Instruction/ maintenance manual of the product KV-MH6500 JVC
Go to page of 40
ENGLISH ESP AÑOL FRANÇAIS MONITEUR COULEUR À ÉCRAN LARGE DE 6,5 POUCES KV -MH6500 6.5-INCH WIDE COLOR MONIT OR KV -MH6500 MONIT OR COLOR DE P ANT ALLA ANCHA DE 6,5-PULGAD AS KV -MH6500 INSTR UCTIO.
2 ENGLISH W ARNING: T O PREVENT FIRE OR SHOCK HAZARD , DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CA UTION: This monitor system should be used with DC 12V only .
3 ENGLISH BEFORE USE * F or safety .... • Do not raise the volume level too muc h, as this will block outside sounds, making driving danger ous. • Stop the car befor e performing any complicated operations.
4 ENGLISH Cautions for handling the liquid crystal panel The red spots, blue spots and green spots on the panel surface are a normal characteristic of liquid crystal panels, and not a problem. The liquid crystal panel is built with very high precision technology and has at least 99.
5 ENGLISH Wide color monitor 1 Screen (Liquid crystal panel) 2 Remote sensor Aim at this area when operating the monitor from the remote controller . 3 Down button ( ) Decrease the adjustment level of (or select an appropriate setting for) the item selected by the Menu button.
6 ENGLISH Remote controller RM-RK500 Monitor section 1 Power On/Standby button ( ) T urn on or off the monitor system. 2 Up button ( ) Increase the adjustment level of (or select an appropriate setting for) the item selected by the MENU button.
7 ENGLISH Before using the remote contr oller: When you use the remote controller for the first time, pull out the insulation sheet as illustrated to the right. • Aim the remote controller directly at the remote sensor on the color monitor . Make sure there is no obstacle in between.
8 ENGLISH BASIC OPERA TIONS Preparation Before operating the monitor system, make sure that all external components are correctly connected and installed.
9 ENGLISH 4 Play back the external component. T o operate the external components, refer to the manuals for the connected components. 5 Select the external component and adjust the volume on the car receiver . T o check the current input source On the monitor: Press the Power button ( ) once.
10 ENGLISH ADJUSTMENTS Using the Menu Y ou can make your own adjustments using the Menu. • For the adjustable items, see the next page. Basic procedure 1 Call up the Menu. 2 Select an item you want to adjust. Each time you press the button, the cursor moves to the next item.
11 ENGLISH 4 Exit from the Menu. • Press the button repeatedly until the Menu is erased. Adjustable items on the menu Note: Menu goes off if no oper ation is done for about 5 seconds.
12 ENGLISH FORMA T : Select an appropriate display size. • Selectable settings: FULL/NORMAL/ZOOM • Initial setting: FULL When viewing 16:9 video signals: FULL: Pictures are fully shown on the screen. • The black bars will be shown both at the top and the bottom of the screen.
13 ENGLISH MAINTENANCE T o prevent damage to the exterior • Do not apply pesticides, benzine, thinner or other volatile substances to the unit. The cabinet surface primarily consists of plastic materials. • Do not wipe with benzine, thinner or similar substances because this will results in discoloration or removal of the paint.
14 ENGLISH Remedies See “Note” on page 15. Select the correct input mode. Select the correct video format. Install a new battery . Do not expose the remote sensor to strong light. TROUBLESHOOTING Symptoms • Colored spots (red, blue and green) appear on the screen.
15 ENGLISH SPECIFICA TIONS WIDE COLOR MONITOR Display: 6.5 inch Liquid crystal panel Number of Pixel: 280 800 pixels (400 vertical × 234 horizontal × 3) Drive Method: TFT (Thin Film T ransistor) act.
0303MNMMDWPUN EN, GE, FR, NL © 2003 VICTOR COMP ANY OF JAP AN, LIMITED J V C VICTOR COMPANY OF JAPAN, LIMITED COVER_MR6500_003A[E]f.pm6 03.3.15, 23:50 2.
– 1 – KV -MH6500 Installation/Connection Manual Einbau/Anschlußanleitung Manuel d’installation/raccordement Handleiding voor installatie/aansluiting ENGLISH L VT0990-004A [E] Parts list for installation and connection The f ollowing par ts are pro vided with this unit.
– 2 – Mounting the color monitor It is recommended to have the monitor system installed by a qualified technician. Before mounting the monitor to the headrest: • Perform the required external connections first. • Using the supplied paper pattern, mark the area to be cut out of the headrest, then carefully cut it.
– 3 – 250V 5A 250V 1A 4 1 2 3 *1: Before checking the oper ation of this unit prior to installation, this lead must be connected, otherwise power cannot be tur ned on.
– 4 – ATT Wide color monitor Breitbild-Farbmonitor Moniteur couleur à é cran large Breedkleur-monitor CONNECTING THE EXTERNAL COMPONENTS Connect the monitor to T O MONIT OR jack using the system cord supplied with the unit. The monitor connection unit provides 2 input circuits and 1 output circuit.
ENGLISH DEUTSCH FRANÇAIS * This system cannot receive television broadcasts and is primarily designed for use with a VCR or a DVD player . Use the separately sold mobile TV tuner unit KV -C10 for optional television broadcast reception.
2 ENGLISH W ARNING: T O PREVENT FIRE OR SHOCK HAZARD , DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CA UTION: This monitor system should be used with DC 12V only .
3 ENGLISH INFORMA TION (For U.S.A. only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
4 ENGLISH Cautions for handling the liquid crystal panel The red spots, blue spots and green spots on the panel surface are a normal characteristic of liquid crystal panels, and not a problem. The liquid crystal panel is built with very high precision technology and has at least 99.
5 ENGLISH Wide color monitor 1 Screen (Liquid crystal panel) 2 Remote sensor Aim at this area when operating the monitor from the remote controller . 3 Down button ( ) Decrease the adjustment level of (or select an appropriate setting for) the item selected by the Menu button.
6 ENGLISH Remote controller RM-RK500 Monitor section 1 Power On/Standby button ( ) T urn on or off the monitor system. 2 Up button ( ) Increase the adjustment level of (or select an appropriate setting for) the item selected by the MENU button.
7 ENGLISH Before using the remote contr oller: When you use the remote controller for the first time, pull out the insulation sheet as illustrated to the right. • Aim the remote controller directly at the remote sensor on the color monitor . Make sure there is no obstacle in between.
8 ENGLISH BASIC OPERA TIONS Preparation Before operating the monitor system, make sure that all external components are correctly connected and installed.
9 ENGLISH 4 Play back the external component. T o operate the external components, refer to the manuals for the connected components. 5 Select the external component and adjust the volume on the car receiver . T o check the current input source On the monitor: Press the Power button ( ) once.
10 ENGLISH ADJUSTMENTS Using the Menu Y ou can make your own adjustments using the Menu. • For the adjustable items, see the next page. Basic procedure 1 Call up the Menu. 2 Select an item you want to adjust. Each time you press the button, the cursor moves to the next item.
11 ENGLISH 4 Exit from the Menu. • Press the button repeatedly until the Menu is erased. Adjustable items on the menu Note: Menu goes off if no oper ation is done for about 5 seconds.
12 ENGLISH FORMA T : Select an appropriate display size. • Selectable settings: FULL/NORMAL/ZOOM • Initial setting: FULL When viewing 16:9 video signals: FULL: Pictures are fully shown on the screen. • The black bars will be shown both at the top and the bottom of the screen.
13 ENGLISH MAINTENANCE T o prevent damage to the exterior • Do not apply pesticides, benzine, thinner or other volatile substances to the unit. The cabinet surface primarily consists of plastic materials. • Do not wipe with benzine, thinner or similar substances because this will results in discoloration or removal of the paint.
14 ENGLISH Remedies See “Note” on page 15. Select the correct input mode. Select the correct video format. Install a new battery . Do not expose the remote sensor to strong light. TROUBLESHOOTING Symptoms • Colored spots (red, blue and green) appear on the screen.
15 ENGLISH SPECIFICA TIONS WIDE COLOR MONITOR Display: 6.5 inch Liquid crystal panel Number of Pixel: 280 800 pixels (400 vertical × 234 horizontal × 3) Drive Method: TFT (Thin Film T ransistor) active matrix format Dimensions (W × H × D): 184 mm × 124 mm × 31 mm (7-1/4” × 4-15/16” × 1-1/4”) including Shroud Mass: 325 g (0.
0303MNMMDWPUN EN, SP , FR © 2003 VICTOR COMP ANY OF JAP AN, LIMITED J V C VICTOR COMPANY OF JAPAN, LIMITED http://www . j v cmobil e. c om Visit us on -line for T e chnical Suppo r t & C ustomer Satisfa ction Survey . US RESIDENTS ONL Y COVER_KV-MH6500[J]f.
– 1 – KV -MH6500 Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement FRANÇAIS ESP AÑOL ENGLISH L VT0989-002A [J] W ARNING Installation requires some special knowledge. Do not install the monitor system your self.
– 2 – INST ALACION • La siguiente ilustración muestra una instalación típica. Sin embargo usted deberá efectuar los ajustes correspondientes a su automóvil.
– 3 – 250V 5A 250V 1A 4 1 2 3 * 1 : Before checking the operation of this unit prior to installation, this lead must be connected, otherwise power cannot be turned on. * 1 : Antes de comprobar el funcionamiento de esta unidad previa a de la instalación, es necesario conectar este cable, de lo contrario no se podrá conectar la alimentación.
– 4 – HEADPHONE ANTENNA INPUT INPUT 2 INPUT 1 12 23 4 VIDEO L R VIDEO CONT AUDIO L R AUDIO VIDEO 1 OUTPUT RL VIDEO TO DISPLAY VOCAL POWER SUPPLY AUDIO ATT ATT Wide color monitor Monitor color de p.
An important point after buying a device JVC KV-MH6500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC KV-MH6500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC KV-MH6500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC KV-MH6500 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC KV-MH6500 will certainly help you make a decision on the purchase.
If you already are a holder of JVC KV-MH6500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC KV-MH6500.
However, one of the most important roles played by the user manual is to help in solving problems with JVC KV-MH6500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC KV-MH6500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
