Instruction/ maintenance manual of the product KD-DV6406 JVC
Go to page of 220
For canceling the display demonstration, see page 5. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0522-001A [UI] KD-DV6404 DVD/CD RECEIVER Cover_KD-DV6404_001A_f.
2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
3 How to reset your unit • Your preset adjustments will also be erased. How to forcibly eject a disc “PLEASE” and “EJECT” appear alternately on the display. • Be careful not to drop the disc when it ejects. • If this does not work, reset your unit.
4 Playable disc type Disc type Recording format, file type, etc Playable DVD DVD-Video (Region Code: 5) * 1 DVD-Audio DVD-ROM DVD Recordable/Rewritable (DVD-R/-RW * 2 , +R/+RW * 3 ) • DVD Video: UDF.
Avoid touching the connectors. Caution on volume setting Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.
6 Basic operations Using the control panel q Enter functions mode. • Press M MODE, then one of the following buttons (within 5 seconds)... MO : Turn on/off monaural reception. SSM : Automatic station presetting [Hold]. RPT : Select repeat play. RND : Select random play.
7 OPERATIONS Installing the battery Insert the batteries into the remote controller by matching the polarity (+ and –) correctly. Caution: Battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
8 1 button • Turns the power on if pressed briefly or attenuates the sound when the power is on. • Turns the power off if pressed and held. 2 5 / ∞ buttons • FM/AM : Selects the preset stations. • DISC : – DVD-Video: Selects the title. – DVD-VR: Selects the program/playlist.
9 OPERATIONS u * % / fi buttons • DVD-Video: Makes selection/settings. • CD-CH : Changes discs in the magazine. @ / # buttons • DVD-Video: Makes selection/settings. • DivX/MPEG Video: Skips back or forward by about five minutes. ENT (enter) button • Confirms selection.
10 Change the display information. Clock = Station name * = Frequency = (back to the beginning) • If no title is assigned to a station, “NO NAME” appears. To assign a title to a station, see page 28. When an FM stereo broadcast is hard to receive 1 2 Reception improves, but stereo effect will be lost.
11 OPERATIONS Prohibiting disc ejection To cancel the prohibition, repeat the same procedure. To stop play and eject the disc • Press SOURCE to listen to another playback source. To listen to a preset station 3 Disc operations Before performing any operations.
12 Change the display information. Current chapter number and Elapsed playing time = Current chapter number and Clock = Current title and chapter number = (back to the beginning) Current chapter numbe.
13 OPERATIONS After pressing M MODE, press the following buttons to... Disc type Skip 10 chapters (during play or pause) CHAPTER RPT : Repeat current chapter TITLE RPT : Repeat current title — Skip .
14 To search for chapter/title/program/playlist/folder/track directly (DVD/DivX/MPEG Video/MP3/ WMA/WAV/CD) 1 While holding SHIFT, press DIRECT repeatedly to select the desired search mode. DVD-Video : DVD-VR : DivX/MPEG Video : MP3/WMA/WAV : 2 While holding SHIFT, press the number buttons (0 – 9) to enter the desired number.
15 OPERATIONS Stop play Stop play Stop play Start play/Pause (if pressed during play) Start play/Pause (if pressed during play) Start play/Pause (if pressed during play) Reverse/forward track search * 1 • Forward slow motion * 2 during pause. (No sound can be heard.
16 Operations using the on-screen bar (DVD/DVD-VR/DivX/MPEG Video/VCD) These operations are possible on the monitor using the remote controller. 1 Show the on-screen bar (see page 17). 2 Select an item. 3 Make a selection. If pop-up menu appears... • To cancel pop-up menu, press RETURN.
17 OPERATIONS Information Operation On-screen bar Ex.: DVD-Video 1 Disc type 2 • DVD-Video/DTS-CD: Audio signal format type and channel • VCD: PBC 3 Playback mode * 1 DVD-Video: T. RPT : Title repeat C. RPT : Chapter repeat DVD-VR: C. RPT : Chapter repeat PG.
18 7 Track information 8 Track list with the current track selected To select a playback mode 1 While control screen is displayed... Playback mode selection screen appears on the folder list section of the control screen. 2 Select a playback mode. 3 Select an item.
19 OPERATIONS 3 Current page/total number of the pages included in the list 4 Current folder/track (highlighted bar) List screen (DVD-VR) You can use ORIGINAL PROGRAM or PLAY LIST screen anytime while playing DVD-VR with its data recorded. 1 Select a list screen.
20 Listening to the CD changer It is recommended to use a JVC MP3-compatible CD changer with your unit. You can connect a CD changer to the CD changer jack on the rear of the unit. • You can only play conventional CDs (including CD Text) and MP3 discs.
21 EXTERNAL DEVICES Listening to the iPod Before operating, connect the Interface adapter for iPod , KS-PD100 (separately purchased) to the CD changer jack on the rear of the unit. Preparation: Make sure “CHANGER” is selected for the external input setting, see page 25.
22 EXTERNAL DEVICES Listening to the other external components You can connect an external component to: • CD changer jack on the rear of this unit using the following adapters: – Line Input Adapter , KS-U57 – AUX Input Adapter , KS-U58 Preparation: Make sure “EXT INPUT” is selected for the external input setting, see page 25.
23 SETTINGS Selecting a preset sound mode You can select a preset sound mode suitable to the music genre (c-EQ: custom equalizer). Preset value setting for each sound mode Sound mode Preset value BASS.
24 3 Select or adjust the selected PSM item. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure. You can change PSM (Preferred Setting Mode) items listed in the table below and on page 25. 1 Enter the PSM settings. 2 Select a PSM item.
25 SETTINGS Indications Item ( : Initial) Setting, [reference page] SCROLL * 2 Scroll • ONCE • AUTO • OFF : Scrolls the displayed information once. : Repeats scrolling (at 5-second intervals). : Cancels. • Pressing DISP for more than one second can scroll the display regardless of the setting.
26 Disc setup menu These operations are possible on the monitor using the remote controller. 1 Enter the disc setup menu while stop. 2 Select a menu. 3 Select an item you want to set up.
27 SETTINGS Menu Item Setting PICTURE MONITOR TYPE Select the monitor type to watch a wide screen picture on your monitor. OSD POSITION Select the on-screen bar position on the monitor. • 1 : Higher position • 2 : Lower position (Guidance below the disc setup menu will disappear.
28 SETTINGS & REFERENCES Title assignment You can assign titles to 30 station frequencies (FM and AM) using 8 characters (maximum) for each title. 1 Select a station you want to assign a title (see also page 10). 2 Show the title entry screen. 3 Assign a title.
29 REFERENCES • After ejecting a disc, “NO DISC” appears and you cannot operate some of the buttons. Insert another disc or press SOURCE to select another playback source. Playing Recordable/Rewritable discs • This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder).
30 Changing the source • If you change the source, playback also stops (without ejecting the disc). Next time you select “DISC” for the playback source, disc play starts from where it has been stopped previously. iPod • You can control the following types of iPods through the interface adapter.
31 REFERENCES About sounds reproduced through the rear terminals • Through the analog terminals (Speaker out/LINE OUT): 2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are downmixed. DTS sound cannot be reproduced.
32 Output signals through the DIGITAL OUT terminal Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see page 27).
33 REFERENCES Language codes Code Language Code Language Code Language Code Language Code Language AA Afar FA Persian KK Kazakh NO Norwegian ST Sesotho AB Abkhazian FI Finnish KL Greenlandic OC Occita.
34 How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
35 REFERENCES Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptom Remedy/Cause General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
36 Symptom Remedy/Cause DivX/MPEG Video/MP3/WMA/WAV • Disc cannot be played back. • Change the disc. • Record the tracks using a compliant application in the appropriate discs (see page 4). • Add the extension code <.divx>, <.div>, <.
37 REFERENCES Symptom Remedy/Cause iPod • The iPod does not turn on or does not work. • Check the connecting cable and its connection. • Charge the battery. • Update the firmware version. • The sound is distorted. Deactivate the equalizer either on this unit or the iPod.
38 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
39 REFERENCES DVD/CD PLAYER SECTION Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: DVD, fs=48 kHz/96 kHz: 16 Hz to 22 000 Hz CD, fs=44.
© 2007 Victor Company of Japan, Limited EN 1207DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_KD-DV6404_001A_f.
1 KD-DV6404 Installation/Connection Manual GET0522-002A [UI] 1207DTSMDTJEIN EN This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.
2 INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • Make sure not to block the fan on the rear to maintain proper ventilation when installing the unit.
3 B Connecting the parking brake wire When i nstal ling th e monito r in a locat ion whe re it can b e seen by t he driver Connect the parking brake wire to the parking brake system built in the car.
4 When connecting the external components, refer also to the manuals supplied for the components and adapter. CAUTION: Before connecting the external components, make sure that the unit is turned off. You can connect the following JVC components to the CD changer jack.
ENGLISH DVD/CD RECEIVER KD-DV6406/KD-DV6405 For canceling the display demonstration, see page 5. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0520-001A [U] KD-DV6406/KD-DV6405 Cover_KD-DV6406_001A_2.indd 1 Cover_KD-DV6406_001A_2.
ENGLISH 2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
ENGLISH 3 How to reset your unit • Your preset adjustments will also be erased. How to forcibly eject a disc “PLEASE” and “EJECT” appear alternately on the display. • Be careful not to drop the disc when it ejects. • If this does not work, reset your unit.
ENGLISH 4 Playable disc type Disc type Recording format, file type, etc Playable DVD DVD-Video (Region Code: 3) * 1 DVD-Audio DVD-ROM DVD Recordable/Rewritable (DVD-R/-RW * 2 , +R/+RW * 3 ) • DVD Vi.
Avoid touching the connectors. Caution on volume setting Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.
ENGLISH 6 Basic operations Using the control panel q Enter functions mode. • Press M MODE, then one of the following buttons (within 5 seconds)... MO : Turn on/off monaural reception. SSM : Automatic station presetting [Hold]. RPT : Select repeat play.
ENGLISH 7 OPERATIONS Installing the battery Insert the batteries into the remote controller by matching the polarity (+ and –) correctly. Caution: Battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
ENGLISH 8 1 button • Turns the power on if pressed briefly or attenuates the sound when the power is on. • Turns the power off if pressed and held. 2 5 / ∞ buttons • FM/AM : Selects the preset stations. • DISC : – DVD-Video: Selects the title.
ENGLISH 9 OPERATIONS u * % / fi buttons • DVD-Video: Makes selection/settings. • CD-CH : Changes discs in the magazine. @ / # buttons • DVD-Video: Makes selection/settings. • DivX/MPEG Video: Skips back or forward by about five minutes. ENT (enter) button • Confirms selection.
ENGLISH 10 Change the display information. Clock = Station name * = Frequency = (back to the beginning) • If no title is assigned to a station, “NO NAME” appears. To assign a title to a station, see page 28. When an FM stereo broadcast is hard to receive 1 2 Reception improves, but stereo effect will be lost.
ENGLISH 11 OPERATIONS Prohibiting disc ejection To cancel the prohibition, repeat the same procedure. To stop play and eject the disc • Press SOURCE to listen to another playback source. To listen to a preset station 3 Disc operations Before performing any operations.
ENGLISH 12 Change the display information. Current chapter number and Elapsed playing time = Current chapter number and Clock = Current title and chapter number = (back to the beginning) Current chapt.
ENGLISH 13 OPERATIONS After pressing M MODE, press the following buttons to... Disc type Skip 10 chapters (during play or pause) CHAPTER RPT : Repeat current chapter TITLE RPT : Repeat current title .
ENGLISH 14 To search for chapter/title/program/playlist/folder/track directly (DVD/DivX/MPEG Video/MP3/ WMA/WAV/CD) 1 While holding SHIFT, press DIRECT repeatedly to select the desired search mode. DVD-Video : DVD-VR : DivX/MPEG Video : MP3/WMA/WAV : 2 While holding SHIFT, press the number buttons (0 – 9) to enter the desired number.
ENGLISH 15 OPERATIONS Stop play Stop play Stop play Start play/Pause (if pressed during play) Start play/Pause (if pressed during play) Start play/Pause (if pressed during play) Reverse/forward track search * 1 • Forward slow motion * 2 during pause.
ENGLISH 16 Operations using the on-screen bar (DVD/DVD-VR/DivX/MPEG Video/VCD) These operations are possible on the monitor using the remote controller. 1 Show the on-screen bar (see page 17). 2 Select an item. 3 Make a selection. If pop-up menu appears.
ENGLISH 17 OPERATIONS Information Operation On-screen bar Ex.: DVD-Video 1 Disc type 2 • DVD-Video/DTS-CD: Audio signal format type and channel • VCD: PBC 3 Playback mode * 1 DVD-Video: T. RPT : Title repeat C. RPT : Chapter repeat DVD-VR: C. RPT : Chapter repeat PG.
ENGLISH 18 7 Track information 8 Track list with the current track selected To select a playback mode 1 While control screen is displayed... Playback mode selection screen appears on the folder list section of the control screen. 2 Select a playback mode.
ENGLISH 19 OPERATIONS 3 Current page/total number of the pages included in the list 4 Current folder/track (highlighted bar) List screen (DVD-VR) You can use ORIGINAL PROGRAM or PLAY LIST screen anytime while playing DVD-VR with its data recorded. 1 Select a list screen.
ENGLISH 20 Listening to the CD changer It is recommended to use a JVC MP3-compatible CD changer with your unit. You can connect a CD changer to the CD changer jack on the rear of the unit. • You can only play conventional CDs (including CD Text) and MP3 discs.
ENGLISH 21 EXTERNAL DEVICES Listening to the iPod Before operating, connect the Interface adapter for iPod , KS-PD100 (separately purchased) to the CD changer jack on the rear of the unit. Preparation: Make sure “CHANGER” is selected for the external input setting, see page 25.
ENGLISH 22 EXTERNAL DEVICES Listening to the other external components You can connect an external component to: • CD changer jack on the rear of this unit using the following adapters: – Line Input Adapter , KS-U57 – AUX Input Adapter , KS-U58 Preparation: Make sure “EXT INPUT” is selected for the external input setting, see page 25.
ENGLISH 23 SETTINGS Selecting a preset sound mode You can select a preset sound mode suitable to the music genre (c-EQ: custom equalizer). Preset value setting for each sound mode Sound mode Preset va.
ENGLISH 24 3 Select or adjust the selected PSM item. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure. You can change PSM (Preferred Setting Mode) items listed in the table below and on page 25. 1 Enter the PSM settings.
ENGLISH 25 SETTINGS Indications Item ( : Initial) Setting, [reference page] SCROLL * 2 Scroll • ONCE • AUTO • OFF : Scrolls the displayed information once. : Repeats scrolling (at 5-second intervals). : Cancels. • Pressing DISP for more than one second can scroll the display regardless of the setting.
ENGLISH 26 Disc setup menu These operations are possible on the monitor using the remote controller. 1 Enter the disc setup menu while stop. 2 Select a menu. 3 Select an item you want to set up. • To cancel pop-up menu, press RETURN. 4 Select an option.
ENGLISH 27 SETTINGS Menu Item Setting PICTURE MONITOR TYPE Select the monitor type to watch a wide screen picture on your monitor. OSD POSITION Select the on-screen bar position on the monitor. • 1 : Higher position • 2 : Lower position (Guidance below the disc setup menu will disappear.
ENGLISH 28 SETTINGS & REFERENCES Title assignment You can assign titles to 30 station frequencies (FM and AM) using 8 characters (maximum) for each title. 1 Select a station you want to assign a title (see also page 10). 2 Show the title entry screen.
ENGLISH 29 REFERENCES • After ejecting a disc, “NO DISC” appears and you cannot operate some of the buttons. Insert another disc or press SOURCE to select another playback source. Playing Recordable/Rewritable discs • This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder).
ENGLISH 30 Changing the source • If you change the source, playback also stops (without ejecting the disc). Next time you select “DISC” for the playback source, disc play starts from where it has been stopped previously. iPod • You can control the following types of iPods through the interface adapter.
ENGLISH 31 REFERENCES About sounds reproduced through the rear terminals • Through the analog terminals (Speaker out/LINE OUT): 2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are downmixed. DTS sound cannot be reproduced.
ENGLISH 32 Output signals through the DIGITAL OUT terminal Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see page 27).
ENGLISH 33 REFERENCES Language codes Code Language Code Language Code Language Code Language Code Language AA Afar FA Persian KK Kazakh NO Norwegian ST Sesotho AB Abkhazian FI Finnish KL Greenlandic O.
ENGLISH 34 How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
ENGLISH 35 REFERENCES Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptom Remedy/Cause General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
ENGLISH 36 Symptom Remedy/Cause DivX/MPEG Video/MP3/WMA/WAV • Disc cannot be played back. • Change the disc. • Record the tracks using a compliant application in the appropriate discs (see page 4). • Add the extension code <.divx>, <.
ENGLISH 37 REFERENCES Symptom Remedy/Cause iPod • The iPod does not turn on or does not work. • Check the connecting cable and its connection. • Charge the battery. • Update the firmware version. • The sound is distorted. Deactivate the equalizer either on this unit or the iPod.
ENGLISH 38 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
ENGLISH 39 REFERENCES DVD/CD PLAYER SECTION Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: DVD, fs=48 kHz/96 kHz: 16 Hz to 22 000 Hz CD, fs=44.
© 2007 Victor Company of Japan, Limited EN, CT 1207DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_KD-DV6406_001A_2.
1 KD-DV6406/KD-DV6405 Installation/Connection Manual 安裝/連接手冊 GET0520-006A [U/UT] 1207DTSMDTJEIN EN, CT ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.
2 INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • Make sure not to block the fan on the rear to maintain proper ventilation when installing the unit.
3 ENGLISH 中文 B Connecting the parking brake wire / 連接至手剎車導線 When i nstal ling t he monit or in a loc ation wh ere it ca n be see n by the dri ver Connect the parking brake wire to the parking brake system built in the car.
4 When connecting the external components, refer also to the manuals supplied for the components and adapter. CAUTION: Before connecting the external components, make sure that the unit is turned off. You can connect the following JVC components to the CD changer jack.
ENGLISH INDONESIA DVD/CD RECEIVER ALA T PENERIMA DVD/CD For canceling the display demonstration, see page 5. Untuk membatalkan tampilan demonstrasi, liha t halaman 5. For installation and connections, refer to the separate manual. Untuk instalasi dan penyambungan, lihat buku pedoman terpisah.
ENGLISH 2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
ENGLISH 3 How to reset your unit • Your preset adjustments will also be erased. How to forcibly eject a disc “PLEASE” and “EJECT” appear alternately on the display. • Be careful not to drop the disc when it ejects. • If this does not work, reset your unit.
ENGLISH 4 Playable disc type Disc type Recording format, file type, etc Playable DVD DVD-Video (Region Code: 3) * 1 DVD-Audio DVD-ROM DVD Recordable/Rewritable (DVD-R/-RW * 2 , +R/+RW * 3 ) • DVD Vi.
Avoid touching the connectors. Caution on volume setting Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.
ENGLISH 6 Basic operations Using the control panel q Enter functions mode. • Press M MODE, then one of the following buttons (within 5 seconds)... MO : Turn on/off monaural reception. SSM : Automatic station presetting [Hold]. RPT : Select repeat play.
ENGLISH 7 OPERATIONS Installing the battery Insert the batteries into the remote controller by matching the polarity (+ and –) correctly. Caution: Battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
ENGLISH 8 1 button • Turns the power on if pressed briefly or attenuates the sound when the power is on. • Turns the power off if pressed and held. 2 5 / ∞ buttons • FM/AM : Selects the preset stations. • DISC : – DVD-Video: Selects the title.
ENGLISH 9 OPERATIONS u * % / fi buttons • DVD-Video: Makes selection/settings. • CD-CH : Changes discs in the magazine. @ / # buttons • DVD-Video: Makes selection/settings. • DivX/MPEG Video: Skips back or forward by about five minutes. ENT (enter) button • Confirms selection.
ENGLISH 10 Change the display information. Clock = Station name * = Frequency = (back to the beginning) • If no title is assigned to a station, “NO NAME” appears. To assign a title to a station, see page 28. When an FM stereo broadcast is hard to receive 1 2 Reception improves, but stereo effect will be lost.
ENGLISH 11 OPERATIONS Prohibiting disc ejection To cancel the prohibition, repeat the same procedure. To stop play and eject the disc • Press SOURCE to listen to another playback source. To listen to a preset station 3 Disc operations Before performing any operations.
ENGLISH 12 Change the display information. Current chapter number and Elapsed playing time = Current chapter number and Clock = Current title and chapter number = (back to the beginning) Current chapt.
ENGLISH 13 OPERATIONS After pressing M MODE, press the following buttons to... Disc type Skip 10 chapters (during play or pause) CHAPTER RPT : Repeat current chapter TITLE RPT : Repeat current title .
ENGLISH 14 To search for chapter/title/program/playlist/folder/track directly (DVD/DivX/MPEG Video/MP3/ WMA/WAV/CD) 1 While holding SHIFT, press DIRECT repeatedly to select the desired search mode. DVD-Video : DVD-VR : DivX/MPEG Video : MP3/WMA/WAV : 2 While holding SHIFT, press the number buttons (0 – 9) to enter the desired number.
ENGLISH 15 OPERATIONS Stop play Stop play Stop play Start play/Pause (if pressed during play) Start play/Pause (if pressed during play) Start play/Pause (if pressed during play) Reverse/forward track search * 1 • Forward slow motion * 2 during pause.
ENGLISH 16 Operations using the on-screen bar (DVD/DVD-VR/DivX/MPEG Video/VCD) These operations are possible on the monitor using the remote controller. 1 Show the on-screen bar (see page 17). 2 Select an item. 3 Make a selection. If pop-up menu appears.
ENGLISH 17 OPERATIONS Information Operation On-screen bar Ex.: DVD-Video 1 Disc type 2 • DVD-Video/DTS-CD: Audio signal format type and channel • VCD: PBC 3 Playback mode * 1 DVD-Video: T. RPT : Title repeat C. RPT : Chapter repeat DVD-VR: C. RPT : Chapter repeat PG.
ENGLISH 18 7 Track information 8 Track list with the current track selected To select a playback mode 1 While control screen is displayed... Playback mode selection screen appears on the folder list section of the control screen. 2 Select a playback mode.
ENGLISH 19 OPERATIONS 3 Current page/total number of the pages included in the list 4 Current folder/track (highlighted bar) List screen (DVD-VR) You can use ORIGINAL PROGRAM or PLAY LIST screen anytime while playing DVD-VR with its data recorded. 1 Select a list screen.
ENGLISH 20 Listening to the CD changer It is recommended to use a JVC MP3-compatible CD changer with your unit. You can connect a CD changer to the CD changer jack on the rear of the unit. • You can only play conventional CDs (including CD Text) and MP3 discs.
ENGLISH 21 EXTERNAL DEVICES Listening to the iPod Before operating, connect the Interface adapter for iPod , KS-PD100 (separately purchased) to the CD changer jack on the rear of the unit. Preparation: Make sure “CHANGER” is selected for the external input setting, see page 25.
ENGLISH 22 EXTERNAL DEVICES Listening to the other external components You can connect an external component to: • CD changer jack on the rear of this unit using the following adapters: – Line Input Adapter , KS-U57 – AUX Input Adapter , KS-U58 Preparation: Make sure “EXT INPUT” is selected for the external input setting, see page 25.
ENGLISH 23 SETTINGS Selecting a preset sound mode You can select a preset sound mode suitable to the music genre (c-EQ: custom equalizer). Preset value setting for each sound mode Sound mode Preset va.
ENGLISH 24 3 Select or adjust the selected PSM item. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure. You can change PSM (Preferred Setting Mode) items listed in the table below and on page 25. 1 Enter the PSM settings.
ENGLISH 25 SETTINGS Indications Item ( : Initial) Setting, [reference page] SCROLL * 2 Scroll • ONCE • AUTO • OFF : Scrolls the displayed information once. : Repeats scrolling (at 5-second intervals). : Cancels. • Pressing DISP for more than one second can scroll the display regardless of the setting.
ENGLISH 26 Disc setup menu These operations are possible on the monitor using the remote controller. 1 Enter the disc setup menu while stop. 2 Select a menu. 3 Select an item you want to set up. • To cancel pop-up menu, press RETURN. 4 Select an option.
ENGLISH 27 SETTINGS Menu Item Setting PICTURE MONITOR TYPE Select the monitor type to watch a wide screen picture on your monitor. OSD POSITION Select the on-screen bar position on the monitor. • 1 : Higher position • 2 : Lower position (Guidance below the disc setup menu will disappear.
ENGLISH 28 SETTINGS & REFERENCES Title assignment You can assign titles to 30 station frequencies (FM and AM) using 8 characters (maximum) for each title. 1 Select a station you want to assign a title (see also page 10). 2 Show the title entry screen.
ENGLISH 29 REFERENCES • After ejecting a disc, “NO DISC” appears and you cannot operate some of the buttons. Insert another disc or press SOURCE to select another playback source. Playing Recordable/Rewritable discs • This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder).
ENGLISH 30 Changing the source • If you change the source, playback also stops (without ejecting the disc). Next time you select “DISC” for the playback source, disc play starts from where it has been stopped previously. iPod • You can control the following types of iPods through the interface adapter.
ENGLISH 31 REFERENCES About sounds reproduced through the rear terminals • Through the analog terminals (Speaker out/LINE OUT): 2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are downmixed. DTS sound cannot be reproduced.
ENGLISH 32 Output signals through the DIGITAL OUT terminal Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see page 27).
ENGLISH 33 REFERENCES Language codes Code Language Code Language Code Language Code Language Code Language AA Afar FA Persian KK Kazakh NO Norwegian ST Sesotho AB Abkhazian FI Finnish KL Greenlandic O.
ENGLISH 34 How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
ENGLISH 35 REFERENCES Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptom Remedy/Cause General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
ENGLISH 36 Symptom Remedy/Cause DivX/MPEG Video/MP3/WMA/WAV • Disc cannot be played back. • Change the disc. • Record the tracks using a compliant application in the appropriate discs (see page 4). • Add the extension code <.divx>, <.
ENGLISH 37 REFERENCES Symptom Remedy/Cause iPod • The iPod does not turn on or does not work. • Check the connecting cable and its connection. • Charge the battery. • Update the firmware version. • The sound is distorted. Deactivate the equalizer either on this unit or the iPod.
ENGLISH 38 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
ENGLISH 39 REFERENCES DVD/CD PLAYER SECTION Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: DVD, fs=48 kHz/96 kHz: 16 Hz to 22 000 Hz CD, fs=44.
© 2007 Victor Company of Japan, Limited EN, IN 1207DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Ada MASALAH dengan cara pengoperasian? Setel kembali unit Anda Lihat halaman mengenai Bagaimana mereset unit anda Rear_KD-DV6406_003A_f.
1 KD-DV6406/KD-DV6405 Installation/Connection Manual Manual Pemasangan/Penyambungan GET0520-008A [UN] 1207DTSMDTJEIN EN, IN ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.
2 INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • Make sure not to block the fan on the rear to maintain proper ventilation when installing the unit.
3 ENGLISH INDONESIA B Connecting the parking brake wire / Menyambung kabel rem parkir When i nstal ling th e monito r in a locat ion whe re it can b e seen by t he driver Connect the parking brake wire to the parking brake system built in the car.
4 When connecting the external components, refer also to the manuals supplied for the components and adapter. CAUTION: Before connecting the external components, make sure that the unit is turned off. You can connect the following JVC components to the CD changer jack.
ENGLISH For canceling the display demonstration, see page 5. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0520-004A [UT] DVD/CD RECEIVER KD-DV6406/KD-DV6405 KD-DV6406/KD-DV6405 Cover_KD-DV6406_004A_f.indd 1 Cover_KD-DV6406_004A_f.
ENGLISH 2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
ENGLISH 3 How to reset your unit • Your preset adjustments will also be erased. How to forcibly eject a disc “PLEASE” and “EJECT” appear alternately on the display. • Be careful not to drop the disc when it ejects. • If this does not work, reset your unit.
ENGLISH 4 Playable disc type Disc type Recording format, file type, etc Playable DVD DVD-Video (Region Code: 3) * 1 DVD-Audio DVD-ROM DVD Recordable/Rewritable (DVD-R/-RW * 2 , +R/+RW * 3 ) • DVD Vi.
Avoid touching the connectors. Caution on volume setting Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.
ENGLISH 6 Basic operations Using the control panel q Enter functions mode. • Press M MODE, then one of the following buttons (within 5 seconds)... MO : Turn on/off monaural reception. SSM : Automatic station presetting [Hold]. RPT : Select repeat play.
ENGLISH 7 OPERATIONS Installing the battery Insert the batteries into the remote controller by matching the polarity (+ and –) correctly. Caution: Battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
ENGLISH 8 1 button • Turns the power on if pressed briefly or attenuates the sound when the power is on. • Turns the power off if pressed and held. 2 5 / ∞ buttons • FM/AM : Selects the preset stations. • DISC : – DVD-Video: Selects the title.
ENGLISH 9 OPERATIONS u * % / fi buttons • DVD-Video: Makes selection/settings. • CD-CH : Changes discs in the magazine. @ / # buttons • DVD-Video: Makes selection/settings. • DivX/MPEG Video: Skips back or forward by about five minutes. ENT (enter) button • Confirms selection.
ENGLISH 10 Change the display information. Clock = Station name * = Frequency = (back to the beginning) • If no title is assigned to a station, “NO NAME” appears. To assign a title to a station, see page 28. When an FM stereo broadcast is hard to receive 1 2 Reception improves, but stereo effect will be lost.
ENGLISH 11 OPERATIONS Prohibiting disc ejection To cancel the prohibition, repeat the same procedure. To stop play and eject the disc • Press SOURCE to listen to another playback source. To listen to a preset station 3 Disc operations Before performing any operations.
ENGLISH 12 Change the display information. Current chapter number and Elapsed playing time = Current chapter number and Clock = Current title and chapter number = (back to the beginning) Current chapt.
ENGLISH 13 OPERATIONS After pressing M MODE, press the following buttons to... Disc type Skip 10 chapters (during play or pause) CHAPTER RPT : Repeat current chapter TITLE RPT : Repeat current title .
ENGLISH 14 To search for chapter/title/program/playlist/folder/track directly (DVD/DivX/MPEG Video/MP3/ WMA/WAV/CD) 1 While holding SHIFT, press DIRECT repeatedly to select the desired search mode. DVD-Video : DVD-VR : DivX/MPEG Video : MP3/WMA/WAV : 2 While holding SHIFT, press the number buttons (0 – 9) to enter the desired number.
ENGLISH 15 OPERATIONS Stop play Stop play Stop play Start play/Pause (if pressed during play) Start play/Pause (if pressed during play) Start play/Pause (if pressed during play) Reverse/forward track search * 1 • Forward slow motion * 2 during pause.
ENGLISH 16 Operations using the on-screen bar (DVD/DVD-VR/DivX/MPEG Video/VCD) These operations are possible on the monitor using the remote controller. 1 Show the on-screen bar (see page 17). 2 Select an item. 3 Make a selection. If pop-up menu appears.
ENGLISH 17 OPERATIONS Information Operation On-screen bar Ex.: DVD-Video 1 Disc type 2 • DVD-Video/DTS-CD: Audio signal format type and channel • VCD: PBC 3 Playback mode * 1 DVD-Video: T. RPT : Title repeat C. RPT : Chapter repeat DVD-VR: C. RPT : Chapter repeat PG.
ENGLISH 18 7 Track information 8 Track list with the current track selected To select a playback mode 1 While control screen is displayed... Playback mode selection screen appears on the folder list section of the control screen. 2 Select a playback mode.
ENGLISH 19 OPERATIONS 3 Current page/total number of the pages included in the list 4 Current folder/track (highlighted bar) List screen (DVD-VR) You can use ORIGINAL PROGRAM or PLAY LIST screen anytime while playing DVD-VR with its data recorded. 1 Select a list screen.
ENGLISH 20 Listening to the CD changer It is recommended to use a JVC MP3-compatible CD changer with your unit. You can connect a CD changer to the CD changer jack on the rear of the unit. • You can only play conventional CDs (including CD Text) and MP3 discs.
ENGLISH 21 EXTERNAL DEVICES Listening to the iPod Before operating, connect the Interface adapter for iPod , KS-PD100 (separately purchased) to the CD changer jack on the rear of the unit. Preparation: Make sure “CHANGER” is selected for the external input setting, see page 25.
ENGLISH 22 EXTERNAL DEVICES Listening to the other external components You can connect an external component to: • CD changer jack on the rear of this unit using the following adapters: – Line Input Adapter , KS-U57 – AUX Input Adapter , KS-U58 Preparation: Make sure “EXT INPUT” is selected for the external input setting, see page 25.
ENGLISH 23 SETTINGS Selecting a preset sound mode You can select a preset sound mode suitable to the music genre (c-EQ: custom equalizer). Preset value setting for each sound mode Sound mode Preset va.
ENGLISH 24 3 Select or adjust the selected PSM item. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure. You can change PSM (Preferred Setting Mode) items listed in the table below and on page 25. 1 Enter the PSM settings.
ENGLISH 25 SETTINGS Indications Item ( : Initial) Setting, [reference page] SCROLL * 2 Scroll • ONCE • AUTO • OFF : Scrolls the displayed information once. : Repeats scrolling (at 5-second intervals). : Cancels. • Pressing DISP for more than one second can scroll the display regardless of the setting.
ENGLISH 26 Disc setup menu These operations are possible on the monitor using the remote controller. 1 Enter the disc setup menu while stop. 2 Select a menu. 3 Select an item you want to set up. • To cancel pop-up menu, press RETURN. 4 Select an option.
ENGLISH 27 SETTINGS Menu Item Setting PICTURE MONITOR TYPE Select the monitor type to watch a wide screen picture on your monitor. OSD POSITION Select the on-screen bar position on the monitor. • 1 : Higher position • 2 : Lower position (Guidance below the disc setup menu will disappear.
ENGLISH 28 SETTINGS & REFERENCES Title assignment You can assign titles to 30 station frequencies (FM and AM) using 8 characters (maximum) for each title. 1 Select a station you want to assign a title (see also page 10). 2 Show the title entry screen.
ENGLISH 29 REFERENCES • After ejecting a disc, “NO DISC” appears and you cannot operate some of the buttons. Insert another disc or press SOURCE to select another playback source. Playing Recordable/Rewritable discs • This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder).
ENGLISH 30 Changing the source • If you change the source, playback also stops (without ejecting the disc). Next time you select “DISC” for the playback source, disc play starts from where it has been stopped previously. iPod • You can control the following types of iPods through the interface adapter.
ENGLISH 31 REFERENCES About sounds reproduced through the rear terminals • Through the analog terminals (Speaker out/LINE OUT): 2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are downmixed. DTS sound cannot be reproduced.
ENGLISH 32 Output signals through the DIGITAL OUT terminal Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see page 27).
ENGLISH 33 REFERENCES Language codes Code Language Code Language Code Language Code Language Code Language AA Afar FA Persian KK Kazakh NO Norwegian ST Sesotho AB Abkhazian FI Finnish KL Greenlandic O.
ENGLISH 34 How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
ENGLISH 35 REFERENCES Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptom Remedy/Cause General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
ENGLISH 36 Symptom Remedy/Cause DivX/MPEG Video/MP3/WMA/WAV • Disc cannot be played back. • Change the disc. • Record the tracks using a compliant application in the appropriate discs (see page 4). • Add the extension code <.divx>, <.
ENGLISH 37 REFERENCES Symptom Remedy/Cause iPod • The iPod does not turn on or does not work. • Check the connecting cable and its connection. • Charge the battery. • Update the firmware version. • The sound is distorted. Deactivate the equalizer either on this unit or the iPod.
ENGLISH 38 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
ENGLISH 39 REFERENCES DVD/CD PLAYER SECTION Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: DVD, fs=48 kHz/96 kHz: 16 Hz to 22 000 Hz CD, fs=44.
© 2007 Victor Company of Japan, Limited EN, CT 1207DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_KD-DV6406_004A_f.
1 KD-DV6406/KD-DV6405 Installation/Connection Manual 安裝/連接手冊 GET0520-006A [U/UT] 1207DTSMDTJEIN EN, CT ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.
2 INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • Make sure not to block the fan on the rear to maintain proper ventilation when installing the unit.
3 ENGLISH 中文 B Connecting the parking brake wire / 連接至手剎車導線 When i nstal ling t he monit or in a loc ation wh ere it ca n be see n by the dri ver Connect the parking brake wire to the parking brake system built in the car.
4 When connecting the external components, refer also to the manuals supplied for the components and adapter. CAUTION: Before connecting the external components, make sure that the unit is turned off. You can connect the following JVC components to the CD changer jack.
For canceling the display demonstration, see page 5. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0520-005A [A] KD-DV6406/KD-DV6405 DVD/CD RECEIVER Cover_KD-DV6406_005A_f.
2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
3 How to reset your unit • Your preset adjustments will also be erased. How to forcibly eject a disc “PLEASE” and “EJECT” appear alternately on the display. • Be careful not to drop the disc when it ejects. • If this does not work, reset your unit.
4 Playable disc type Disc type Recording format, file type, etc Playable DVD DVD-Video (Region Code: 4) * 1 DVD-Audio DVD-ROM DVD Recordable/Rewritable (DVD-R/-RW * 2 , +R/+RW * 3 ) • DVD Video: UDF.
Avoid touching the connectors. Caution on volume setting Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.
6 Basic operations Using the control panel q Enter functions mode. • Press M MODE, then one of the following buttons (within 5 seconds)... MO : Turn on/off monaural reception. SSM : Automatic station presetting [Hold]. RPT : Select repeat play. RND : Select random play.
7 OPERATIONS Installing the battery Insert the batteries into the remote controller by matching the polarity (+ and –) correctly. Caution: Battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
8 1 button • Turns the power on if pressed briefly or attenuates the sound when the power is on. • Turns the power off if pressed and held. 2 5 / ∞ buttons • FM/AM : Selects the preset stations. • DISC : – DVD-Video: Selects the title. – DVD-VR: Selects the program/playlist.
9 OPERATIONS u * % / fi buttons • DVD-Video: Makes selection/settings. • CD-CH : Changes discs in the magazine. @ / # buttons • DVD-Video: Makes selection/settings. • DivX/MPEG Video: Skips back or forward by about five minutes. ENT (enter) button • Confirms selection.
10 Change the display information. Clock = Station name * = Frequency = (back to the beginning) • If no title is assigned to a station, “NO NAME” appears. To assign a title to a station, see page 28. When an FM stereo broadcast is hard to receive 1 2 Reception improves, but stereo effect will be lost.
11 OPERATIONS Prohibiting disc ejection To cancel the prohibition, repeat the same procedure. To stop play and eject the disc • Press SOURCE to listen to another playback source. To listen to a preset station 3 Disc operations Before performing any operations.
12 Change the display information. Current chapter number and Elapsed playing time = Current chapter number and Clock = Current title and chapter number = (back to the beginning) Current chapter numbe.
13 OPERATIONS After pressing M MODE, press the following buttons to... Disc type Skip 10 chapters (during play or pause) CHAPTER RPT : Repeat current chapter TITLE RPT : Repeat current title — Skip .
14 To search for chapter/title/program/playlist/folder/track directly (DVD/DivX/MPEG Video/MP3/ WMA/WAV/CD) 1 While holding SHIFT, press DIRECT repeatedly to select the desired search mode. DVD-Video : DVD-VR : DivX/MPEG Video : MP3/WMA/WAV : 2 While holding SHIFT, press the number buttons (0 – 9) to enter the desired number.
15 OPERATIONS Stop play Stop play Stop play Start play/Pause (if pressed during play) Start play/Pause (if pressed during play) Start play/Pause (if pressed during play) Reverse/forward track search * 1 • Forward slow motion * 2 during pause. (No sound can be heard.
16 Operations using the on-screen bar (DVD/DVD-VR/DivX/MPEG Video/VCD) These operations are possible on the monitor using the remote controller. 1 Show the on-screen bar (see page 17). 2 Select an item. 3 Make a selection. If pop-up menu appears... • To cancel pop-up menu, press RETURN.
17 OPERATIONS Information Operation On-screen bar Ex.: DVD-Video 1 Disc type 2 • DVD-Video/DTS-CD: Audio signal format type and channel • VCD: PBC 3 Playback mode * 1 DVD-Video: T. RPT : Title repeat C. RPT : Chapter repeat DVD-VR: C. RPT : Chapter repeat PG.
18 7 Track information 8 Track list with the current track selected To select a playback mode 1 While control screen is displayed... Playback mode selection screen appears on the folder list section of the control screen. 2 Select a playback mode. 3 Select an item.
19 OPERATIONS 3 Current page/total number of the pages included in the list 4 Current folder/track (highlighted bar) List screen (DVD-VR) You can use ORIGINAL PROGRAM or PLAY LIST screen anytime while playing DVD-VR with its data recorded. 1 Select a list screen.
20 Listening to the CD changer It is recommended to use a JVC MP3-compatible CD changer with your unit. You can connect a CD changer to the CD changer jack on the rear of the unit. • You can only play conventional CDs (including CD Text) and MP3 discs.
21 EXTERNAL DEVICES Listening to the iPod Before operating, connect the Interface adapter for iPod , KS-PD100 (separately purchased) to the CD changer jack on the rear of the unit. Preparation: Make sure “CHANGER” is selected for the external input setting, see page 25.
22 EXTERNAL DEVICES Listening to the other external components You can connect an external component to: • CD changer jack on the rear of this unit using the following adapters: – Line Input Adapter , KS-U57 – AUX Input Adapter , KS-U58 Preparation: Make sure “EXT INPUT” is selected for the external input setting, see page 25.
23 SETTINGS Selecting a preset sound mode You can select a preset sound mode suitable to the music genre (c-EQ: custom equalizer). Preset value setting for each sound mode Sound mode Preset value BASS.
24 3 Select or adjust the selected PSM item. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure. You can change PSM (Preferred Setting Mode) items listed in the table below and on page 25. 1 Enter the PSM settings. 2 Select a PSM item.
25 SETTINGS Indications Item ( : Initial) Setting, [reference page] SCROLL * 2 Scroll • ONCE • AUTO • OFF : Scrolls the displayed information once. : Repeats scrolling (at 5-second intervals). : Cancels. • Pressing DISP for more than one second can scroll the display regardless of the setting.
26 Disc setup menu These operations are possible on the monitor using the remote controller. 1 Enter the disc setup menu while stop. 2 Select a menu. 3 Select an item you want to set up.
27 SETTINGS Menu Item Setting PICTURE MONITOR TYPE Select the monitor type to watch a wide screen picture on your monitor. OSD POSITION Select the on-screen bar position on the monitor. • 1 : Higher position • 2 : Lower position (Guidance below the disc setup menu will disappear.
28 SETTINGS & REFERENCES Title assignment You can assign titles to 30 station frequencies (FM and AM) using 8 characters (maximum) for each title. 1 Select a station you want to assign a title (see also page 10). 2 Show the title entry screen. 3 Assign a title.
29 REFERENCES • After ejecting a disc, “NO DISC” appears and you cannot operate some of the buttons. Insert another disc or press SOURCE to select another playback source. Playing Recordable/Rewritable discs • This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder).
30 Changing the source • If you change the source, playback also stops (without ejecting the disc). Next time you select “DISC” for the playback source, disc play starts from where it has been stopped previously. iPod • You can control the following types of iPods through the interface adapter.
31 REFERENCES About sounds reproduced through the rear terminals • Through the analog terminals (Speaker out/LINE OUT): 2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are downmixed. DTS sound cannot be reproduced.
32 Output signals through the DIGITAL OUT terminal Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see page 27).
33 REFERENCES Language codes Code Language Code Language Code Language Code Language Code Language AA Afar FA Persian KK Kazakh NO Norwegian ST Sesotho AB Abkhazian FI Finnish KL Greenlandic OC Occita.
34 How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
35 REFERENCES Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptom Remedy/Cause General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
36 Symptom Remedy/Cause DivX/MPEG Video/MP3/WMA/WAV • Disc cannot be played back. • Change the disc. • Record the tracks using a compliant application in the appropriate discs (see page 4). • Add the extension code <.divx>, <.div>, <.
37 REFERENCES Symptom Remedy/Cause iPod • The iPod does not turn on or does not work. • Check the connecting cable and its connection. • Charge the battery. • Update the firmware version. • The sound is distorted. Deactivate the equalizer either on this unit or the iPod.
38 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
39 REFERENCES DVD/CD PLAYER SECTION Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: DVD, fs=48 kHz/96 kHz: 16 Hz to 22 000 Hz CD, fs=44.
© 2007 Victor Company of Japan, Limited EN 1207DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_KD-DV6406_005A_f.
1 KD-DV6406/KD-DV6405 Installation/Connection Manual GET0520-009A [A] 1207DTSMDTJEIN EN This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.
2 INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • Make sure not to block the fan on the rear to maintain proper ventilation when installing the unit.
3 B Connecting the parking brake wire When i nstal ling th e monito r in a locat ion whe re it can b e seen by t he driver Connect the parking brake wire to the parking brake system built in the car.
4 When connecting the external components, refer also to the manuals supplied for the components and adapter. CAUTION: Before connecting the external components, make sure that the unit is turned off. You can connect the following JVC components to the CD changer jack.
An important point after buying a device JVC KD-DV6406 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC KD-DV6406 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC KD-DV6406 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC KD-DV6406 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC KD-DV6406 will certainly help you make a decision on the purchase.
If you already are a holder of JVC KD-DV6406, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC KD-DV6406.
However, one of the most important roles played by the user manual is to help in solving problems with JVC KD-DV6406. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC KD-DV6406 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
