Instruction/ maintenance manual of the product KS-F190 JVC
Go to page of 22
INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL D’INSTRUCTIONS For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this information for future reference. Model No. Serial No. GET0107-001A [J] For installation and connections, refer to the separate manual.
2 ENGLISH How to reset your unit Press and hold both the SEL (Select) and (Standby/On/Attenuator) buttons at the same time for several seconds. This will reset the built-in microcomputer . Note: • Y our pr eset adjustments — such as pr eset channels or sound adjustments — will also be er ased.
3 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ...............
ENGLISH 4 LOCA TION OF THE BUTTONS Control panel 1 (Standby/On/Attenuator) button 2 + / – buttons 3 S.BASS (Super bass) button 4 0 (Eject) button 5 Cassette compartment 6 1 / ¡ (PROG: program) butt.
5 ENGLISH BASIC OPERA TIONS 4 Adjust the sound as you want (See pages 1 1-12). T o drop the volume in a moment Press briefly while listening to any source. “A TT” starts flashing on the display , and the volume level will drop in a moment. T o resume the previous volume level, press the button briefly again.
6 ENGLISH RADIO OPERA TIONS Listening to the radio Y ou can use either automatic searching or manual searching to tune in to a particular station. Note: When a cassette is in the cassette compartment, you cannot select the tuner . Be sure to eject the cassette fr om the cassette compartment to listen to the r adio.
7 ENGLISH 3 T une in to a station you want while “ M ” is flashing. • If you release your finger from the button, the manual mode will automatically turn off after 5 seconds. • If you hold down the button, the frequency keeps changing (in 200 kHz intervals for FM and 10 kHz for AM) until you release the button.
8 ENGLISH T uning in to a preset station Y ou can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on page 7 and 8. 1 Select the band (FM1 – 3, AM) you want.
9 ENGLISH Notes: • A pr eviously pr eset station is er ased when a ne w station is stor ed in the EX button. • The pr eset station is er ased when the pow er supply to the memory cir cuit is interrupted (for example , during battery replacement). If this occurs, pr eset the station ag ain.
10 ENGLISH T APE OPERA TIONS Listening to a cassette Y ou can playback type I (normal) tapes. 1 T urn on the power . Note on One-T ouch Operation: If a cassette is alr eady in the cassette compartment, tape play starts automatically .
11 ENGLISH T urning on/off the super bass function The super bass function allows you to maintain the richness and fullness of the bass sound regardless of how low you set the volume. Each time you press S.BASS, the function turns on and off alternately .
12 ENGLISH Storing your own sound adjustments Y ou can adjust the sound modes (BEA T , SOFT , POP) to your preference and store your own adjustments in memory . • There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
13 ENGLISH OTHER MAIN FUNCTIONS Setting the clock 1 Press and hold the SEL (Select) for more than 2 seconds. “CLOCK H” or “CLOCK M” appears on the display . 2 Set the hour . 1 Select “CLOCK H” if not shown on the display . 2 Adjust the hour .
14 ENGLISH Detaching the control panel Y ou can detach the control panel when leaving the car . When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder . Detaching the control panel Before detaching the control panel, be sure to turn off the power .
15 ENGLISH MAINTENANCE This unit requires very little attention, but you will be able to extend the life of the unit if you follow the instructions below . T o clean the heads • Clean the heads after every 10 hours of use using a wet-type head cleaning tape (available at an audio store).
16 ENGLISH TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center . Symptoms • A cassette tape cannot be inserted. • Cassette tapes become hot. • T ape sound is at very low level and sound quality is degraded.
17 ENGLISH AUDIO AMPLIFIER SECTION Maximum Power Output: Front : 45 W per channel Rear : 45 W per channel Continuous Power Output (RMS): Front : 17 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear : 17 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.
1002KKSFLEJEIN J V C EN, SP , FR VICTOR COMPANY OF JAPAN, LIMITED Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONL Y Call 1-800-252-5722 http://www .jvc.com W e can help you! http://www .
1 KS-FX220/KS-F190 Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement ESP AÑOL • Esta unidad está diseñada para funcionar con 12V de CC, con sistemas eléctricos de masa NEGA TIV A.
2 Liste des pièces pour l’installation et raccordement Les pi è ces suivantes sont fournies avec cet appareil. Apr è s v é rification, veuillez les placer correctement. Lista de piezas para instalación y conexión Con esta unidad se suministran las siguientes piezas.
3 10 2 1 3 3 4 5 2 1 ENGLISH ELECTRICAL CONNECTIONS T o prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical connections before installing the unit. If you are not sure how to install this unit correctly , have it installed by a qualified technician.
4 PRECAUTIONS on power supply and speaker connections: • DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit will be seriously damaged. • Connect the black lead (ground), yellow lead (to car battery , constant 12V), and red lead (to an accessory terminal) correctly .
An important point after buying a device JVC KS-F190 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC KS-F190 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC KS-F190 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC KS-F190 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC KS-F190 will certainly help you make a decision on the purchase.
If you already are a holder of JVC KS-F190, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC KS-F190.
However, one of the most important roles played by the user manual is to help in solving problems with JVC KS-F190. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC KS-F190 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
