Instruction/ maintenance manual of the product MC-R421U JVC
Go to page of 9
ENGLISH DEUTSCH FRANÇAIS MC-R421U LST0033-001A INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located at the top of the unit. Retain this information for future reference. Model No. MC-R421U Serial No. This instruction book is made from 100% recycled paper .
2 Thank you f or purchasing the JVC MC-R421U D VD-R DRIVE. Before you start operating this unit, please read the instructions carefully in order to obtain the best possible performance. 1. D ANGER: Invisib le laser radiation will occur when the unit is open with a f ailed or def ective interlock.
3 ENGLISH Drive loc king screw (M3 with w asher) ............................................................................ 2 (including one spare) SCSI cable (with a connector cap , 1 m length) ......................................................
4 INST ALLA TION Sensor slit •Beware of damage Drive locking screw Drive storage cover Drive storage section Drive No.4 Drive No.3 Drive No.2 Drive No.1 Screws Screws Drive storage section • Figure shows the MC-8200U Screws Drive No.6 Drive No.5 Drive No.
5 ENGLISH INST ALLA TION 6. How to Connect Cab les to the D VD-R Drive 䡵 Also ref er to the corresponding sections in your Libr ar y Instructions Manual. 1. Connect the power supply cab le, control cable and SCSI cab le to the connectors at the rear of the D VD-R Dr ive .
6 INST ALLA TION 䡵 Set the SCSI ID No . between 0 - 7 using only a ID No . that is not being used by other SCSI de vices. 䡵 Note that the def ault SCSI ID of the Library is 0 and the SCSI card is 7. 䡵 F or the details on def ault f actor y settings, please ref er to the section “ SCSI ID No .
7 ENGLISH 11. Example of a SCSI Cable Connection ● An operational error ma y occur when the total length of the internal and external SCSI cables e xceed 3 meters (with SCSI-2, 10 Mb ytes/sec. sync). When the SCSI bus is used as SCSI-2, 5 Mbytes/sec.
8 SPECIFICA TIONS Interface : SCSI-2 Data transmission rate : Sustained (When the host adapter is set to the maximum sync tr ansfer r ate of 20 Mbytes/sec.) D VD-R for Gener al (Single-sided 4.7 GB or double-sided 9.4 GB , recordable): 3.31 Mbytes/s to 5.
MC-R421U DVD-R DRIVE VICTOR COMPANY OF JAPAN, LIMITED Printed in Japan LST0033-001A © 2001 VICTOR COMPANY OF JAPAN, LIMITED is a registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD. is a registered Trademark in JAPAN, the U.S.A., the U.K. and many other countries.
An important point after buying a device JVC MC-R421U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC MC-R421U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC MC-R421U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC MC-R421U you will learn all the available features of the product, as well as information on its operation. The information that you get JVC MC-R421U will certainly help you make a decision on the purchase.
If you already are a holder of JVC MC-R421U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC MC-R421U.
However, one of the most important roles played by the user manual is to help in solving problems with JVC MC-R421U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC MC-R421U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
