Instruction/ maintenance manual of the product HR-XVC40B JVC
Go to page of 37
HR-XVC40B HR-XVC41S DVD PLA YER & VIDEO CASSETTE RECORDER INSTRUCTIONS L VT1948-002A [C].
2 This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
3 1. Read these instructions. - All these safety and operating instructions should be read before the product is operated. 2. Keep these instructions. - The safety , operating and use instructions should be retained for future reference. 3. Heed all warnings.
4 Contents Introduction . . . . . . . . . . . . . . . . . . . . .5-9 Moisture Condensation . . . . . . . . . . . . . . . . . .5 Symbol Used in this Manual . . . . . . . . . . . . .5 About the Symbol Display . . . . . . . . . . . .5 Notes on Discs . . .
5 To ensure proper use of this product, please read this owner ’s manual carefully and retain it for future reference. This manual provides information on the operation and maintenance of your unit. Should the unit require service, contact an authorized service location.
6 T ypes of Playable Discs DVD (8 cm / 12 cm disc) V ideo CD (VCD) (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit plays DVD±R/RW and CD-R/R W that contains audio titles, MP3, WMA, DivX and/or JPEG files. This indicates a product feature that is capa- ble of playing DVD-RW discs recorded with V ideo Recording format.
7 Introduction The DVD deck is selected. A disc is in the DVD deck. (Lights when a disc is in the DVD deck and Flashes when no disc.) Indicates when the Progressive scan is active. Indicates repeat mode. The unit is in timer recording or a timer recording is programmed (VCR part only).
8 a 1 1 / / I (POWER) : Switches unit ON and OFF . TV/VCR : To view channels selected by the VCR tuner or by the TV tuner Z Z (OPEN/CLOSE, EJECT) : Opens and closes the disc tray . Ejects the tape in the VCR deck .
9 Introduction a ANT .IN Connect the VHF/UHF/CA TV antenna to this terminal. b VCR IN LINE 1 (VIDEO/AUDIO (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/Monitor , VCR, Camcorder). c DVD/VCR OUT (VIDEO/AUDIO (Left/Right)) Connect to a TV with video and audio inputs.
10 Connecting an Connecting an Antenna Antenna or Cable TV or Cable TV a a Antenna : Disconnect the antenna from the rear of the TV and identify the antenna cable. If it is a round 75 ohm coaxial cable connect it directly to the jack marked ANT .IN on your DVD+VCR.
11 Preparation How to set the DVD+VCR’ s RF output channel 1. When the DVD+VCR is turned off, press and hold CH (+/-) on the front panel for more than five sec- onds. “RF03” or “RF04” appears in the display window . 2. Press CH (+/-) to change the RF output channel (RF03 or RF04).
12 Connection to an Amplifier Y ou can only listen to DVD playback using COAXIAL (X) and AUDIO OUT (A2) connections. The VCR will still be heard through the DVD/VCR AUDIO OUT (A1) jack.
13 Preparation Initial Settings - VCR Initial Settings - VCR By using the VCR Setup menu, you can make various adjustments to items such as clock setting, and timer recordings. Y our DVD+VCR allows remote control adjustment of several features. General Operation 1.
14 TUNING This DVD+VCR is equipped with a frequency synthe- sized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CA TV channels 1-125. Auto Channel Programming 1. Choose the SOURCE SELECT option, then use b / B to select TUNER.
15 Preparation Displaying Disc Information Displaying Disc Information on-screen - DVD on-screen - DVD Y ou can display various information about the disc loaded on-screen. 1. Press DISPLA Y to show various playback infor- mation. The items displayed differ depending on the disc type or playing status.
16 LANGUAGE Menu Language Select a language for the VCR and DVD’s setup menu and information display . Disc Audio / Subtitle / Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. Original : Refers to the original language in which the disc was recorded.
17 Preparation AUDIO Each DVD disc has a variety of audio output options. Set this unit’s AUDIO options according to the type of audio system you use. Dolby Digital / DTS / MPEG Bitstream: Select “Bitstream” if you connect the DVD+VCR’s DIGIT AL AUDIO OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder .
18 4. Press ENTER (OK) to confirm your rating selec- tion, then press SETUP MENU to exit the menu. 5. Press Z (OPEN/CLOSE) to activate parental control. Password (Security Code) Y ou can enter or change password. 1. Select “Password” on the LOCK menu then press B .
19 Preparation Remote Control Function Remote Control A/B/C Code Switching The remote control is capable of controlling three JVC video units independently . Each of the units can respond to one of three codes (A, B or C). The remote control is preset to send C code signals because your unit is initially set to respond to C code signals.
20 This chapter describes how to operate the VCR and DVD. VCR T ape Playback Press the VCR button to select the device to be operated. Basic Instructions 1.
21 Operation CM SKIP (Commercial Skip) This feature is useful for skipping commercials or short program segments. 1. Press in playback mode. The unit performs a fast forward picture search through 30 seconds of recording. 2. Press again to extend the search time by an addition 30 seconds.
22 VCR T VCR T ape Recording ape Recording Basic Instructions 1. Turn on the DVD+VCR and TV . 2. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or if a direct VIDEO/AUDIO connec- tion is made between the DVD+VCR and the TV , set the TV’ s source selector to VIDEO.
23 Operation CHANNEL: Select a TV channel, LINE1 or LINE2. If you have CABLE TV and use a cable box (con- verter) you must set the channel to match the cable box output channel (usually CH 3 or 4). Change channels on the cable box instead of with the DVD+VCR.
24 Basic Recording (One-T ouch Recording) Y ou can record from an external component, such as a camcorder or VCR, connected to any of the unit’s external inputs. 1. Make sure that the component you want to record from is connected properly to the unit.
Operation 25 Copying from DVD to VCR Y ou can copy the contents of a DVD to a VHS tape. 1. Insert the disc you wish to copy into the DVD deck and close the disc tray . 2. Insert a blank VHS video tape into the VCR deck. 3. Find the place on the DVD from which you want to start dubbing using the PLA Y , FF , REW and P AUSE functions.
26 Additional VCR Information Additional VCR Information • During manual recording, timer recording, Instant T imer Recording, playback, or fast forward modes, the DVD+VCR automatically starts rewinding the tape at the end of the tape. The cassette stops at the beginning of the tape and is ejected.
27 Operation Operations - DVD Playback Setup Playback Setup T urn the TV on and select the video input source connected to this unit. Audio System: T urn the Audio System on and select the input source connected to this unit. 1. Press Z (OPEN/CLOSE) to open the disc tray .
28 Buttons Operations RANDOM During playback or in stop mode, press RANDOM for ran- dom playback. TITLE If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may appears. DISC MENU The disc menu appears on the screen.
29 Operation Playing an Playing an Audio CD or Audio CD or MP3/WMA MP3/WMA file file This unit can play Audio CDs or MP3/WMA files recorded media. MP3/ WMA/ Audio CD Once you insert an MP3/WMA files recorded media or Audio CD, a menu appears on the TV screen.
30 V V iewing a JPEG Disc iewing a JPEG Disc Using this DVD+VCR you can view discs with JPEG files. 1. Insert a disc and close the tray . The PHOTO menu appears on the TV screen. 2. Press v / V to select a folder , and press ENTER (OK). A list of files in the folder appears.
31 Operation Playing a DivX Movie file Playing a DivX Movie file Using this DVD+VCR, you can play DivX file. 1. Insert a DivX file recorded media. The MOVIE menu appears on the TV screen. 2. Press v / V to select a folder , and press . A list of files in the folder appears.
32 Playing a DVD VR format Playing a DVD VR format Disc Disc This unit will play DVD-R/RW discs recorded using the DVD-Video format that have been finalized using a DVD-recorder . • This unit will play DVD-RW discs recorded using the Video Recording (VR) format.
33 Operation Reference Language Code Abkhazian 6566 Afar 6565 Afrikaans 6570 Albanian 8381 Ameharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 A ymara 6588 Azerbaijani 6590 Bashkir 6665 Basque 6985 .
34 T T roubleshooting roubleshooting Symptom No power . The power is on, but the DVD+VCR does not work. No picture. No sound. The playback picture is poor . The “PROGRESSIVE SCAN MODE” message remains to be displayed. Cause The power cord is disconnected.
35 Reference Symptom The DVD+VCR does not start playback. V ideo tape cannot be inserted. No Hi-Fi sound The remote control does not work properly . Camcorder image is not shown. Camcorder image via AV input to DVD+VCR is not shown on TV screen. T imer recording is not possible.
36 General Power requirements 120V , 60 Hz Power consumption 16 W Dimensions (approx.) 16.9" X 3.1" X 10.4" (430 X 78.5 X 265 mm) (w x h x d) W eight (approx.
HR-XVC40B / HR-XVC41S 0608SKMLGEEGL EN.
An important point after buying a device JVC HR-XVC40B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC HR-XVC40B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC HR-XVC40B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC HR-XVC40B you will learn all the available features of the product, as well as information on its operation. The information that you get JVC HR-XVC40B will certainly help you make a decision on the purchase.
If you already are a holder of JVC HR-XVC40B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC HR-XVC40B.
However, one of the most important roles played by the user manual is to help in solving problems with JVC HR-XVC40B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC HR-XVC40B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
