Instruction/ maintenance manual of the product KD-S680 JVC
Go to page of 27
ENGLISH INSTR UCTIONS MANU AL DE INSTR UCCIONES MANUEL D’INSTRUCTIONS GET0058-001A [J] ESP AÑOL FRANÇAIS For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this information for future reference.
2 ENGLISH How to reset your unit Press and hold both the SEL (Select) and (Standby/On/A TT) b uttons at the same time for se ver al seconds. This will reset the built-in microcomputer . NOTES: Y our preset adjustments — such as preset channels or sound adjustments — will also be erased.
3 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS BEFORE USE * For safety .... • Do not raise the volume level too much, as this will block outside sounds, making driving danger ous.
4 ENGLISH e y t r i u w q 5 6 4 3 1 2 7 8 9 p o a g d ; s f h j k l LOCA TION OF THE BUTTONS Control panel Display window 1 (standby/on/attenuator) b utton 2 Control dial 3 LOUD (loudness) button 4 DI.
5 ENGLISH 1 2 3 4 6 7 5 RM-RK31 3 • Functions as the PRESET button while listening to the radio. Each time you press the b utton, the preset station number increases, and the selected station is tuned into . • Does not function as the DISC – b utton.
6 ENGLISH Preparing the remote controller Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).
7 ENGLISH BASIC OPERA TIONS 4 Adjust the sound as you want (see pages 14 – 16). T o drop the volume in a moment Press briefly while listening to any source. “A TT” star ts flashing on the display , and the volume level will drop in a moment. T o resume the previous v olume level, press the button briefly again.
8 ENGLISH RADIO BASIC OPERA TIONS T o stop searching bef ore a station is received, press the same button you have pressed for searching. Searching a station manually: Manual search 1 Select the band (FM1 – 3, AM). Note: This r eceiver has three FM bands (FM1, FM2, FM3).
9 ENGLISH 3 T une into a station you want while “ M ” is flashing. • If you release your finger from the button, the manual mode will automatically turn off after 5 seconds.
10 ENGLISH Manual preset Y ou can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually . Ex: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band 1 Select the band (FM1 – 3, AM) you want to store FM stations into (in this example, FM1).
11 ENGLISH Playing a CD 1 Insert a disc into the loading slot. The unit turns on, draws a CD and starts playbac k automatically . Note: • When a CD is inserted upside down, the CD automatically ejects. CD OPERA TIONS T o stop play and eject the CD Press 0 .
12 ENGLISH Selecting CD playback modes T o play back tracks at random (Random Play) Y ou can pla y back all trac ks on the CD at random. Each time you press MO RND (monaural/random) while playing a CD, CD random play mode turns on and off alternately .
13 ENGLISH Prohibiting CD ejection Y ou can prohibit CD ejection and can loc k a CD in the loading slot. Press and hold CD and 0 for more than 2 seconds. “EJECT” flashes on the display for about 5 seconds, and the CD is locked and cannot be ejected.
14 ENGLISH SOUND ADJUSTMENTS Adjusting the sound Y ou can adjust the sound characteristics to your preference. 1 Select the item you want to adjust. Each time you press the button, the adjustable items change as follows: Indication T o do: Range BAS Adjust the bass.
15 ENGLISH • When “ SCM LINK ” is set to “ LINK ON ” , the selected sound mode can be stored in memory for the current source and the eff ect applies only to the current source. • When “ SCM LINK ” is set to “ LINK OFF ” , the selected sound mode effect applies to an y source.
16 ENGLISH Storing your own sound adjustments Y ou can adjust the sound modes (BEA T , SOFT , POP) to your preference and store your own adjustments in memor y . • There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
17 ENGLISH OTHER MAIN FUNCTIONS Setting the clock 1 Press and hold SEL (select) for more than 2 seconds. “CLOCK H”, “CLOCK M”, “SCM LINK” or “LEVEL ” appears on the display . 2 Set the hour . 1 Select “CLOCK H” if not shown on the display .
18 ENGLISH Selecting the level display Y ou can select the le vel displa y according to your preference. When shipped from the factory , “A UDIO 2” is selected. A UDIO 1: Lev el meter illuminates from bottom to top. A UDIO 2: Alter nates lev el meter (mov es from bottom to top) and illumination display .
19 ENGLISH Detaching the control panel Y ou can detach the control panel when lea ving the car . When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder . How to detach the control panel Before detaching the control panel, be sure to turn off the power .
20 ENGLISH MAINTENANCE Handling CDs This unit has been designed only to reproduce the CDs bearing the following marks. Y ou can also pla y back y our original CD-Rs (Recordable) and CD-R Ws (Rewritable) on this receiver . This unit is not compatible with MP3.
21 ENGLISH TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center . Symptoms • CD cannot be played back. • CD sound is sometimes interrupted. • Sound cannot be heard from the speakers.
22 ENGLISH SPECIFICA TIONS AUDIO AMPLIFIER SECTION Maximum Power Output: F ront: 45 W per channel Rear : 45 W per channel Continuous Power Output (RMS): F ront: 17 W per channel into 4 Ω , 40 to 20 000 Hz at no more than 0.8% total harmonic distor tion.
1001KKSFLEJEIN EN, SP , FR J V C VICTOR COMPANY OF JAPAN, LIMITED Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONL Y Call 1-800-252-5722 http://www .jvcser vice .com W e can help y ou! http://www .
KD-S7250/KD-S700/ KD-S680 Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement ESP AÑOL • Esta unidad está diseñada para funcionar con 12 V de CC, con sistemas eléctricos de masa NEGA TIV A.
• When installing the unit without using the sleeve • Instalación de la unidad sin utilizar la cubier ta • Lors de l'installation de l’appareil sans utiliser de manchon In a T oy ota for e xample, first remov e the car radio and install the unit in its place.
ENGLISH ELECTRICAL CONNECTIONS T o pre vent short circuits, we recommend that you disconnect the batter y ’ s negative terminal and make all electrical connections before installing the unit. If you are not sure how to install this unit correctly , hav e it installed by a qualified technician.
PRECAUTIONS on power supply and speaker connections: • DO NO T connect the speaker leads of the power cor d to the car battery; otherwise, the unit will be seriousl y damaged. • Connect the blac k lead (ground), yello w lead (to car batter y , constant 12V), and red lead (to an accessor y terminal) correctly .
An important point after buying a device JVC KD-S680 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC KD-S680 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC KD-S680 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC KD-S680 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC KD-S680 will certainly help you make a decision on the purchase.
If you already are a holder of JVC KD-S680, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC KD-S680.
However, one of the most important roles played by the user manual is to help in solving problems with JVC KD-S680. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC KD-S680 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
