Instruction/ maintenance manual of the product KD-SH9700 JVC
Go to page of 69
L VT1004-001A [J/C] ENGLISH ESP AÑOL FRANÇAIS CD RECEIVER KD-SH9750/KD-SH9700 INSTR UCTIONS MANU AL DE INSTRUCCIONES MANUEL D ’ INSTR UCTIONS RECEPT OR CON CD KD-SH9750/KD-SH9700 RECEPTEUR CD KD-SH9750/KD-SH9700 For customer Use: Enter below the Model No.
2 ENGLISH INFORMA TION (For U .S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
3 ENGLISH CONTENTS Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. How to reset your unit ...............
4 ENGLISH LOCA TION OF THE BUTTONS Control panel 1 SRC (source) button 2 DISP (D) (display) button 3 5 (up) button 4 4 / ¢ buttons 5 Display window 6 • 0 (eject) button • (angle) button 7 BBE but.
5 ENGLISH Remote controller 1 • T urns on the unit if pressed when the unit is turned off. • T urns off the unit if pressed and held for a few seconds. • Drops the volume level in a moment if pressed briefly . Press again to resume the volume. 2 Changes the angle of the control panel to four positions.
6 ENGLISH Preparing the remote controller Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).
7 ENGLISH BASIC OPERA TIONS T urning on the power 1 T urn on the power . Note on One-T ouch Operation: When you select a sour ce in step 2 below , the power automatically comes on. Y ou do not have to pr ess this button to turn on the power . 2 Select the source.
8 ENGLISH Canceling the display demonstration When shipped from the factory , display demonstration has been activated, and starts automatically when no operations are done for about 20 seconds. • It is recommended to cancel the demonstration before you use the unit for the first time.
9 ENGLISH 5 Set the cloc k system. 1 Select “24H/12H.” 2 Adjust “24Hours” or “12Hours.” 6 Finish the setting. T o chec k the current cloc k time when the unit is turned off, press DISP (D). The power turns on and the clock time is shown for about 5 seconds, then the power turns of f.
10 ENGLISH RADIO OPERA TIONS Listening to the radio Y ou can use either automatic searching or manual searching to tune in to a particular station. Searching a station automatically: Auto search 1 Select the band (FM1 – 3, AM). 1 Press SRC (source) repeatedly to select the tuner .
11 ENGLISH Searching a station manually: Manual search 1 Select the band (FM1 – 3, AM). 1 Press SRC (source) repeatedly to select the tuner . 2 Press and hold SRC for more than 1 second. 3 Within about 5 seconds, press SRC again. Each time you press the button, the band changes.
12 ENGLISH Storing stations in memor y Y ou can use one of the following two methods to store broadcasting stations in memory . • Automatic preset of FM stations: SSM (Strong- station Sequential Mem.
13 ENGLISH Manual preset Y ou can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually . Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band. 1 Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).
14 ENGLISH Changing the display pattern By pressing DISP (D), you can change the information shown on the display . Each time you press the button, the display patterns change as follows: • Initial .
15 ENGLISH CD OPERA TIONS Playing a disc 1 Open the control panel. 2 Insert a disc into the loading slot. The unit draws the disc, the control panel goes back to the previous position (see page 45), and playback starts automatically . All tracks will be played repeatedly until you stop playback.
16 ENGLISH • Display indications when inserting an MP3 or a WMA disc 1 T otal folder number 2 T otal track number 3 Disc type—MP3 or WMA 4 Album name/performer (or folder name when “T ag” is s.
17 ENGLISH Press ¢ briefly , while playing a disc, to go ahead to the beginning of the next track. Each time you press the button consecutively , the beginning of the next tracks is located and played back. Press 4 briefly , while playing a disc, to go back to the beginning of the current track.
18 ENGLISH T rack 6 10 20 30 31 32 (Three times) (T wice) T rack 36 30 20 10 9 8 (Three times) (T wice) M MODE M MODE How to go to the desired trac k quickly • Ex.
19 ENGLISH 3456 2 1 Locating a folder on a disc The follo wing operations are only possible when pla ying an MP3 or a WMA disc. T o go to a folder directly IMPORT ANT: T o directly select the folders using the number button(s), it is required that folders are assigned 2 digit numbers at the beginning of their folder names.
20 ENGLISH T o skip to the next or previous folder within a folder (on the same hierarchy level) ONL Y on the remote controller: See the hierarchy diagram on page 15.
21 ENGLISH Folder name list T rack name list 3456 2 1 3456 2 1 T o select a track and star t playback 1 Press and hold 5 (up) or ∞ (down) so that the folder name list of the inser ted disc appears on the displa y . The currently playing folder will be highlighted on the display .
22 ENGLISH Selecting playback modes T o play back tracks at random (Random Play) Y ou can play back tracks on a disc (or in a folder for MP3 and WMA discs) at random. 1 Press MODE (M) while playing a disc. “ Mode ” appears on the display , then the number buttons and the 5 (up)/ ∞ (down) buttons start flashing.
23 ENGLISH For audio CD and CD Te xt discs: For MP3 and WMA discs: Mode Plays repeatedl y Repeat T rack : Current (or specified) track. • While playing, lights up on the display Repeat Folder * : All tracks of the current (or specified) folder .
24 ENGLISH D DISP While playing an MP3 or a WMA disc: • Initial displa y • Album name/perf ormer or folder name is emphasized: • T rack title or trac k name is emphasized: • Clock time is emphasized: Notes: * 1 If “T a g” is set to “Off” (see pag e 41), folder name appear with .
25 ENGLISH DSP OPERA TIONS SEL DSP Canceled iEQ SEL 1 Press SEL (select) once to show the DSP mode selection screen. The last selected DSP mode screen appears. • If you press the button twice or more, the unit enters different sound adjustment modes.
26 ENGLISH T o make further precise settings for the DSP modes Y ou can also make further precise settings to make the best sound field in your car compartment.
27 ENGLISH 2 Press number b utton 6 to enter the further precise setting screen. 3 Select y our listening seats position. • Press number b utton 1 to select “ LEFT (front left) ” seat. • Press number b utton 2 to select “ RIGHT (front right) ” seat.
28 ENGLISH EQUALIZER OPERA TIONS Selecting preset sound modes (iEQ: intelligent equalizer) Y ou can select a preset sound mode (iEQ: intelligent equalizer) suitable to the music genre.
29 ENGLISH Buttons used for adjustments Storing your own sound modes Y ou can adjust the sound modes to your preference and store your own adjustments in memory (USER 1, USER 2 and USER 3). 1 Press SEL (select) twice to show the sound mode selection screen.
30 ENGLISH SOUND ADJUSTMENTS Performing the basic sound settings Y ou can set the speaker output balance, subwoofer output level, and input level of each source. • There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
31 ENGLISH Making sounds natural —BBE Digital BBE Digital * is a new digital processing method to restore the brilliance and clarity of the original live sound in recording, broadcasts, etc.
32 ENGLISH GRAPHIC DISPLA YS What is Image Converter Image Converter is a JVC’ s original software to produce a custom image to show on your JVC Car Audio.
33 ENGLISH M MODE CONTINUED ON THE NEXT P AGE 1 Open the control panel. 2 Insert a CD-ROM with the files (images and animations) into the loading slot. The unit draws the disc, the control panel goes back to the previous position (see page 45) • If the disc includes playable audio files such as MP3 tracks, playback starts automatically .
34 ENGLISH Notes: • On this list, the folders including the tar get files—<jml> f iles for “Picture” and <jma> files for the other s—are shown. • The display can show only six names at a time. Y ou can show the other names on the ne xt lists by pr essing 5 (up) or ∞ (down).
35 ENGLISH 3456 2 1 The file name appears, and the unit will ask you “ Download OK? ” Deleting unwanted files • When “ BACK ” is shown on the display above number button 5, you can go back to the previous screen by pressing number button 5. T o delete all the stored files at a time 1 Press MODE (M) while playing any source.
36 ENGLISH T o delete the files stored for “PowerOn,” “PowerOff,” “Picture (all stored images at a time),” and “Movie” 1 Press MODE (M) while playing any source. “ Mode ” appears on the display , and the number buttons and 5 (up)/ ∞ (down) buttons start flashing.
37 ENGLISH 3456 2 1 Ex. When you select “ Opening ” SEL AT T SEL CONTINUED ON THE NEXT P AGE SEL 3 Select “ Opening ” (opening screen setting) or “ Ending ” (ending screen setting). 4 Select “ User . ” • Default: Factory-preset animation is used.
38 ENGLISH T o select a still image for graphic display—User Picture Y ou cannot select “ UserPict. ” as a PSM item in the following cases: • If no image is stored in “ Picture, ” or •“ UserPict ” is not selected for the “ Graphics ” setting (see the left column).
39 ENGLISH Changing the general settings (PSM) Y ou can change the items listed on the table on the next page by using the PSM (Preferred Setting Mode) control. • The PSM items are grouped into five categories—MOVIE, CLOCK, DISP (display), TUNER, and AUDIO.
40 ENGLISH * 1 Displayed only after a downlaodable file is stor ed in memory . * 2 Displayed only after a downlaodable file is stor ed in memory and while selecting “UserPict. ” for “Graphics. ” * 3 Displayed only when “Dimmer” is set to “T ime Set.
41 ENGLISH T o show the graphics on the display— Graphics Y ou can change the graphics shown on the display . These graphics appear if no operation is done for about 20 seconds (except for “ ImageLink ” ). • All Demo: Display demonstration (animation) appears (see page 8).
42 ENGLISH Notes: • If you change the setting fr om “Off” to “On” while playing a track, the ta g display will be activated when the next trac k starts playing. • F or MP3 tracks only: Ther e are two ver sions–ID3v1 (ID3 T ag version 1) and ID3v2 (ID3 T ag version 2).
43 ENGLISH Selecting the dimmer mode Y ou can dim the display at night automatically or as you set the timer . When shipped from the factory , Auto Dimmer mode is activated. Note: Auto Dimmer equipped with this unit may not work correctly on some v ehic les, particularly on those having a contr ol dial for dimming.
44 ENGLISH 3 Select the character set y ou want while the first c haracter position is flashing. Each time you press the button, the character set changes as follows: 4 Select a character . • About the available characters, see page 55. 5 Mo ve the cursor to the ne xt (or previous) c haracter position.
45 ENGLISH Changing the control panel angle Y ou can change the angle of the control panel to four positions. 1 Press and hold 0 ( ) until the angle adjustment screen appears. The 5 (up) and ∞ (down) buttons start flashing to teach you that they can be used for the next operational steps.
46 ENGLISH Detaching the control panel Y ou can detach the control panel when leaving the car . When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder . Detaching the control panel Before detaching the control panel, be sure to turn off the power .
47 ENGLISH CD CHANGER OPERA TIONS We recommend that you use the JVC MP3- compatible CD changer with your unit. By using this CD changer , you can play back your original CD-Rs (Recordable) and CD-RWs (Rewritable) recorded either in audio CD format or in MP3 format.
48 ENGLISH T o go to a particular disc directly Press the number button corresponding to the disc number to start its playback (while the CD changer is playing). • T o select a disc number from 1 – 6: Press 1 (7) – 6 (12) briefly . • T o select a disc number from 7 – 12: Press and hold 1 (7) – 6 (12) for more than 1 second.
49 ENGLISH T o go to a track quickly This operation is only possible when using JVC MP3-compatible CD changer CH-X1500. 1 Press MODE (M) while playing a disc. “ Mode ” appears on the display , and the number buttons and 5 (up)/ ∞ (down) buttons start flashing.
50 ENGLISH Locating a folder on a disc The f ollowing operations are only possib le when pla ying an MP3 disc using a JVC MP3- compatible CD c hanger , CH-X1500.
51 ENGLISH Selecting a disc/folder/track using the name lists T o select a disc using the disc lists If you forget what discs are loaded in the CD changer , you can show the disc name list and select a disc in the list shown on the display . • The display can show only six names at a time.
52 ENGLISH Selecting playback modes T o play back tracks at random (Random Play) Y ou can play back tracks on a disc, on all loaded discs (or in a folder for MP3 discs) at random. 1 Press MODE (M) while playing a disc. “ Mode ” appears on the display , then the number buttons and the 5 (up)/ ∞ (down) buttons start flashing.
53 ENGLISH T o play back tracks repeatedly (Repeat Play) Y ou can play back a track, a disc (or a folder for MP3 discs) repeatedly . 1 Press MODE (M) while playing a disc. “ Mode ” appears on the display , then the number buttons and the 5 (up)/ ∞ (down) buttons start flashing.
54 ENGLISH EXTERNAL COMPONENT OPERA TIONS SRC AT T 3456 M 2 1 D SRC DISP ATT SEL BBE MODE 1 Select the external component (LINE IN). Each time you press the button, the source changes as described on page 7. When you select a source, the power automatically comes on.
55 ENGLISH ADDITIONAL INFORMA TION Sound modes (preset frequency level settings) The list below shows the preset frequency level settings for each sound mode. • Y ou can adjust the preset sound modes temporarily . However, your temporary adjustments will be reset when you select another sound mode.
56 ENGLISH What appears to be trouble is not always serious. Check the following points before calling a service center . TROUBLESHOOTING Remedies Stop playback while driving on rough roads. Change the disc. Check the cords and connections. Set it to “ On ” (see page 42).
57 ENGLISH MP3/WMA Playbac k CD Changer Causes Y ou are trying to download an animation of many frames. T emperature in the car compartment is very low— (LOW TEMP .) indicator appears. No disc in the magazine. This unit is not connected to a CD changer correctly .
58 ENGLISH MAINTENANCE Center holder Handling discs This unit has been designed to reproduce CDs, CD-Rs (Recordable), CD-RWs (Rewritable), and CD T exts.
59 ENGLISH SPECIFICA TIONS CD PLA YER SECTION T ype: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz Dynamic Range: 98 dB Signal-to-Noise Ratio: 102 dB Wow and Flutter: Less than measurable limit MP3 (MPEG Audio Layer 3) Max.
0203MNMMDWJEIN J V C EN, SP , FR © 2003 VICTOR COMP ANY OF JAP AN, LIMITED VICTOR COMPANY OF JAPAN, LIMITED Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONL Y Call 1-800-252-5722 http://www .
53 mm 184 mm (7-1/4") (2-1/8") KD-SH9750 KD-SH9700 Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement ESP AÑOL • Esta unidad está diseñada para funcionar con 12 V de CC, con sistemas eléctricos de masa NEGA TIV A.
2 • When installing the unit without using the sleeve • Instalación de la unidad sin utilizar la cubier ta • Lors de l’installation de l’appareil sans utiliser de manchon In a T oyota for example, first remove the car radio and install the unit in its place.
3 15 2 1 7 6 5 (ILLUMINATION) 3 3 4 2 1 A T ypical Connections / Conexiones típicas / Raccordements typiques Before connecting: Check the wiring in the vehicle carefully not to fail in connecting this unit. Incorrect connection may cause a serious damage to this unit.
4 INPUT R L LINE OUT (REAR) L R L R R L R L R L LINE OUT (FRONT) *3 *3 R L L L RR Usted podrá conectar un subwoofer a través de un amplificador para reforzar los graves. • Con respecto a sus conexiones, r efiérase a las instrucciones suministradas con sus subwoofer .
L VT1046-001A [J/C] 0203MNMMDWJEIN EN, SP , FR ESP AÑOL Una guía sobre MP3/WMA FRANÇAIS Un guide du format MP3/WMA What are MP3/WMA? MP3 (MPEG A udio La yer 3) is one of digital audio compression standards. • This pla yer cannot pla y back MP3i and MP3 PR O formats.
Questions and Answers An MP3/WMA disc requires a long readout time…? When an MP3/WMA disc is inser ted, inf or mation inside the disc (number of f olders and files, and positions of data) is first read.
IMPOR T ANT Notice the following information will help you to solve your problems. Keep this IMPORT ANT sheet together with the INSTRUCTIONS. • After installing the unit = Follow the procedure Å described below . • If the unit does not operate = Follow the procedure Å described below .
Addendum/Addenda/Addenda English Page 37 Activating the downloaded images and animations T o activate the animations stored for opening and ending screens • Opening and ending screens will not be shown if the “KeyIn CFM” setting is set to “Short” or “Off.
Canceling the display demonstration / Cancelación de la demostración en pantalla / Annulation de la démonstration des affichages / Abbrechen der Display-Demonstration / Annuleren van de displaydemo.
An important point after buying a device JVC KD-SH9700 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC KD-SH9700 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC KD-SH9700 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC KD-SH9700 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC KD-SH9700 will certainly help you make a decision on the purchase.
If you already are a holder of JVC KD-SH9700, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC KD-SH9700.
However, one of the most important roles played by the user manual is to help in solving problems with JVC KD-SH9700. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC KD-SH9700 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
