Instruction/ maintenance manual of the product LPT1132-001A JVC
Go to page of 58
INSTR UCTIONS DVD VIDEO RECORDER DR-MH220SE EN LPT1 132-001A.
2 This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
3 Introduction Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-9 Symbol Used in this Manual . . . . . . . . . . . . . . . .4 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .4 Recordable and Playable Discs .
4 Introduction To ensure proper use of this product, please read this owner ’s manual carefully and retain for future reference. This manual provides information on the operation and maintenance of your recorder . Should the unit require service, contact an authorized service location.
5 Introduction Recordable and Playable Discs DVD-RW (Digital V ideo Disc - ReWritable): DVD-RW discs can be formatted for VR mode recording or V ideo mode recording. These Discs can be recorded on repeatedly . Recordings can be erased, then you can record again on the same Disc.
6 Playable Discs DVD (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented V ideo CD (VCD) (8 cm / 12 cm disc) VIDEO CDs or CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format Audio CD (.
7 Introduction About the internal hard disk drive The internal hard disk drive (HDD) is a fragile piece of equipment. Please use the recorder following the guidelines below to protect against possible HDD failure. We recommend that you back up your important recordings onto DVD discs in order to protect against accidental loss.
a ST ANDBY/ON button Switches the recorder ON or OFF . b Display window Shows the current status of the recorder . T/S: Indicates the timeshifting mode. REC: The recorder is recording. HDD: The recorder is HDD mode. DVD: The recorder is DVD mode. HDD bB DVD: The recorder is dubbing.
9 Introduction a ST ANDBY/ON: Switches the recorder ON or OFF . OPEN/CLOSE ( Z ): Opens and closes the disc tray . DVD: Selects the unit’s function mode to DVD. HDD: Selects the unit’s function mode to HDD. AV INPUT : Changes the input to use for recording (T uner , A V1-4, or DV IN).
10 Connecting to the Aerial Remove the aerial cable plug from your TV set and insert it into the aerial socket at the back of the recorder . Plug one end of the aerial cable into the TV socket on the recorder and the other end into the aerial input socket on your TV set.
11 Hookup and Settings Connections to Y our TV Make one of the following connections, depending on the capabilities of your existing equipment. When using the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks, set the VIDEO OUT SELECT switch to COMPONENT .
12 Connecting to an Amplifier Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic Connect the Left and Right AUDIO OUT jacks on the recorder to the audio left and right in jacks on your amplifier , receiver , or stereo system, using the audio cables (A) .
13 Hookup and Settings Accessory Audio/Video (A/V) Connections Connecting a P A Y -TV/Canal Plus Decoder Yo u can watch or record P A Y -TV/Canal Plus programmes if you connect a decoder (not supplied) to the recorder . Disconnect the recorder ’s mains lead from the mains when connecting the decoder .
14 Connecting to the A V IN 3 or A V IN 4 Jacks Connect the input jacks (A V IN 3, A V IN 4) on the recorder to the audio/video out jacks on your accessory component, using audio/video cables. Note: If you use the S-VIDEO IN jack on the front panel, the VIDEO IN jack on the front panel is not available.
15 Hookup and Settings Using the Home Menu From the Home Menu screen you can access all the Media for playback and recording of the recorder . 1. Press HOME to display the Home Menu screen. 2. Use the b / B buttons to select a main option you want. Sub options appears.
16 General Settings (Continued) Program Edit Y ou can edit a channel manually (add, delete, name, move, etc.). 1. Select [Program Edit] option then press B . 2. Press ENTER while [Edit] is selected. The Program List menu appears. 3. Use v / V to select a PR number then press ENTER.
17 Hookup and Settings General Settings (Continued) Auto Clock Set When Channel auto search is completed the actual T ime and Date are also set automatically . If the time in the recorder display is not correct, the clock must be set manually . 1. Select [Clock set] option then press B .
18 General Settings (Continued) Initialization Y ou can reset the recorder to its original factory settings and initialize the HDD. [Factory Set] If you need to, you can reset the recorder to all its factory settings. [HDD format] Initializes the HDD (Hard Disk Drive): everything recorded on the HDD will be erased.
19 Hookup and Settings Lock Settings DivX Registration Code We provide you the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit www .divx.com/vod. 1. Select [DivX Reg.
20 Disc Settings Disc Format If you load a completely blank disc, the recorder will initialize the disc. DVD-R: The recorder initialize the disc to Video mode. The recording mode will always be V ideo mode. DVD-RW/DVD+R W/DVD+R: The Initialize menu will appears.
21 Hookup and Settings Disc Settings (Continued) Disc Label Use this to enter a name for the disc. This name appears when you load the disc and when you display disc information on-screen. The disc name can be up to 32 characters long. For discs formatted on a different recorder , you will see only a limited character set.
22 General Explanation of On-Screen Display This manual gives basic instructions for operating the recorder . Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the recorder or is not available on the disc.
23 Playback Playback General Playback Features 1. Load your chosen disc in the tray , with the playback side down. 2. Starts playback using HOME menu (see page 15). 3. T o stop the playback, press STOP ( x ). The unit records the stopped point, depending on the disc.
24 General Playback Features (Continued) Buttons Operations ZOOM During playback or pause mode, press ZOOM to enlarge the video image. (x1 size → x2 size → x4 size → x1 size (normal size) Y ou can move through the zoomed picture using bBvV buttons.
25 Playback If a menu screen is displayed The menu screen may be displayed first after loading a DVD or Video CD which contains a menu. Use the b / B / v / V buttons to select the title/chapter you want to view , then press ENTER to start playback. Press TITLE or MENU/LIST to return to the menu screen.
26 3D Surround This unit can produce a 3D Surround effect, which simulates multi-channel audio playback from two conventional stereo speakers, instead of the five or more speakers normally required to listen to multi- channel audio from a home theater system.
27 Playback Playing a DivX Movie File The recorder can play Divx files. Before playing DivX files, read “DivX file requirement” on right. 1. Press HOME then select [MOVIE] option. 2. Select a media that contains DivX file(s) then press ENTER. The [Movie List] menu appears on the TV screen.
28 Playing an Audio CD or MP3/WMA file The recorder can play audio CDs and MP3/WMA files. Before playing MP3/WMA files, read “MP3/WMA audio file requirement” on right. 1. Press HOME. The HOME menu appears. 2. Select [MUSIC] option. 3. Select a media that contains MP3/WMA or audio title then press ENTER.
29 Playback Program Playback with Audio CD and MP3/WMA file Program Playback enables you to make custom playlists of Audio CD or MP3/WMA tracks. Programs can contain up to 99 Audio CD tracks or 256 MP3/WMA files. 1. Use v / V to select a track/file (or folder) on the Audio CD or Music menu.
30 V iewing a JPEG File The recorder can play JPEG files. Before playing JPEG recordings, read “Photo file requirement” on right. 1. Press HOME. The HOME menu appears. 2. Select [PHOTO] option. 3. Select a media that contains JPEG file then press ENTER.
31 Playback Skip Images While viewing a picture, press . or > once to advance to the next file or return to the previous file. Rotate Images Use v / V while viewing a picture to flip the picture clockwise or counterclockwise.
32 Editing a MP3/WMA, JPEG, DivX file These descriptions are MP3 file’s operation for example, other kind’s files are operated same way . Erasing a file(s)/folder(s) from the HDD Y ou can erase MP3/WMA, JPEG or DivX file(s)/ folder(s) on the HDD. 1.
33 Playback Copying a file(s) to a folder on HDD Y ou can copy a file(s)/folder(s) to a folder on HDD. 1. Select a file you wish to copy on the menu. Yo u can select all files and folders on the menu by pressing CLEAR button. T o cancel the selections, press CLEAR again.
34 Recording About DVD recording Notes: This recorder cannot make recordings on CD-R or CD-RW discs. Our company takes no responsibility for recording failure due to power outages, defective discs, or damage to the Recorder . Fingerprints and small scratches on a disc can affect playback and/or recording performance.
35 Recording T imeshift Do not miss a scene from a live broadcast. If the telephone rings while you are watching your favorite live broadcast, just press “TIMESHIFT” and “P AUSE ( X )” before answering the phone. The timeshift function will be activated and the broadcast is then recorded for later viewing.
36 Basic Recording from a TV Follow the instructions below to record a TV program. Recording starts immediately and continues until the disc is full or you stop the recording. Note: Y ou must load a recordable disc for DVD recording. 1. Press HOME. The HOME menu appears.
37 Recording T imer Recording This recorder can be programmed to record up to 16 programs within a period of 1 month. For unattended recording, the timer needs to know the channels to be recorded, the starting and ending time. Note: If you use a completely blank disc for timer recording, you must format the disc before starting timer recording.
38 T imer Recording with S HOW V IEW ® System This system makes programming timer recordings very simple. Most TV guides publish S HOW V IEW programming numbers with their program details.If you want to make a timer recording of a program, you just input the corresponding S HOW V IEW programming number .
39 Recording Checking Timer Recording Details Programming can be checked whenever the recorder is turned on. Press TIMER REC twice. Use v / V to select a timer recording. Press ENTER to edit the selected program. T imer Record menu appears. Press CLEAR to delete the selected program from the T imer Record List.
40 Recording from DV Input Before DV dubbing Y ou can connect a DV -equipped camcorder to this recorder using a single DV cable for input and output of audio, video, data and control signals. This recorder is only compatible with DV -format (DVC-SD, DV25) camcorders.
41 Recording Simultaneous recording and playback Playback another title during recording Playback and recording for both DVD and built in hard disk drive (HDD) are completely independent. For example, you can record to either the DVD or HDD source and play back video from the other source at the same time.
42 Editing T itle List and Chapter List Menu Overview Using the T itle List menu you can edit video content. The editing features available in the T itle List menu depend on whether you are editing video on DVD, or the HDD, and whether you’re editing Original content, or a Playlist.
43 Editing HDD, VR Mode: Original and Playlist Editing T itles, Chapters and Parts T itles in the disc’s original content contain one or more chapters. When you insert a disc’s title into the Playlist, all the chapters within that title also appear .
44 Making a New Playlist Use this function to add an Original title or chapter to the Playlist. When you do this, the whole title is put into the Playlist (you can delete bits you don’t need later — see Deleting an Original or Playlist title/chapter on page 45).
45 Editing Deleting an Original or Playlist T itle/Chapter When you erase a title or chapter from the Playlist menu, you only remove it from the Playlist; the title/chapter remains in the Original menu.
46 Naming a Title Y ou can name Original and Playlist titles independently . Names can be up to 32 characters long. 1. Choose the title you want to name on the T itle List menu, then press ENTER. The menu options appears on the left side of the menu. 2.
47 Editing Sort This function allows you to access show listings organized by Date, T itle, or Category on the Title List- HDD menu. So you can find title you want to watch easily . 1. Choose any title on the T itle List-HDD menu, then press ENTER. The menu options appears on the left side of the menu.
48 Divide One Titles Into T wo Use this command to split a title up into two new titles. 1. On the T itle List menu, select a title you want to divide then press ENTER. The menu options appears on the left side of the screen. 2. Select [Divide] option.
49 Editing Moving a Playlist Chapter Use this function to re-arrange the playing order of Playlist chapters on the T itle List-Playlist menu. Note: This function is not available if there is only one chapter . 1. Select a chapter on the Chapter List-Playlist menu.
50 Dubbing Before Dubbing Use the copying features of this recorder to: Back up important recordings stored on the HDD to a DVD. Make a DVD copy of a recording on the HDD to play in another player . Tr ansfer video from a DVD to the HDD for editing.
51 Dubbing Dubbing from HDD to DVD 1. On the T itle List-HDD menu, select a title you want to dub then press ENTER. The menu options appears on the left side of the screen. 2. Use v / V to select [Dubbing] option then press ENTER. Dubbing menu appears.
52 One T ouch Copy (HDD to DVD) The One T ouch Copy feature copies the currently playing title from the HDD to DVD. The whole title is copied, regardless of where in the title you start copying. The recorder copies at the maximum speed possible. For One T ouch Copy to work, make sure that a recordable DVD disc is loaded.
53 Dubbing Reference Additional Information Overwriting Recording To overwrite a new video recording on a previously recorded title, follow these steps. This feature is not available for DVD+Rs, that always record at the end of the Disc. 1. Select input source you want to record (TV channel, A V1-4, DV).
54 Language Code Abkhazian 6566 Afar 6565 Afrikaans 6570 Albanian 8381 Ameharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 A ymara 6588 Azerbaijani 6590 Bashkir 6665 Basque 6985 Bengali; Bangla 6678.
55 Reference Cause The power cord is disconnected. TV/VIDEO mode for the recorder is set to TV . The TV is not set to receive recorder signal output. The video cable is not connected securely . The connected TV power is turned of f.
56 Symptom Cannot play a disc recorded using this recorder on another player . Cannot record or did not record successfully . T imer recording is not possible. Stereo Audio Record and/or Playback is not present. The remote control does not work properly .
57 Reference Specifications General Power requirements AC 2 2 0-240 V , 50/60 Hz Power consumption 35W Dimensions (approx.) 430 X 54 X 275 mm (w x h x d) without foot Mass (approx.
Printed in Indonesia 0406MNH-LG-LG DR-MH220SE P/NO : MFL30384212 EN EU.
An important point after buying a device JVC LPT1132-001A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC LPT1132-001A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC LPT1132-001A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC LPT1132-001A you will learn all the available features of the product, as well as information on its operation. The information that you get JVC LPT1132-001A will certainly help you make a decision on the purchase.
If you already are a holder of JVC LPT1132-001A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC LPT1132-001A.
However, one of the most important roles played by the user manual is to help in solving problems with JVC LPT1132-001A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC LPT1132-001A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
