. T o decrease the volume , press V OLUME – .
12 English Basic Operations Changing the Display Brightness Y ou can dim the display . Press DIMMER on the remote contr ol . • Each time you press the button, the display dims and brightens alternately . T urning Off the Power with the Sleep T imer Y ou can f all asleep w hile listening to m usic — Sleep Timer .
13 English S.WFR LS RS S LFE R C L LC S.WFR LS RS CH- S LFE SPK PRO LOGIC ΙΙ DIGIT AL AUTO ANALOG DIGIT AL LINEAR PCM 12 R S.WFR LS RS S LFE R C L Signal indicators Speaker indicators Basic adjustme.
14 English Setting the Digital Input [DIGIT AL IN] T erminals When you use the digital input terminals, register what components are connected to which terminals (DIGIT AL IN 1/2) so that the correct source name will appear when you select the digital source.
15 English INPUT INPUT ATT ANALOG / DIGITAL On the front panel From the remote control 2 Press INPUT ANALOG/DIGIT AL (or AN ALOG/DIGIT AL on the r emote control) to select the digital input mode.
16 English Selecting the V ideo Input T erminal This receiv er is equipped with the component video input terminals for the D VD player which giv e you higher picture quality . When you use the component video input terminals for the D VD player , change the video input terminal setting.
17 English Speaker size Register the sizes of all the connected speakers. • When you change your speakers, register the inf ormation about the speakers again. 1 Press SETTING r epeatedly until “ FRNT SP (Front Speak er), ” “ CNTR SP (Center Speaker) ” or “ REAR SP (Rear Speak er) ” (with the current setting)* appears on the display .
18 English 2 Press CONTR OL UP 5 /DO WN ∞ to select the low fr equency effect attenuator lev el. • Each time you press the button, the setting alternates between “ 0dB ” and “– 10dB. ” 0dB : Normally select this. – 10dB : Select this when the bass sound is distorted.
19 English Adjusting the Front Speakers Output Balance If the sounds you hear from the front right and left speakers are unequal, you can adjust the speakers output balance. Bef ore you start, r emember .... There is a time limit in doing the follo wing steps.
20 English Adjusting the Subwoofer Output Level Y ou can adjust the subwoofer output le vel if you ha ve connected a subwoofer and set the subw oofer infor mation correctly —“ YES. ” On the front panel: Bef ore you start, r emember .... There is a time limit in doing the following ste ps.
21 English T uning in Stations Manually 1 Press FM or AM (FM/AM). The last recei ved station of the selected band is tuned in. • Each time you press the button on the remote control (FM/ AM), the band alternates between FM and AM. 2 Press FM/AM TUNING 5 / ∞ repeatedly until y ou f ind the frequency y ou want.
22 English Selecting the FM Reception Mode When an FM stereo broadcast is hard to receiv e or noisy , you can change the FM reception mode while receiving an FM broadcast. • Y ou can store the FM reception mode for each preset station. (See page 21).
23 English Cr eating Realistic Sound Fields ** Manuf actured under license from Digital Theater Systems, Inc. US P A T . No . 5,451,942 and other world-wide patents issued and pending. “ DTS ” and “ DTS Digital Surround ” are trademarks of Digital Theater Systems, Inc.
24 English Cr eating Realistic Sound Fields ■ All Channel Stereo This mode can reproduce a larger stereo sound f ield using all the connected (and acti vated) speakers. All Channel Ster eo can be used w hen the fr ont and rear speakers ar e connected to this receiver without r espect to the center speaker connection.
25 English About Relations between Speaker Layouts and Surr ound Modes A v ailable Surround modes will vary depending on ho w many speakers are used with this recei ver . Make sur e tha t y ou hav e set the speaker information corr ectly (see pages 16 to 18).
26 English Befor e you start, r emember .... • Make sur e that you hav e set the speaker information corr ectly (see pages 16 to 18). • Y ou cannot adjust the center speaker output lev el when you have set “ CNTR SP ” to “ NONE. ” • Y ou cannot adjust the rear speaker output lev els when you have set “ REAR SP ” to “ NONE.
27 English On the front panel: Y ou can also use the buttons on the front panel to adjust the Surround modes. Ho wever , no test tone is a vailable when using the b uttons on the fr ont panel. So mak e adjustments while listening to the sound of the source played back.
28 English Cr eating Realistic Sound Fields When y ou select “ PL II MUSIC, ” you can go to the follo wing adjustment. 4 T ur n Panorama control on or off . 1) Press ADJUST repeatedly until “ P ANORAMA ” (with the current setting)* appears on the display .
29 English On the front panel: 1 Start playing 2 channel softwar e — either analog or Linear PCM — and select the source. 2 Press SURR OUND ON/OFF to activate Sur round mode. When Surround mode turns on, the last selected Surround mode will be activ ated.
30 English This receiv er provides the D VD MUL TI playback mode for reproducing the analog discrete output mode of the D VD player . Before playing back a D VD, refer also to the manual supplied with the D VD player .
31 English COMPU LINK Remote Contr ol System Automatic Power On/Off (Standby): only possible with the COMPU LINK-3 and COMPU LINK-4 Both the CD player and cassette deck (or CD recorder) turn on and of f (standby) along with the receiver .
32 English The A V COMPU LINK remote control system allows you to operate JVC ’ s video components (TV , VCR, and D VD player) through the receiv er . This receiv er is equipped with the A V COMPU LINK-III, which added a function to operate JVC ’ s video components through the video components terminals.
33 English One-T ouch DVD Play Simply by starting playback on the D VD player , you can enjoy the D VD playback without setting other switches manually .
34 English Operating JVC ’ s Audio/V ideo Components Y ou can use the remote contr ol to operate other JVC ’ s components. Operating Audio Components FM MODE PTY – PTY SEARCH – PTY IMPORT ANT .
35 English Cassette deck After pressing T APE/CDR, you can use the following b uttons f or cassette deck operations: 3 3 3 3 3 : Start playback. FF : Fast wind a tape from left to right. REW : Fast wind a tape from right to left. 7 7 7 7 7 : Stop playback or recording.
36 English Operating V ideo Components IMPORT ANT : T o operate JVC ’ s video components using this remote control: • Y ou need to connect JVC ’ s video components through the A V COMPU LINK terminals (see page 32) in addition to the connections using cables with RCA pin plugs (see pages 7 and 8).
37 English Operating Other Manufactur ers ’ V ideo Equipment By changing the transmittable signals, y ou can use the remote control supplied f or this unit to operate other manufacturers ’ equipment. • Refer also to the manuals supplied for the other products.
38 English T o change the transmittable signals for operating a VCR 1 Press and hold ST ANDBY/ON VCR. 2 Press VCR. 3 Enter manufactur er ’ s codes using b uttons 1 – 9, and 0. 4 Release ST ANDBY/ON VCR. No w , you can perform the following operations on the VCR.
39 English Manufacturer Codes JVC 01 * Panasonic 02 Philips 04 Pioneer 03 Sony 05 Toshiba 06 Yamaha 07 Manufacturers ’ codes for D VD play er * “ 01 ” is the initial setting. Manufactur ers ’ codes are subject to change without notice. If they are changed, this r emote control cannot opera te the equipment.
40 English T r oubleshooting Use this chart to help you solve dail y operational problems. If there is any problem you cannot solve, contact your JVC ’ s service center . SOLUTION Plug the power cord into an AC outlet. Check speaker wiring and reconnect if necessary.
41 English Specifications Designs & specif ications are subject to change without notice. Amplifier Output Po wer At Stereo operation: Front channels: 100 W per channel, min. RMS, dri ven into 8 Ω , 40 Hz to 20 kHz with no more than 0.8% total harmonic distortion.
42 English FM tuner (IHF) T uning Range: 87.5 MHz to 108.0 MHz Usable Sensiti vity: Monaural: 12.8 dBf (1.2 µV/75 Ω ) 50 dB Quieting Sensiti vity: Monaural: 21.
VICTOR COMP ANY OF JAP AN, L IMITED EN, FR 0202NHMMDWJEIN J V C RX-7520VBK[C]Cover.pm5 02.2.14, 4:30 PM 2.
An important point after buying a device JVC RX-7520VBK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC RX-7520VBK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC RX-7520VBK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC RX-7520VBK you will learn all the available features of the product, as well as information on its operation. The information that you get JVC RX-7520VBK will certainly help you make a decision on the purchase.
If you already are a holder of JVC RX-7520VBK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC RX-7520VBK.
However, one of the most important roles played by the user manual is to help in solving problems with JVC RX-7520VBK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC RX-7520VBK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
