Instruction/ maintenance manual of the product KD-G126 JVC
Go to page of 18
ENGLISH For canceling the display demonstration, see page 5. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0331-001A [U/UH] KD-G126/KD-G125 5 CD RECEIVER KD-G126/KD-G125 KD- G126 KD- G125 KD-G125 KD-G126 Cover_KD-G126_001A_f.
ENGLISH 2 How to reset your unit • Your preset adjustments will also be erased. • If a disc is loaded, it will eject. Be careful not to drop the disc. How to forcibly eject a disc • If this does not work, reset your unit. • Be careful not to drop the disc when it ejects.
ENGLISH 3 CONTENTS Control panel — KD-G126 and KD-G125 ........ 4 Getting started ................................. 5 Basic operations .................................................... 5 Radio operations .............................. 6 Disc operations .
ENGLISH 4 Control panel — KD-G126 and KD-G125 1 (standby/on/attenuator) button 2 SOURCE button 3 BAND button 4 Loading slot 5 Display window 6 0 (eject) button 7 EQ (equalizer) button 8 ¢ / 4 butto.
ENGLISH 5 Basic settings • See also “General settings — PSM” on page 9. 1 2 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.” 2 Setting the clock Select “CLOCK H” (hour), then adjust the hour. Select “CLOCK M” (minute), then adjust the minute.
ENGLISH 6 Radio operations ~ Ÿ Lights up when receiving an FM stereo broadcast with sufficient signal strength. Selected band appears. ! Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again.
ENGLISH 7 Manual presetting Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. 1 2 3 Listening to a preset station 1 2 Select the preset station (1 – 6) you want. Disc operations Playing a disc in the unit All tracks will be played repeatedly until you change the source or eject the disc.
ENGLISH 8 Sound adjustments You can select a preset sound mode suitable to the music genre (C-EQ: custom equalizer). Indication (For) BAS TRE S.BS (bass) (treble) (super bass) USER (Flat sound) 00 00 .
ENGLISH 9 3 Adjust the PSM item selected. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure. You can change PSM (Preferred Setting Mode) items listed in the table that follows.
ENGLISH 10 Warped disc Sticker Sticker residue Disc Stick-on label Do not use the following discs: Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors.To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
ENGLISH 11 More about this unit Inserting a disc • When a disc is inserted upside down, the disc automatically ejects. • Do not insert 8 cm discs (single CD) and unusual shape discs (heart, flower, etc.) into the loading slot. Playing a CD-R or CD-RW • Use only “finalized” CD-Rs or CD-RWs.
ENGLISH 12 Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • This unit does not work at all. Reset the unit (see page 2). FM/AM • SSM automatic presetting does not work.
ENGLISH 13 CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 .
© 2005 Victor Company of Japan, Limited EN, TH 1005DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_KD-G126_001A_f.
KD-G126/KD-G125 In s tallation/Conn e ction Manual °“√μ‘¥μ—Èß/§ŸË¡◊Õ°“√μ‘¥μ—Èß GET0331-006A [U/UH] 1005DTSMDTJEIN EN, TH ENGLISH This u nit is d esi g ne d to operate on 12 V DC, NEGATIVE ground electrical systems .
When installing the unit without using the sleeve / ‡¡◊ËÕμ‘¥μ—Èß™ÿ¥ª√–°Õ∫‚¥¬‰¡Ë„™Èª≈Õ°ÀÿÈ¡ In a Toyota car for example, first remove the car ra d io an d install the u nit in its place.
3 Typical connections / °“√‡™◊ËÕ¡μËÕ·∫∫ª°μ Before connecting: Check the wirin g in the vehicle caref u lly. Incorrect connection may ca u se serio u s d ama g e to this u nit. The lea d s of the power cor d an d those of the connector from the car bo d y may be d ifferent in color.
4 Connecting the external amplifier or subwoofer / μËÕ·Õ¡ª≈‘ø“¬‡ÕÕ√ÏÀ√◊ Õ´ —∫«Ÿø‡øÕ√ϥȓππÕ° Yo u can connect an amplifier to u p g ra d e yo u r car stereo system.
An important point after buying a device JVC KD-G126 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC KD-G126 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC KD-G126 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC KD-G126 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC KD-G126 will certainly help you make a decision on the purchase.
If you already are a holder of JVC KD-G126, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC KD-G126.
However, one of the most important roles played by the user manual is to help in solving problems with JVC KD-G126. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC KD-G126 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
