Instruction/ maintenance manual of the product KS-FX490 JVC
Go to page of 33
ENGLISH GET0120-001A [J] ESP AÑOL FRANÇAIS CASSETTE RECEIVER KS-FX490 INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL D ’ INSTRUCTIONS RECEPT OR-REPRODUCT OR DE CASSETTE KS-FX490 RADIOCASSETTE KS-FX490 For customer Use: Enter below the Model No. and Serial No.
2 ENGLISH CONTENTS Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. How to reset your unit ...............
3 ENGLISH q 24 37 u t y e 8 7 6 1 9 p w 5 i o ; r TAPE 200W Multi Music Scan KS-FX490 Display window s a d g f hk / z x l j c LOCA TION OF THE BUTTONS Control panel Display window a T ext information .
ENGLISH 4 Preparing the remote controller 2. Place the battery . Slide the battery into the holder with the + side facing upwards so that the battery is fixed in the holder . Lithium coin battery (product number: CR2025) 3. Return the battery holder .
ENGLISH 5 Remote controller RM–RK60 S 1 • T urns on the unit if pressed when the unit is turned off. • T urns o f f the unit if pressed and held until “ SEE YOU ” appears on the displa y . • Drops the volume level in a moment if pressed briefl y .
6 ENGLISH 1 3 2 BASIC OPERA TIONS 3 Adjust the volume. 4 Adjust the sound as you want. (See pages 13 – 14.) T o drop the volume in a moment Press briefly while listening to any source. “A TT” starts flashing on the display , and the volume level will drop in a moment.
7 ENGLISH Listening to the radio Y ou can use either automatic searching or manual searching to tune in to a particular station. Searching a station automatically: Auto search 1 Select the band (FM1 – 3, AM). Note: This r eceiver has thr ee FM bands (FM1, FM2, FM3).
8 ENGLISH Storing stations in memory Y ou can use one of the following two methods to store broadcasting stations in memory . • Automatic preset of FM stations: SSM (Strong- station Sequential Memor.
9 ENGLISH Manual preset Y ou can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually . Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band 1 Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).
10 ENGLISH T APE OPERA TIONS Listening to a cassette Y ou can play back type I (normal) tapes. 1 Open the control panel. Note on One-T ouch Operation: When a cassette is alr eady in the cassette compartment, select tape as the sour ce by pr essing T APE CD-CH to start tape play automaticall y .
11 ENGLISH T o play back tapes recorded with the Dolby B NR* 1 Press MODE to enter the functions mode while listening to a tape. “MODE” flashes on the upper part of the display , and the number buttons work as different function buttons. 2 Press (Dolby B), while “MODE” is still on the display so that the (Dolby B) indicator lights up.
12 ENGLISH Other convenient tape functions Skipping the blank portions on the tape Y ou can skip blank portions between the tunes (Blank Skip). When this function is on, the unit skips blank portions of 15 seconds or more, fast-forwards to the next tune, then starts playing it.
13 ENGLISH SOUND ADJUSTMENTS Indication For: Preset values BAS TRE LOUD USER (Flat sound) 00 00 OFF ROCK Rock or +03 +01 ON disco music CLASSIC Classical +01 –02 OFF music POPS Light music +04 +01 OFF HIP H OP Funk or Rap +02 00 ON music JAZZ Jazz music +02 +03 OFF JAZZ POPS USER ROCK CLASSIC HIP HOP Ex.
14 ENGLISH Adjusting the sound Y ou can adjust the sound characteristics to your preference. 1 Select the item you want to adjust. Each time you press the button, the adjustable items change as follows: Indication T o do: Range BAS* 1 Adjust the bass.
15 ENGLISH OTHER MAIN FUNCTIONS Setting the clock 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display . (See page 16.) 2 Set the hour . 1 Select “CLOCK H (hour)” if not shown on the display . 2 Adjust the hour .
16 ENGLISH 1 2 Select. Hold. 3 Advance Back Back Advance 1:00 15 ON ON Counter- clockwise Factory-preset settings Set. See page Clockwise CLOCK H Hour adjustment CLOCK M Minute adjustment CLOCK Clock LEVEL Level display B.
17 ENGLISH T o select the level meter – LEVEL Y ou can select the level display according to your preference. When shipped from the factory , “AUDIO 2” is selected. • AUDIO 1: Shows the audio level indicator . • AUD IO 2: Alternates between “AUDIO 1” setting and illumination display .
18 ENGLISH Attaching the control panel 1 Insert the right side of the control panel into the groove on the panel holder . 2 Press the left side of the control panel to fix it to the panel holder . Note on cleaning the connectors: If you fr equently detach the contr ol panel, the connectors will deteriorate.
19 ENGLISH CD CHANGER OPERA TIONS We recommend that you use the JVC MP3- compatible CD changer with your unit. By using this CD changer , you can play back your original CD-Rs (Recordable) and CD-RWs (Rewritable) recorded either in audio CD format or in MP3 format.
20 ENGLISH Press ¢ briefly during play , to skip ahead to the beginning of the next track/file. Each time you press the button consecutively , the beginning of the next tracks/files is located and played back. Press 4 briefly during play , to skip back to the beginning of the current track/file.
21 ENGLISH This operation is only possible when using JVC MP3-compatible CD changer (CH-X1500). T o go to a track/file quickly 1 Press MODE to enter the functions mode while playing a disc.
22 ENGLISH Playing a CD T ext In a CD T ext, some information about the disc (its disc title, performer , and track title) is recorded. This CD T ext information will be shown automatically when you play a CD T ext. T o change the CD T ext information manually , select text display mode while playing a CD T ext.
23 ENGLISH Selecting the playback modes T o play back tracks/files at random (Folder Random/Disc Random/Magazine Random Play) 1 Press MODE to enter the functions mode during play . “ MODE ” flashes on the upper part of the display . 2 Press RND (random), while “ MODE ” is still flashing on the display .
ENGLISH 24 EXTERNAL COMPONENT OPERA TIONS Playing an external component Y ou can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied).
25 ENGLISH MAINTENANCE This unit requires very little attention, but you will be able to extend the life of the unit if you follow the instructions below . T o clean the head • Clean the heads after every 10 hours of use using a wet-type head cleaning tape (available at an audio store).
26 ENGLISH TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center . Remedies Adjust it to the optimum le v el. Check the cords and connections. Press the reset button on the panel holder after detaching the control panel.
27 ENGLISH Remedies Inser t discs into the magazine. Inser t discs correctly . Inser t pla y able discs . Inser t the magazine. Inser t a disc that contains MP3 files. Add the e xtension code — mp3 to their file names. Change the disc. (Record MP3 files using a compliant application.
28 ENGLISH SPECIFICA TIONS AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8 % total harmonic distortion.
EN, SP , FR 0303KKSFLEJEIN VICTOR COMPANY OF JAPAN, LIMITED Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONL Y Call 1-800-252-5722 http://www .jvc.com W e can help you! http://www . j v cmobil e.
1 5 3 m m (7 - 1/4") 1 8 4 m m (2 - 1/8") KS-FX490 Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement ESP AÑOL • Esta unidad está diseñada para funcionar con 12 V de CC, con sistemas eléctricos de masa NEGA TIV A.
2 • When installing the unit without using the sleeve • Instalación de la unidad sin utilizar la cubierta • Lors de l’installation de l’appareil sans utiliser de manchon In a T oyota for example, first remove the car radio and install the unit in its place.
3 L R + - + - + - + - L R + - + - + - + - L R + - + - + - + - PRECAUTIONS on power supply and speaker connections: • DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit will be seriously damaged.
4 INPUT R L LINE OUT (REAR) L R L R LINE OUT (FRONT) * R L R L INPUT R L LINE OUT REAR FRONT * Connecting the leads / Conexión de los conductores / Raccordement des fils CAUTION / PRECAUCION / PRECAUTION: • T o prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.
An important point after buying a device JVC KS-FX490 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC KS-FX490 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC KS-FX490 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC KS-FX490 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC KS-FX490 will certainly help you make a decision on the purchase.
If you already are a holder of JVC KS-FX490, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC KS-FX490.
However, one of the most important roles played by the user manual is to help in solving problems with JVC KS-FX490. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC KS-FX490 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
