Instruction/ maintenance manual of the product KD-X250BT JVC
Go to page of 36
DIGITAL MEDIA RECEIVER INSTRUCTION MANUAL RECEPTOR DE MEDIOS DIGITALES MANUAL DE INSTRUCCIONES RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE MANUEL D’INSTRUCTIONS Please read all instructions carefully before operation to obtain the best possible performance from the unit.
IC (Industry Canada) Notice This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
How to attach/detach the faceplate How to reset your unit Your preset adjustments will also be erased. Maintenance Cleaning the unit Wipe off dirt on the faceplate with a dry silicon or soft cloth. Cleaning the connector Detach the faceplate and clean the connector with a cotton swab gently, taking care not to damage the connector.
Canceling the display demonstration The display demonstration is always turned on unless you cancel it. (Hold) 1 (Initial setting) 2 3 Select <DEMO OFF>. 4 Press MENU to exit. Setting the clock (Hold) 1 2 Select <CLOCK>. 3 Select <CLOCK SET>.
Remote contr ol USB input terminal A UX input jack DO NO T expose to bright sunlight. Aim the remote contr ol directly at the sensor . Remote sensor Detaches the faceplate Display window V olume knob F ac eplate When you press or hold the following button(s).
Searching for a station A B Select <FM> or <AM>. Auto search. (Press) Manual search. (Hold) “ M ” flashes, then press the button repeatedly. “ ST ” lights up when receiving an FM stereo broadcast with sufficient signal strength.
Setting the Radio Timer You can tune in to a preset station at a specific time regardless of the current source. (Hold) 1 - < TUNER > - < RADIO TIMER > - < OFF > / < ONCE > / < DAILY > / < WEEKLY > [OFF] Cancels Radio Timer.
Playing a USB device USB 2.0 cable* (not supplied) USB input terminal The source changes to “ USB ” and playback starts. * Do not leave the cable in the car when not in use. This unit can play MP3/WMA files stored in USB mass storage device (such as a USB memory and Digital Audio Player).
iPod/iPhone Playing an iPod/iPhone USB 2.0 cable* (accessory of the iP od/iPhone) USB input terminal The source changes to “ USB ” - “ USB-IPOD ” and playback starts.
Pandora 姞 Preparation 1 Search for “Pandora” in the Apple iTunes App Store to find and install the most current version of the Pandora application onto your device. 2 In the application on your device, log in and create an account with Pandora. If you are not a registered user, an account can also be created at www.
You can connect an external component to the AUX (auxiliary) input jack on the faceplate. For details, refer also to the instructions supplied with the external components.
Pairing a Bluetooth device When connecting a Bluetooth device to the unit for the first time, perform pairing between the unit and the device. Up to five Bluetooth devices can be registered in this unit. A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any time.
Connecting/Disconnecting a registered device manually To connect 1 (Hold) - < BLUETOOTH > - < PHONE > / < AUDIO > - < CONNECT > 2 Select <CONNECT>. “ CONNECTING ” # “ [Device Name] ” scrolls on the display when the unit is connecting to the device.
Receiving a call To receive a call When there is an incoming call, the source automatically changes to Bluetooth Phone mode. “ RECEIVING ” appears on the display, followed by the phone number or name. or You can also press / / / / SOURCE on the remote control to answer a call.
Making a call from the hands-free menu 1 Enter the hands-free menu. Repeat this step until the desired item is selected. 2 Select a calling method (see following table).
Making a call from memory You can store up to 6 contacts in the memory of this unit for speed dialing. To store contacts in memory 1 Enter the hands-free menu. - < RECENT CALL > / < PHONEBOOK > / < DIAL NUMBER > 2 Select a call method.
Using the SETTINGS menu 1 Enter the hands-free menu. 2 Select <SETTINGS>. To return to the previous menu, press . To exit from the menu, press . 3 Repeat this step to perform the necessary settings. The following settings are applicable to the paired device.
Playing a Bluetooth audio player A Select <BT AUDIO>. Operate the Bluetooth audio player to start playback. Operations and display indications may differ according to their availability on the connected device. Basic operations Pauses or resumes playback.
This unit memorizes sound settings adjusted for each individual source. Selecting the preset sound You can select a preset sound mode, for each individual source, suitable for the music genre. (Hold) 1 - < EQ SETTING > - < EQ PRESET > 2 3 Select the desired sound mode.
(Hold) If no operation is done for about 60 seconds, the operation will be canceled. 1 2 3 Repeat step 2 if necessary. To return to the previous menu, press . To exit from the menu, press DISP or MENU . Menu item Selectable setting (Initial: [XX]) DEMO For settings, ' page 4.
Menu item Selectable setting (Initial: [XX]) AUDIO BEEP (Keytouch tone) [ON] / OFF : Activates or deactivates the keypress tone. AMP GAIN (Amplifier gain) LOW POWER : Limits the maximum volume level to 30. (Select if the maximum input power of each speaker is less than 50 W to prevent damaging the speakers.
Menu item Selectable setting (Initial: [XX]) IPOD SWITCH (iPod/iPhone control) [HEAD MODE] / IPOD MODE / EXT MODE : For settings, ' page 9. (Displayed only when the source is “ USB-IPOD ” .) BLUETOOTH PHONE *7 CONNECT / DISCONNECT : Connects or disconnects the Bluetooth phone/ audio device.
Preparing When you use the remote control for the first time, pull out the insulation sheet. Insulation sheet For USA-California Only: This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material— special handling may apply.
About audio files Playable files File extensions: MP3(.mp3), WMA(.wma) Bit rate: MP3: 8 kbps - 320 kbps WMA: 32 kbps - 192 kbps Sampling frequency: MP3: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz, 12 kHz, 11.025 kHz, 8 kHz WMA: 48 kHz, 44.
About iPod/iPhone iPod/iPhone that can be connected to this unit: - iPod touch (4th generation) - iPod touch (3rd generation) - iPod touch (2nd generation) - iPod touch (1st generation) - iPod cla.
Symptom Remedy/Cause 4 General No sound, sound interrupted or static noise. Check the cords, antenna and cable connections. Check the condition of the connected device and recorded tracks. Ensure to use the recommended stereo mini plug when connecting to an external component.
Symptom Remedy/Cause 4 Bluetooth No Bluetooth device is detected. Search from the Bluetooth device again. Reset the unit. ( ' page 3) Pairing cannot be made. Make sure you have entered the same PIN code to both the unit and Bluetooth device.
AUDIO AMPLIFIER SECTION Power Output 20 W RMS x 4 Channels at 4Ω and ≤ 1% THD+N Load Impedance 4Ω (4Ω to 8Ω allowance) Frequency Response 40 Hz to 20 000 Hz Signal-to-Noise Ratio 80 dBA (reference: 1 W into 4Ω) Line-Out, Subwoofer-Out Level/Impedance 2.
Part list for installation Faceplate (x1) ! Mounting sleeve (x1) " Trim plate (x1) # Wiring harness (x1) $ Extraction keys (x2) Basic procedure 1 Remove the key from the ignition switch, then disconnect the terminal of the car battery. 2 Connect the wires properly.
Installing the unit In-dash mounting Make sure the direction of the trim plate. Bend the appropriate tabs to hold the sleeve firmly in place. Do the required wiring.
Wiring connection MIC Metra Electronics: ww w .metraonline .com Scosche Industries: w ww .scosche.c om Rear/subwoofer output Join the same color wires together . F or more inf ormation: (separately purchased) V ehicle-specific Wiring Harness Make this connection if your vehicle factory wiring harness does not have “12 V ignition switch” wire.
FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
w 0:: :z tn~O ~ :::» ~ w w tn ~ c :::::; 0 tn i= LL 1:!::! :::::» w :z 1- .m ce :z w 0 ~ ...J S::! cc m o::: w c( t; ...J O'W ID ...J<CcC :::E w (.) 0 w :::::;) ~ ~ c LL cC W ...J (.) I= w ...J w m w ==» c a :3 ~ i= W 'W tn :::» w :ESlf= .
CANADA ONLY JVC OWNER'S COPY OF WARRANTY CARD COPIE D'ENREGISTREMENT DE LA GARANTIE DU PROPRIETAIRE CANADA SEULEMENT (Save sales docket toge t her with this warranty card , as a proof of date of pur c hase . La facture et cette garantie sont vos preuves de Ia date d ' achat ; rangez-les .
(e) Any JVC products on which the serial num-ber has been defaced , modified or removed. (f) Maintenance , cleaning or periodic check-up (g) Conversion to foreign or domestic voltage or frequency. (h) Any JVC product without the Canadian Electrical Safety Regulations ID.
TO OUR VALUED CUSTOMER THANK YOU FOR PURCHASING THIS JVC PRODUCT. WE WANT TO HELP YOU ACHIEVE A PERFECT EXPERIENCE. NEED HELP ON HOW TO HOOK UP? NEED ASSISTANCE ON HOW TO OPERATE? NEED TO LOCATE A JVC SERVICE CENTER? LIKE TO PURCHASE ACCESSORIES? JVC IS HERE TO HELP! TOLL FREE: 1 (800)252-5722 http://www.
An important point after buying a device JVC KD-X250BT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC KD-X250BT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC KD-X250BT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC KD-X250BT you will learn all the available features of the product, as well as information on its operation. The information that you get JVC KD-X250BT will certainly help you make a decision on the purchase.
If you already are a holder of JVC KD-X250BT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC KD-X250BT.
However, one of the most important roles played by the user manual is to help in solving problems with JVC KD-X250BT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC KD-X250BT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
