Instruction/ maintenance manual of the product KD-SV3105 JVC
Go to page of 38
ENGLISH VCD/CD RECEIVER KD-SV3105 For canceling the display demonstration, see page 9. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0262-001A [U/UH] KD-SV3105 VIDEO CD PBC ENTER SOURCE EQ BAND VOL. DOWN UP ATT OSD AUDIO 123 456 78 0 9 RETURN REV FWD Cover_KD-SV3105[U_UH]f.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
3 ENGLISH How to reset your unit ........................... 2 How to forcibly eject a disc ................... 2 How to read this manual ........................ 4 How to use the MODE button ............... 4 Control panel — KD-SV3105 ...... 5 Parts identification .
4 ENGLISH How to read this manual The following methods are used to make the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this unit” (see pages 28 and 29). • Button operations are mainly explained with the illustrations as follows: Press briefly.
5 ENGLISH Control panel — KD-SV3105 1 +/– buttons 2 DISP (display) button 3 Remote sensor 4 Loading slot 5 Display window 6 MODE button 7 0 (eject) button 8 ¢ / 4 buttons 9 (standby/on/attenuator.
6 ENGLISH Remote controller — RM-RK120 Installing the lithium coin battery (CR2025) • Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. • DO NOT expose the remote sensor to strong light (direct sunlight or artificial lighting).
7 ENGLISH • Selects the discs while operating the CD changer. – To select disc number 1 – 6, press number button 1 – 6 briefly. – To select disc number 7 – 12, press and hold number button 1 (7) – 6 (12). 6 EQ (equalizer) button • Selects the sound mode (C-EQ: custom equalizer).
8 ENGLISH Getting started Basic operations ~ Ÿ You cannot select some sources if they are not ready. ! For FM/AM tuner ⁄ Adjust the volume. Volume level appears. Volume level indicator @ Adjust the sound as you want. (See pages 21 and 22.) To drop the volume in a moment (ATT) To restore the sound, press it again.
9 ENGLISH Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 24. 1 2 3 4 Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock 1 2 Set the hour and minute.
10 ENGLISH Radio operations Listening to the radio ~ Ÿ Lights up when receiving an FM stereo broadcast with sufficient signal strength. Selected band appears. ! Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again.
11 ENGLISH When an FM stereo broadcast is hard to receive 1 2 Lights up when monaural mode is activated. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off.
12 ENGLISH Manual presetting Ex.: Storing FM station of 92.5 MHz into the preset number 4 of the FM1 band. 1 2 3 4 Preset number flashes for a while. Listening to a preset station 1 2 3 Select the preset station (1 – 6) you want. To check the current clock time while listening to an FM or AM station EN12-21_KD-SV3105[U_UH]3.
13 ENGLISH MP3 and WMA discs playback/search order • When inserting a VCD: Disc operations Playing a disc in the unit The disc type is automatically detected, and playback starts automatically. All tracks will be played repeatedly until you change the source or eject the disc.
14 ENGLISH • When inserting an MP3 or a WMA disc: • When inserting an audio CD or a CD Text disc: To stop play temporarily • To resume playback, press the button again. To stop play and eject the disc Prohibiting disc ejection You can lock a disc in the loading slot.
15 ENGLISH ~ * If you have changed “EXT IN” setting to “EXT IN” (see page 24), you cannot select the CD changer. Ÿ Select a disc. For disc number from 01 – 06: For disc number from 07 – 12: Playing a disc in the CD changer About the CD changer It is recommended to use the JVC MP3- compatible CD changer with your unit.
16 ENGLISH MP3 discs playback/search order in the CD changer • When the current disc is an MP3 disc: • When the current disc is an audio CD or a CD Text disc: * 1 “ROOT” appears if no folder is included in the disc. * 2 Elapsed playing time appears for a while if the current disc is an audio CD.
17 ENGLISH To go to the next or previous folders (only for MP3 or WMA discs) For MP3 discs: For WMA discs: 1 2 To next folders. To previous folders. To locate a particular track (for audio CD, CD Text.
18 ENGLISH On-Screen (OSD) information This operation is only possible when using the remote controller. You can check the track number and elapsed playing time if the monitor is turned on. While playing a disc.... • To turn off the On-Screen Display, press the button again.
19 ENGLISH While playing an MP3 ( / ) or WMA ( ) disc • Only for MP3 disc: When “TAG DISP” is set to “TAG ON” (see page 24) • For MP3 disc: When “TAG DISP” is set to “TAG OFF” • For WMA disc: * 1 If the current disc is an audio CD or a VCD, “NO NAME” appears.
20 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. • For VCD: While PBC (see page 17) is not in use. 1 2 Select your desired playback mode. Repeat play Ex.: When “TRK RPT” is selected while playing an MP3 disc Mode Plays repeatedly TRK RP T : The current track.
21 ENGLISH Sound adjustments Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode suitable to the music genre. ~ Ex.
22 ENGLISH Adjusting the sound You can adjust the sound characteristics to your preference. 1 Ex.: When “TRE” is selected 2 Indication pattern changes as you adjust the level. Indication To do: Range BAS* 1 (bass) Adjust the bass. –06 (min.) to +06 (max.
23 ENGLISH General settings — PSM Basic procedure You can change PSM (Preferred Setting Mode) items listed in the table on page 24. 1 2 Select a PSM item. Ex.: If “TAG DISP” is selected 3 Adjust the PSM item selected. Ex.: If “TAG OFF” is selected 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary.
24 ENGLISH Indications Selectable settings, [reference page] DEMO Display demonstration DEMO ON : [Initial]; Display demonstration will be activated automatically if no operation is done for about 20 seconds, [9].
25 ENGLISH When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. Attaching the control panel Detaching the control panel EN22-27_KD-SV3105[U_UH]f.
26 ENGLISH External component operations Playing an external component You can connect an external component to the LINE IN plugs on the rear, and another to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied). • For connection, see Installation/Connection Manual (separate volume).
27 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
28 ENGLISH More about this unit Basic operations Turning on the power • By pressing SOURCE on the unit, you can also turn on the power. Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power.
29 ENGLISH • The On-Screen Display (OSD) will automatically canceled when you change the source or turn off the unit. Playing an MP3/WMA disc • While fast-forwarding or reversing on an MP3 or WMA disc, you can only hear intermittent sounds. • This unit can play back MP3/WMA files with the extension code <.
30 ENGLISH Symptoms Causes Remedies General • Sound cannot be heard from the speakers. The volume level is set to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • The unit does not work at all.
31 ENGLISH Symptoms Causes Remedies Disc playback • Track skips automatically and no sound can be heard. • Tracks are not encoded in an appropriate format. • Copy-protected WMA tracks cannot be played back. Skip to the next track. • No playback picture (VCD) appears on the monitor.
32 ENGLISH Symptoms Causes Remedies MP3/WMA playback • Elapsed playing time is not correct. This sometimes occurs during play. This is caused by how the tracks are recorded on the disc. • “NO FILES” appears on the display. The current disc does not contain any MP3/WMA tracks.
33 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.
© 2005 Victor Company of Japan, Limited EN, TH 0 4 05DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_KD-SV3105[U_UH]f.
KD-SV3105 Installation/Connection Manual °“√µ‘¥µ—Èß/§ŸË¡◊Õ°“√µ‘¥µ—Èß GET0262-004A [U/UH] 0305DTSMDTJEIN EN, TH ENGLISH This unit is designed to operate on 1 2 V D C, NEGA TI VE gr ound el ec trica l systems .
PRECAUTIONS on power supply and speaker connections: • DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit will be seriously damaged. • BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in your car.
3 ENGLISH ‰∑¬ A Typical Connections / °“√‡™◊ËÕ¡µËÕ·∫∫ª°µ Bef ore co nne cting : Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color.
4 Connecting the monitor / °“√µËÕ®Õ¿“æ D E Connecting the external amplifier / °“√µËÕ‡æ‘Ë¡‡µ‘¡‡¢È“°—∫Õÿª°√≥ÏÕ◊Ëπ You can connect amplifier to upgrade your car stereo system.
An important point after buying a device JVC KD-SV3105 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC KD-SV3105 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC KD-SV3105 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC KD-SV3105 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC KD-SV3105 will certainly help you make a decision on the purchase.
If you already are a holder of JVC KD-SV3105, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC KD-SV3105.
However, one of the most important roles played by the user manual is to help in solving problems with JVC KD-SV3105. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC KD-SV3105 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
