Instruction/ maintenance manual of the product Mio Modero R-3 AMX
Go to page of 34
Operation/Reference Guide Mio Remote Controls Mio Modero ® R-3 Remote Control Device Last Updated: 1/29/200 8.
AMX Limited Warranty and Disclaimer AMX warrants its products to be free of defects in material and workmanship under n ormal use for three (3) years from the date of purchase fr om AMX, with the foll.
Table of Contents i Mio Modero R-3 Rem ote Table of Contents Overview ...................... ...................................................................... ................ 1 The Mio Modero® R-3 ......................... .....................
ii Mio Moder o R-3 Remote Table of Contents.
Overview 1 Mio Moder o R-3 Remote Overview The Mio Modero ® R-3 The Mio Modero ® R-3 remote provides custom control features, contained in an elegant handheld rechargeable de vice. The Mio R-3 co mmunicates with a NetLinx ® ma ster via a wireless Zigbee® network.
Overview 2 Mio Modero R-3 Remote Touch And Tilt Sensor The Mio R-3 wakes up upon touching either the chrome side rails or pressing a button. When the remote times out while holding it, you can reaw aken the de vice by tilting it. Errant jostling, such as a b umped table, will not wake the device unless you are actually holding it.
Overview 3 Mio Moder o R-3 Remote FCC Compliance This radio module was tested and certif ied as a stand-alone device according to FCC Rules CFR 47, Part 15, Subpart C.
Overview 4 Mio Modero R-3 Remote.
Mio Modero R-3 Setup 5 Mio Moder o R-3 Remote Mio Modero R-3 Setup Inserting or Replacing the Li thium-ion Battery for the Mio R-3 The Mio Modero R-3 comes with a rechargeable Lithiu m-Ion battery that needs to be installed before use. T o install your Lithium-Ion ba ttery into the device: 1.
Mio Modero R-3 Setup 6 Mio Modero R-3 Remote Installing Custom Buttons 1. Flip and turn the Mio R-3 de vice so that the buttons are facing aw ay from you and the device is upside down. 2. Holding the Mio R-3 in both hands, place your thumbs on the battery door and push up to slide the battery door free.
Setup Mode 7 Mio Modero R-3 Remote Setup Mode The Setup mode allows you to set the following de vice features on the Mio R-3: T ransmit Mode T imeout Adjustment Download Mode Debug Mod.
Setup Mode 8 Mio Modero R-3 Remote Download Mode In order to do wnload new f irmware or a new conf iguration or font file to the Mio R-3 remote using the remote's program port (see Using the Pr ogr amming Jac k on The Mio R-3 section on pag e 11 for de tails), the remote must first be placed into Download mode.
Setup Mode 9 Mio Modero R-3 Remote LED Sleep Mode Brightness The red LEDs that backlight the Po wer button when the remote is awak e are also used to indicate charging status. These LEDs will slo wly blink on and of f if the remote is place in the char ging cradle and the Lithium-Ion battery pack is being charged.
Setup Mode 10 Mio Modero R-3 Remote.
Programming The Mio R-3 11 Mio Modero R-3 Remote Programming The Mio R-3 Most functionality of the Mio R-3 is handled using the Ke ypadBuilder application. Go to www .amx.com for the K e ypadBuilder Instruction Manual . The Mio R-3 recognizes a select number o f Serial Commands.
Programming The Mio R-3 12 Mio Modero R-3 Remote Updating Mio R-3 Firmware Updating firmware in the Mio R-3 is also done through the programming jac k. T o update the main firmw are for the Mio R-3: 1. Connect the Mio R-3 to your computer via the programming jack (FIG.
Programming The Mio R-3 13 Mio Modero R-3 Remote Channel Codes The following table gi ves the channel codes associated with each button on the Mio R-3. Thirty-six of the buttons change channel codes based on what b utton was last pressed. Nine of the b uttons always emit the same channel code regardless of what b utton was last pressed.
Programming The Mio R-3 14 Mio Modero R-3 Remote Channel Codes (Cont.) B ut t o n Dev 1 D ev 2 D ev 3 D ev 4 D ev 5 D ev 6 Up 32 72 1 12 152 192 232 Down 33 73 1 13 153 193 233 Left 34 74 1 14 154 194.
Programming The Mio R-3 15 Mio Modero R-3 Remote Serial Commands The Mio R-3 remote supports a few commands that can be uploaded to the device using a terminal program such as HyperT erminal. These comman ds ar e not needed for normal usage or programming of the remote.
Programming The Mio R-3 16 Mio Modero R-3 Remote Serial Commands (Cont.) ^FML ^FML S Sets a line of the display to a menu line Syntax: "'^FML-<variable text address range>,S'".
Programming The Mio R-3 17 Mio Modero R-3 Remote Serial Commands (Cont.) IRMODE # Sets the IR transmission frequency to either 38 or 455KHz Syntax: IRMODE # V ariables: • < mode> = 38 - IR onl.
Programming The Mio R-3 18 Mio Modero R-3 Remote Serial Commands (Cont.) REVD # Reverse the image on the LCD Syntax: REVD # V ariables: • # = (1 = R everse video, 0 = Normal Video) Example: REVD 1 Reverses the image on the LCD; pixels pr eviously lit go off; pixels previously off, come on.
Programming The Mio R-3 19 Mio Modero R-3 Remote Serial Commands (Cont.) @SST Sends a string to the master upon startup Syntax: "'@SST-<new text>'" V ariables: • new te xt = 1 - 20 ASCII characters. Default string is ST ARTUP .
Programming The Mio R-3 20 Mio Modero R-3 Remote Serial Commands (Cont.) ZAP! Erase Configuration Information in Flash Memory Syntax: ZAP! t V ariables: • t = MENU or FONT or blank Example: ZAP! Clears all configuration information and erases the font.
Programming The Mio R-3 21 Mio Modero R-3 Remote Send_Commands When used with ZigBee communications and a NetL inx master , the Mio R-3 supports a small set of Send_Commands.
Programming The Mio R-3 22 Mio Modero R-3 Remote Send_Commands (Cont.) ^FML ^FML S Sets a line of the display to a menu line Syntax: "'^FML-<variable text address range>,S'" V ariables: • variable text address range = 1; th e address range corresponds to the dynamic line number-o nly one line is supported on this device.
Programming The Mio R-3 23 Mio Modero R-3 Remote Send_Commands (Cont.) ^JST Set text alignment using a numeric keypad layout for those buttons with a defined address range Syntax: '^JST-<varia.
Programming The Mio R-3 24 Mio Modero R-3 Remote Send_Commands (Cont.) SLEEP Set the Sleep timer or put the remote to sleep immediately . This command can be used if a sleep time ot her than 3, 6, 9, or 12 seconds is desired. Syntax: SLEEP Forces keypad to turn backlight off.
Programming The Mio R-3 25 Mio Modero R-3 Remote Send_Commands (Cont.) ^TXT Assign a text string to those buttons with a defined address range Sets non-unicode text. Syntax: SEND_COMMAND <DEV>,"'^TXT-<vt addr range>,<button states range>,<new text>'" V ariables: • variable text address range = 1.
Programming The Mio R-3 26 Mio Modero R-3 Remote.
Mio Remote Charging Base 27 Mio Moder o R-3 Remote Mio Remote Charging Base The Mio remotes are complemented with a Mio-RCC charging base ( FG147-02) .
Mio Remote Charging Base 28 Mio Modero R-3 Remote The specifications for the Mio remote char ging base and kit are as follo ws: Charging The Mio Remote with Charging Base The Mio remotes receiv e power for charging from a char ging base.
Mio Remote Charging Base 29 M io Modero R-3 R emote.
1/08 © 2007 AMX. Al l rights reserved. AMX a nd the AMX logo a re register ed trademarks of AM X. AMX reserves the right to alter specific ations without notice at any time. It’s Your World - Take Con trol™ 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 USA • 800.
An important point after buying a device AMX Mio Modero R-3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AMX Mio Modero R-3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AMX Mio Modero R-3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AMX Mio Modero R-3 you will learn all the available features of the product, as well as information on its operation. The information that you get AMX Mio Modero R-3 will certainly help you make a decision on the purchase.
If you already are a holder of AMX Mio Modero R-3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AMX Mio Modero R-3.
However, one of the most important roles played by the user manual is to help in solving problems with AMX Mio Modero R-3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AMX Mio Modero R-3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
