Instruction/ maintenance manual of the product KD-G162 JVC
Go to page of 18
CD RECEIVER KD-G162/KD-G161 For installation and connections, refer to the separate manual. INSTRUCTIONS GET0334-003A [EX/EU] For canceling the display demonstration, see page 5.
2 ENGLISH How to detach/attach the control panel Detaching... Attaching... Note: Only for [EX] model users in UK and European countries For security reasons, a numbered ID card is provided with this unit, and the same ID number is imprinted on the unit’s chassis.
ENGLISH 3 How to read this manual • Button operations are mainly explained with the illustrations in the table below. • is used to indicate an indicator is displayed for the correspnding operation. • Some related tips and notes are explained in “More about this unit” (see pages 14 and 15).
4 ENGLISH Control panel — KD-G612/KD-G611/KD-G511 i M MODE button o (control panel release) button Display window ; DISC indicator a RND (disc random) indicator s RPT (repeat) indicator d LOUD (loud.
ENGLISH 5 Basic settings • See also “General settings — PSM” on pages 11 and 12. 1 2 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.” 2 Setting the clock Select “CLOCK H” (hour), then adjust the hour. Select “CLOCK M” (minute), then adjust the minute.
6 ENGLISH When an FM stereo broadcast is hard to receive Lights up when monaural mode is activated. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off.
7 ENGLISH Manual presetting Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. 1 2 3 Preset number flashes for a while. Listening to a preset station 1 2 Select the preset station (1 – 6) you want.
8 ENGLISH Using the standby receptions TA Standby Reception TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM. The volume changes to the preset TA volume level if the current level is lower than the preset level (see page 12).
9 ENGLISH To locate a particular track To select a number from 01 – 06: To select a number from 07 – 12: Prohibiting disc ejection You can lock a disc in the loading slot. To cancel the prohibition, repeat the same procedure. Selecting the playback modes You can use only one of the following playback modes at a time.
10 ENGLISH Sound adjustments You can select a preset sound mode suitable to the music genre (C-EQ: custom equalizer). 1 2 Indication (For) BAS TRE LOUD (bass) (treble) (loudness) USER (Flat sound) 00 .
11 ENGLISH Indications Selectable settings, [reference page] DEMO Display demonstration DE MO O N : [Initial]; Display demonstration will be activated automatically if no operation is done for about 20 seconds, [5].
12 ENGLISH Indications Selectable settings, [reference page] PTY-STBY PTY standby Activates PTY Standby Reception with one of the PTY codes, [8]. OFF [Initial] = PTY codes, [15] = (back to the beginni.
ENGLISH 13 Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
14 ENGLISH • When Alternative Frequency Reception is activated (with AF selected), Network- Tracking Reception is also activated automatically. On the other hand, Network- Tracking Reception cannot be deactivated without deactivating Alternative Frequency Reception.
ENGLISH 15 General settings—PSM • If you change the “AMP GAIN” setting from “HIGH PWR” to “LOW PWR” while the volume level is set higher than “VOL 30,” the unit automatically changes the volume level to “VOL 30.
16 ENGLISH Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). FM/AM • SSM automatic presetting does not work.
ENGLISH 17 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 45 W per channel Rear: 45 W per channel Continuous Power Output (RMS): Front: 17 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.
EN, FR 1005DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit © 2005 Victor Company of Japan, Limited Rear_KD-G162_161[EX_EU]f.
An important point after buying a device JVC KD-G162 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC KD-G162 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC KD-G162 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC KD-G162 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC KD-G162 will certainly help you make a decision on the purchase.
If you already are a holder of JVC KD-G162, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC KD-G162.
However, one of the most important roles played by the user manual is to help in solving problems with JVC KD-G162. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC KD-G162 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
