Instruction/ maintenance manual of the product KD-G417 JVC
Go to page of 32
ENGLISH Р УCCKИЙ CD RECEIVER РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ KD-G417/KD-G317 For installation and connections, refer to the separate manual. Указания по установке и выполнению соединений приводятся в отдельной инст рукции.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
3 ENGLISH How to reset your unit ........................... 2 How to forcibly eject a disc ................... 2 How to read this manual ........................ 4 How to use the MODE button ............... 4 Control panel — KD-G417/KD-G317 .......
4 ENGLISH How to read this manual The following methods are used to make the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this receiver” (see page 25).
5 ENGLISH Control panel — KD-G417/KD-G317 Parts identification 1 +/– buttons 2 DISP (display) button 3 Loading slot 4 Display window 5 MODE button 6 0 (eject) button 7 ¢ / 4 buttons 8 (standby/on/attenuator) button 9 SEL (select) button p Remote sensor • You can control this receiver with an optionally purchased remote controller.
6 ENGLISH Getting started Basic operations ~ Ÿ You cannot select “CD” as the playback source if there is no disc in the loading slot. ! Volume level appears. Volume level indicator ⁄ Adjust the sound as you want. (See pages 18 and 19.) To drop the volume in a moment (ATT) To restore the sound, press it again.
7 ENGLISH Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 20. 1 2 3 4 Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock 1 2 Set the hour and minute.
8 ENGLISH Radio operations Listening to the radio ~ Lights up when receiving an FM stereo broadcast with sufficient signal strength. Selected band appears. Ÿ Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again.
9 ENGLISH Storing stations in memory You can preset six stations for each band. FM station automatic presetting — SSM (Strong-station Sequential Memory) 1 Select the FM band (FM1 – FM3) you want to store into. 2 3 “SSM” flashes, then disappears when automatic presetting is over.
10 ENGLISH Manual presetting Ex.: Storing FM station of 92.5 MHz into the preset number 4 of the FM1 band. 1 2 3 Preset number flashes for a while. Listening to a preset station 1 2 Select the preset station (1 – 6) you want. To check the current clock time while listening to an FM (non-RDS) or AM station • For FM RDS stations, see page 13.
11 ENGLISH FM RDS operations Searching for your favorite FM RDS programme You can tune in to a station broadcasting your favorite programme by searching for a PTY code. ~ The last selected PTY code appears. Ÿ Select one of your favorite programme type.
12 ENGLISH What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals.
13 ENGLISH Tracking the same programme— Network-Tracking Reception When driving in an area where FM reception is not sufficient enough, this receiver automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals (see the illustration below).
14 ENGLISH Disc operations Playing a disc About MP3 and WMA discs MP3 and WMA (Windows Media ® Audio) “tracks” (words “file” and “track” are used interchangeably) are recorded in “folders.” • When inserting an MP3 or a WMA disc: * Either the MP3 or WMA indicator lights up depending on the detected file.
15 ENGLISH To locate a particular track (for CD) or folder (for MP3 or WMA discs) directly To select a number from 01 – 06: To select a number from 07 – 12: • To use folder search on MP3/WMA discs, it is required that folders are assigned with 2-digits number at the beginning of their folder names—01, 02, 03, and so on.
16 ENGLISH Changing the display information While playing an audio CD or a CD Text * 1 If the current disc is an audio CD, “NO NAME” appears. While playing an MP3 or WMA disc • When “TAG DISP” is set to “TAG ON” (see page 21) * 2 If an MP3/WMA file does not have ID3 tags, folder name and file name appear.
17 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Ex.: When “TRK RPT” is selected while playing an MP3 disc Mode Plays repeatedly TRK RP T : The current track.
18 ENGLISH Sound adjustments Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode suitable to the music genre. ~ Ÿ Ex.
19 ENGLISH Adjusting the sound You can adjust the sound characteristics to your preference. 1 Ex.: When “TRE” is selected 2 Indication pattern changes as you adjust the level. Indication To do: Range BAS* 1 (bass) Adjust the bass. –06 (min.) to +06 (max.
20 ENGLISH Indications Selectable settings, [reference page] DEMO Display demonstration DEMO ON : [Initial]; Display demonstration will be activated automatically if no operation is done for about 20 seconds, [7].
21 ENGLISH Indications Selectable settings, [reference page] AF- REG Alternative frequency/ regionalization reception When the received signals from the current station become weak... AF: [Initial]; Switches to another station (the programme may differ from the one currently received), [13].
22 ENGLISH When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. Attaching the control panel Detaching the control panel EN18-23KD-G417_G317[EE]f.
23 ENGLISH Main elements and features 1 (standby/on attenuator) button • Turns on and off the power and also attenuates the sound. 2 SRC (source) button • Selects the source. 3 R (reverse) / F (forward) buttons • Searches for stations if pressed briefly.
24 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
25 ENGLISH More about this receiver Basic operations Turning on the power • By pressing CD or FM/AM on the receiver, you can also turn on the power. Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power.
26 ENGLISH Playing an MP3/WMA disc • This receiver can play back MP3/WMA files with the extension code <.mp3> or <.wma> (regardless of the letter case—upper/lower). • This receiver can show the names of albums, artists (performer), and ID3 Tag (Version 1.
27 ENGLISH Symptoms Causes Remedies General • Sound cannot be heard from the speakers. The volume level is set to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • The receiver does not work at all.
28 ENGLISH Symptoms Causes Remedies MP3/WMA playback • Disc cannot be played back. No MP3/WMA tracks are recorded on the disc. Change the disc. MP3/WMA tracks do not have the extension code <.mp3> or <.wma> in their file names. Add the extension code <.
29 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.
© 2005 Victor Company of Japan, Limited EN, RU 0405DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Затруднения при эксплу.
KD-G417/KD-G317 Installation/Connection Manual Ру к ов од ств о по у с тановк е / подк лючению GET0261-002B [EE] 0405DTSMDTJEIN EN, RU ENGLISH This receiver is designed to operate on 12 V D C , N EGA T IVE gr oun d el ec tric al sys te ms .
ELECTRICAL CONNECTIONS To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical connections before installing the receiver. • Be sure to gr ou nd th is r ec eive r to th e c ar ’ s c has si s aga in af t er in st all at ion .
An important point after buying a device JVC KD-G417 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC KD-G417 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC KD-G417 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC KD-G417 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC KD-G417 will certainly help you make a decision on the purchase.
If you already are a holder of JVC KD-G417, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC KD-G417.
However, one of the most important roles played by the user manual is to help in solving problems with JVC KD-G417. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC KD-G417 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
