Instruction/ maintenance manual of the product KD-LX111 JVC
Go to page of 32
ENGLISH PIM171000 [J] ESP AÑOL FRANÇAIS CD RECEIVER KD-LX333/KD-LX1 1 1 RECEPT OR CON CD KD-LX333/KD-LX1 1 1 RECEPTEUR CD KD-LX333/KD-LX1 1 1 INSTR UCTIONS MANU AL DE INSTR UCCIONES MANUEL D’INSTR UCTIONS For customer Use: Enter below the Model No .
2 ENGLISH INFORMA TION (For U.S.A.) This equipment has been tested and found to comply with the limits f or a Class B digital device , pursuant to P ar t 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
3 ENGLISH Thank you f or purchasing a JVC product. Please read all instr uctions carefully bef ore operation, to ensure your complete understanding and to obtain the best possib le performance from the unit. CONTENTS How to reset y our unit ..........
4 ENGLISH LOCA TION OF THE BUTTONS * The contr ol panel slides out when you pr ess ON CLOSE. * When you pr ess OFF 0 , the display panel moves down and the CD loading slot appears. 9 BAND MODE (M) button • Also functions as SSM buttons when pressed tog ether with the DISP (D) button.
5 ENGLISH 3 • Functions as the PRESET b utton while listening to the radio . Each time you press the b utton, the preset station number increases , and the selected station is tuned in. • Functions as the DISC – button while listening to the CD changer .
6 ENGLISH 3 . Return the battery holder . Insert again the batter y holder pushing it until you hear a clic king sound. WARNING: • Stor e the battery in a place where c hildren cannot r each. If a child accidentally swallo ws the ba ttery , consult a doctor immediately .
7 ENGLISH 3 Adjust the volume. 4 Adjust the sound as you want (see pages 15 – 17). T o drop the volume in a moment Press SOURCE A TT f or more than 1 second while listening to any source . “A TT” rotates on the displa y , and the volume le vel will drop in a moment.
8 ENGLISH Setting the clock 1 Press and hold SEL (S) for more than 2 seconds so that one of the PSM items appears on the display . (See page 19.) 2 Set the hour . 1 Select “CLOCK HOUR” if not shown on the displa y . 2 Adjust the hour . 3 Set the minute.
9 ENGLISH Listening to the radio Y ou can use either automatic searching or manual searching to tune in to a particular station. Searching a station automatically: Auto search 1 Select the band. 1 Press SOURCE A TT to select FM or AM as the source. 2 If necessary , press and hold BAND MODE (M) to select the FM band number (FM1, FM2 or FM3).
10 ENGLISH Storing stations in memor y Y ou can use one of the follo wing two methods to store broadcasting stations in memory . • Automatic preset of FM stations: SSM (Strong- station Sequential Me.
11 ENGLISH Manual preset Y ou can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually . Ex.: Stor ing an FM station of 88.3 MHz into the preset number 1 of the FM1 band 1 Select the band (in this example, FM1). 1 Press SOURCE A TT to select FM as the source.
12 ENGLISH Notes: • When a CD is in the loading slot, selecting “CD” as the sour ce by pressing SOURCE ATT to starts CD play . • When a CD is inserted upside down, the CD automatically ejects. • When you play a CD T ext, the disc title and performer appear on the display .
13 ENGLISH Locating a track or a particular portion on a CD T o fast-for ward or reverse the track T o go to the next tracks or the previous tracks T o go to a particular track directly Press the number button corresponding to the trac k number to star t its pla yback.
14 ENGLISH Playing a CD T ext In a CD T e xt, some information about the disc (its disc title, perf or mer and trac k title) is recorded. Y ou can show these disc inf or mation on the displa y .
15 ENGLISH Adjusting the sound Y ou can adjust the sound characteristics to your preference . 1 Select the item you want to adjust. Each time y ou press the button, the adjustab le items change as f ollows: Indication T o do: Range BASS Adjust the bass.
16 ENGLISH Selecting preset sound modes (CEQ: custom equalizer) Y ou can select a preset sound mode (CEQ: custom equalizer) suitab le to the music genre. 1 Press BAND MODE (M) to make the number buttons work as different function buttons. 2 Activate custom equalizer (CEQ).
17 ENGLISH 4 Select the items you want to adjust. • See page 15 f or details. 5 Adjust the level. 6 Repeat steps 4 and 5 to adjust the other items. • T o adjust the BBE II lev el, see page 15. 7 Repeat the same procedure to store other sound modes.
18 ENGLISH Changing the general settings (PSM) Y ou can change the items listed on the next page by using the PSM (Pref erred Setting Mode) control. Basic Procedure 1 Press and hold SEL (S) for more than 2 seconds so that one of the PSM items appears on the display .
19 ENGLISH Preferred Setting Mode (PSM) items 1 3 2 SEL S Set... Counter- clockwise Cloc kwise Select... Hold. 8 Back Adv ance Back Adv ance DEMO OFF DEMO ON DEMO ON 8 NORMAL 20 5 types (see page 20) .
20 ENGLISH T o set Custom Equalizer Link — CEQ LINK A different sound mode (CEQ) can be stored in memory for each source so that you can change the sound modes simply by changing the sources. When shipped from the f actor y , this mode is deactiv ated.
21 ENGLISH T o select the subwoofer cutoff frequency — WooferFreq (only for KD-LX333) When a subwoof er is connected to this unit, select an appropriate cutoff frequency lev el f or your subwoof er. When shipped from the f actor y , the subwoof er cutoff frequency is set to “FREQ MID .
22 ENGLISH Controlling the volume automatically (Audio Cruise) Y ou can select the proper cruise mode for your car . This unit changes the volume le vel automatically (at 3 possible le vels) based on the driving speed of your car b y detecting the alter nator’s generating frequency (A udio Cr uise).
23 ENGLISH Assigning names to the sources Y ou can assign names to station frequencies, CDs and the e xternal component. After assigning a name, it will appear on the displa y when you select the source.
24 ENGLISH T o erase the input characters Inser t spaces using the same procedure described abov e. Available characters Capital letters Small letters Numbers and symbols Notes: • When you try to assign a name to the 41st disc, “N AME FULL” appears on the display .
25 ENGLISH CD CHANGER OPERA TIONS We recommend that y ou use one of the CH-X series with your unit. If you ha ve another CD automatic changer , consult your JVC car audio dealer f or connections. • F or example, if your CD automa tic changer is one of the KD-MK series, you need a cor d (KS-U15K) for connecting it to this unit.
26 ENGLISH T o go to a particular disc directly Press the number button corresponding to the disc number to star t its pla yback (while the CD changer is playing). • T o select a disc number from 1 – 6: Press 1 (7) – 6 (12) briefly . • T o select a disc number from 7 – 12: Press and hold 1 (7) – 6 (12) for more than 1 second.
27 ENGLISH T o play back tracks repeatedly (Repeat Play) 1 Press BAND MODE (M) while playing a CD . “MODE” appears on the displa y . 2 Press RPT (repeat), while “MODE” is still on the display , so that the RPT indicator lights up on the display .
28 ENGLISH Playing an external component When connecting an e xternal component, you can select the component as the sound source. Notes for KD-LX333: • F or the external component connection, see the Installation/Connection Manual (separate volume).
29 ENGLISH What appears to be trouble is not alw ays serious . Check the f ollowing points bef ore calling a ser vice centre. TROUBLESHOOTING Remedies Inser t the CD correctly . Stop CD pla y while dr iving on rough roads. Change the CD . Check the cords and connections.
30 ENGLISH Handling CDs This unit has been designed to reproduce the CDs bearing the following marks. Y ou can play bac k your original CD-Rs (Recordable) and CD-R Ws (Rewritable) on this receiver .
31 ENGLISH AUDIO AMPLIFIER SECTION Maximum P ower Output: F ront: 50 W per channel Rear: 50 W per channel Continuous P ower Output (RMS): F ront: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distor tion. Rear: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.
EN, SP , FR J V C VICTOR COMPANY OF JAPAN, LIMITED Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONL Y Call 1-800-252-5722 http://www .jvc.com W e can help you! http://www . j v cmobil e.
An important point after buying a device JVC KD-LX111 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC KD-LX111 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC KD-LX111 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC KD-LX111 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC KD-LX111 will certainly help you make a decision on the purchase.
If you already are a holder of JVC KD-LX111, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC KD-LX111.
However, one of the most important roles played by the user manual is to help in solving problems with JVC KD-LX111. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC KD-LX111 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
