Instruction/ maintenance manual of the product GET0200-001A JVC
Go to page of 124
GET0199-001A [E/EX] KD-G801/KD-G701 CD RECEIVER CD-RECEIVER RECEPTEUR CD CD-RECEIVER ENGLISH DEUTSCH NEDERLANDS FRANÇAIS For installation and connections, refer to the separate manual. Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
2 ENGLISH How to reset your unit Press the reset button on the control panel using a ball-point pen or similar tool. This will reset the built-in microcomputer . Note: Y our pr eset adjustments—such as pr eset channels or sound adjustments—will also be erased.
3 ENGLISH Thank you f or purchasing a JVC product. Please read all instructions carefully before oper ation, to ensure your complete understanding and to obtain the best possib le performance from the unit. How to reset your unit .....................
ENGLISH 4 KD-G801 KD-G701 KD-G801 KD-G701 LOCA TION OF THE BUTTONS Display window f Disc information indicators— (trac k/file), T AG (ID3 T ag), (folder) g MP3 indicator h Only for KD-G801: CH (CD c.
ENGLISH 5 Remote controller 3 • Selects the preset stations (or services * ) while listening to the radio (or the D AB tuner * ). Each time you press the b utton, the preset station (or service * ) number increases, and the selected station (or service * ) is tuned in.
ENGLISH 6 Preparing the remote controller Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. • Do not expose the remote sensor to strong light (direct sunlight or ar tificial lighting).
7 ENGLISH 4 Adjust the sound as you want. (See pages 31 – 33.) T o drop the volume in a moment Press briefly while listening to any source. “A TT” star ts flashing on the display , and the volume le vel will drop in a moment. T o resume the previous v olume level, press the button briefly again.
8 ENGLISH Canceling the display demonstration When shipped from the factory , display demonstration has been activ ated, and star ts automatically when no operations are done f or about 20 seconds. • It is recommended to cancel the displa y demonstration bef ore you use the unit for the first time.
9 ENGLISH 4 Set the cloc k system. 1 Select “ CLOCK24H/12H. ” 2 Select “ CLOCK 24HOUR ” or “ CLOCK 12HOUR. ” 12 5 Finish the setting. Note: T o show the cloc k time on the display , see page 36. T o chec k other information during pla y , press DISP (display).
10 ENGLISH RADIO OPERA TIONS Listening to the radio Y ou can use either automatic searching or manual searching to tune in to a par ticular station. Searching for a station automatically: Auto search 1 Select the band (FM1 – 3, AM).
11 ENGLISH 2 Press and hold ¢ or 4 until “M” (manual) starts flashing on the display . 3 T une in to a station you want while “M” (manual) is still flashing. • If you release y our finger from the button, the manual mode will automatically turns off after 5 seconds.
12 ENGLISH Manual preset Y ou can preset up to 6 stations in each band (FM1, FM2, FM3, and AM) manually . Ex.: Storing FM station of 92.5 MHz into the preset number 1 of the FM1 band. 1 Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).
13 ENGLISH T uning in to a preset station Y ou can easily tune in to a preset station. Remember that you must store stations first. If you ha ve not stored them y et, see “Storing stations in memory” on pages 11 – 13. 1 Select the band (FM1 – 3, AM).
14 ENGLISH RDS OPERA TIONS What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals . For e xample, the stations send their station names, as well as inf or mation about what type of programme the y broadcast, such as spor ts or music, etc.
15 ENGLISH 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the displa y . (PSM: see pages 34 and 35.) 2 Select “AF-REG” (alternative frequency/regionalization reception) if not shown on the displa y . 3 Select the desired mode—“AF ON, ” “AF REG, ” or “AF OFF .
16 ENGLISH Using PTY Standby Reception PTY Standby Reception allo ws the unit to switch temporarily to your f a vorite programme (PTY : Programme T ype) from the current source (another FM station, CD , or other connected components). • PTY Standby Reception will not work if you ar e listening to an AM station.
17 ENGLISH Searching your favorite programme Y ou can search any one of the PTY codes . In addition, you can store y our 6 f av orite programme types in the n umber buttons. When shipped from the factory , the following 6 programme types ha ve been stored in the number buttons (1 to 6).
18 ENGLISH 3 Press ¢ or 4 to start PTY search f or your fav orite programme. • If there is a station broadcasting a programme of the same PTY code as you selected, that station is tuned in. • If there is no station broadcasting a programme of the same PTY code as y ou selected, the station will not change.
19 ENGLISH Setting the T A volume level Y ou can preset the v olume le vel f or T A Standb y Reception. When a tr affic programme is receiv ed, the volume le vel automatically changes to the preset le vel. • See also “ Changing the gener al settings (PSM) ” on pages 34 and 35.
20 ENGLISH PTY codes NEWS: News AFF AIRS: T opical programmes e xpanding on current news or aff airs INFO: Programmes which impart advice on a wide variety of topics SPORT : Spor t ev ents EDUCA TE: E.
21 ENGLISH CD OPERA TIONS Refer to “MP3/WMA OPERA TIONS” on pages 26 to 30 for oper ating MP3/WMA discs. Playing a CD 1 Open the control panel. Note on One-T ouch Operation: When a CD is alr eady in the loading slot, pr essing CD/CD-CH (for KD-G801) or CD (for KD-G701) turns on the unit and starts playback automatically .
22 ENGLISH T o go to the next or previous tracks T o go to a particular track directly Press the number b utton corresponding to the trac k number to star t its pla yback.
23 ENGLISH How to use the +10 and –10 b uttons • Ex. 1: T o select trac k number 32 while playing tr ack n umber 6 • Ex. 2: T o select trac k number 8 while playing trac k number 36 Selecting CD playback modes T o play back tracks at random (Disc Random Play) Y ou can pla y bac k all tracks on the CD at random.
24 ENGLISH Prohibiting disc ejection Y ou can prohibit disc ejection and can loc k a disc in the loading slot. While pressing CD/CD-CH (for KD-G801) or CD (for KD-G701), press and hold for more than 2 seconds. “ NO EJECT ” flashes on the display for about 5 seconds, and the disc is loc ked and cannot be ejected.
25 ENGLISH MP3/WMA INTRODUCTION What are MP3/WMA? MP3 is an abbre viation of Motion Picture Exper ts Group (or MPEG) Audio La yer 3. MP3 is simply a file format with a data compression ratio of 1:10 (128 Kbps*). WMA (Windows Media ® A udio) is the digital audio compression format de veloped b y Microsoft Corporation.
26 ENGLISH Refer also to “CD OPERA TIONS” on pages 21 to 24. Playing a disc 1 Open the control panel. Note on One-T ouch Operation: When a disc is alr eady in the loading slot, pr essing CD/CD-CH (for KD-G801) or CD (for KD-G701) turns on the unit and starts playback automatically .
27 ENGLISH T o stop play and eject the disc Press 0 . Playbac k stops and the control panel moves down. The disc automatically ejects from the loading slot. T o change the display information While pla ying back an MP3/WMA file , you can change the disc information shown on the displa y .
28 ENGLISH File 36 30 20 10 9 8 (Three times) (T wice) T o go to a particular folder directly IMPORT ANT: T o directly select the folders using the n umber button(s), it is required that f olders are assigned 2 digit numbers at the beginning of their f older names.
29 ENGLISH T o skip to the next or previous folder Note: If the folder does not contain any MP3/WMA files, it is skipped. Press 5 (up) while playing a disc to skip to the ne xt folder . Each time you press the b utton consecutively , the ne xt folder is located (and the first file in the folder starts playing, if recorded).
30 ENGLISH T o play back only intros (T rack Intro Scan/Folder Intro Scan) Y ou can pla y bac k the first 15 seconds of each file sequentially . 1 Press MODE to enter the functions mode while pla ying a disc. 2 Press INT (intro), while “ MODE ” is still on the displa y , so that “ TRK INT ” or “ FLDR INT ” appears on the display .
31 ENGLISH SOUND ADJUSTMENTS Adjusting the sound Y ou can adjust the sound characteristics to y our preference . 1 Select the item you want to adjust. Each time you press the button, the adjustab le items change as follo ws: For KD-G801: For KD-G701: Indication T o do: Range FA D * 1 Adjust the front R06 (Rear only) and rear speaker | balance.
32 ENGLISH Selecting preset sound modes (iEQ: intelligent equalizer) Y ou can select a preset sound mode (iEQ: intelligent equalizer) suitab le to the music genre. • There is a time limit in doing the f ollowing procedure. If the setting is canceled bef ore you finish, star t from step 1 again.
33 ENGLISH Storing your own sound adjustments Y ou can adjust the sound modes to y our preference and store y our own adjustments in memor y (USER 1, USER 2 and USER 3). • There is a time limit in doing the f ollowing procedure. If the setting is canceled bef ore you finish, star t from step 1 again.
34 ENGLISH DEMO MODE Displa y demonstration CLOCK HOUR Hour adjustment CLOCK MINUTE Minute adjustment CLOCK24H/12H 24/12-hour time displa y A UTO ADJUST Automatic cloc k setting CLOCK DISP Clock displ.
35 ENGLISH FREQ MID FREQ HIGH FREQ MID 37 38 HIGH POWER 38 T AG DISP OFF T AG DISP ON T A G DISP ON LOW PO WER HIGH POWER FREQ LOW LEVEL 1 LEVEL 2 LEVEL 1 3 6 DIMMER AU TO 36 EQ & LEVEL SILENT DIM.
36 ENGLISH T o select the level meter—LEVELMETER Y ou can select the le v el meter display according to your pref erence. When shipped from the f actory , this mode is set to “LEVEL 1. ” • LEVEL 1/LEVEL 2: Display the audio le v el meter with diff erent illumination pattern.
37 ENGLISH T o select the telephone muting — TELEPHONE This mode is used when a cellular phone system is connected. Depending on the phone system used, select either “MUTING 1” or “MUTING 2, ” whichev er mutes the sounds from this unit. When shipped from the factory , this mode is deactivated.
38 ENGLISH T o select the amplifier gain control — AMP .GAIN Y ou can change the maximum v olume level of this unit. When the maxim um power of the speakers is less than 50 W , select “LO W PO WER” to pre vent them from being damaged. When shipped from the f actor y , “HIGH PO WER” is selected.
39 ENGLISH Assigning names to CDs Y ou can assign names to CDs (both in this unit and in the CD changer—only for KD-G801). After assigning a name, it will appears on the displa y when you select the source. Source Maximum number of c haracters CDs* Up to 32 characters (up to 40 discs) * Y ou cannot assign a name to a CD T ext or an MP3/WMA disc.
40 ENGLISH Changing the control panel angle Y ou can change the angle of the control panel in four positions . 1 Press and hold (angle) until the angle adjustment screen appears. 2 Press (angle) repeatedly to adjust the angle to the position y ou want.
41 ENGLISH Attaching the control panel 1 Insert the left side of the control panel into the groo ve on the panel holder . 2 Press the right side of the control panel to fix it to the panel holder . Note on cleaning the connectors: If you fr equently detach the contr ol panel, the connectors will deteriorate .
42 ENGLISH CD CHANGER OPERA TIONS Playing discs Select the CD changer (CD-CH). * If you have changed “EXTERN AL IN” setting to “LINE IN” (see page 38), you cannot select the CD changer . • When the current disc is an MP3 disc: Playbac k star ts from the first folder of the current disc once file check is completed.
43 ENGLISH T o go to a particular disc directly Press the number b utton corresponding to the disc number to start its playback (while the CD changer is playing). • T o select a disc number from 1 – 6: Press 1 (7) – 6 (12) briefly . • T o select a disc number from 7 – 12: Press and hold 1 (7) – 6 (12) f or more than one second.
44 ENGLISH (Three times) (T wice) (Three times) (T wice) T o skip to the next or previous folder (only for MP3 discs) T o show the disc information for CD T ext and MP3 discs This is possible only when connecting a JVC CD changer equipped with CD T e xt and/or MP3 disc information reading capability .
45 ENGLISH Selecting the playback modes T o play back tracks/files at random (Folder Random/Disc Random/Magazine Random Play) 1 Press MODE to enter the functions mode while pla ying a disc. 2 Press RND (random), while “ MODE ” is still on the displa y .
46 ENGLISH Mode Active Plays repeatedl y indicator TRK RPT RPT indicator The current (or lights up. specified) track/file. FLDR RPT* and RPT All files of the indicators current (or specified) light up . folder of the current disc. DISC RPT and RPT All tr acks/files of the indicators current (or specified) light up .
47 ENGLISH EXTERNAL COMPONENT OPERA TIONS This section is only f or KD-G801. Playing an external component Y ou can connect the e xternal component to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied).
48 ENGLISH DAB TUNER OPERA TIONS T uning in to an ensemble and one of the services A typical ensemble has 6 or more prog rammes (services) broadcast at the same time. After tuning in to an ensemble , you can select a service you want to listen to . Before y ou star t.
49 ENGLISH 3 Start searching f or an ensemble. When an ensemble is receiv ed, searching stops. T o stop searc hing before an ensemb le is received, press the same button y ou have pressed f or searching. 4 Select a service (either primary or secondary) you want to listen to.
50 ENGLISH 3 T une in to an ensemble you want. 4 Select a service of the ensemble y ou want to listen to. 5 Press and hold the number b utton (in this example, 1) for more than 2 seconds to store the selected service into the preset number y ou want. 6 Repeat the abo ve procedure to store other D AB services into other preset number s.
51 ENGLISH What you can do more with DAB T racing the same programme automatically (Alternative Reception) Y ou can k eep listening to the same programme .
52 ENGLISH Sound modes (preset frequency level settings) The list below shows the preset frequency le vel settings f or each sound mode. Sound modes Preset equalizing values LOW LOW LOW MID MID HI HI .
53 ENGLISH TROUBLESHOOTING What appears to be trouble is not alw a ys serious. Check the follo wing points bef ore calling a service center . Remedies Adjust it to the optimum le vel. Check the cords and connections. Press the reset button on the control panel.
54 ENGLISH Remedies Change the disc. Add the extension code <.mp3> or <.wma> to their file names. Change the disc. (Record MP3/WMA files using a compliant application.) Skip to another file or change the disc. (Do not add the extension code <.
55 ENGLISH Remedies Inser t discs into the magazine. Inser t discs correctly . Inser t the magazine. Connect this unit and the CD changer correctly and press the reset button of the CD changer . Press the reset button of the CD changer . Press the reset button on the control panel.
56 ENGLISH MAINTENANCE Center holder Handling discs This unit has been designed to reproduce CDs, CD-Rs (Recordable), CD-R Ws (Re writable), and CD T exts .
57 ENGLISH SPECIFICA TIONS AUDIO AMPLIFIER SECTION Maximum P ower Output: F ront: 50 W per channel Rear: 50 W per channel Continuous P ower Output (RMS): F ront: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distor tion.
EN, GE, FR, NL 0104KKSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück Sieh.
5 ! Ÿ ~ @ ⁄ ¤ 53 mm 184 mm 4 3 2 1 KD-G801/KD-G701 Installation/Connection Manual Einbau/Anschlußanleitung Manuel d’installation/raccordement Handleiding voor installatie/aansluiting 0104KKSMDTJEIN EN, GE, FR, NL GET0199-005A [E/EX] T eileliste für den Einbau und Anschluß Die folgenden T eile werden zusammen mit diesem Gerät geliefert.
2 TROUBLESHOOTING • The fuse blows. * Are the red and blac k leads connected correctly? • P ower cannot be turned on. * Is the yello w lead connected? • No sound from the speaker s. * Is the speaker output lead short-circuited? • Sound is distorted.
1 * 1 * 1 (ILLUMINATION) 1 2 3 5 7 6 4 3 2 15 B1 B3 B5 B7 B2 B4 B6 B8 A5 A7 A2 A4 A8 A6 B1 B3 B5 B7 B2 B4 B6 B8 A5 A7 A2 A4 A8 A6 A8 A7 A5 A4 A2 B5 B6 B4 B3 B8 B7 B2 B1 A6 3 * 2 Before checking the operation of this unit prior to installation, this lead must be connected, otherwise power cannot be tur ned on.
L R L R L L R R L L R L R INPUT R L R LINE REAR FRONT OUT L R L R L INPUT * 3 * 3 R 4 Y ou can connect an amplifier (and other equipment) to upgrade y our car stereo system. • Connect the remote lead (b lue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
GET0200-001A [EE] INSTR UCTIONS ИНСТР УКЦИИ ПО ЭК СПЛУ А Т АЦИИ KD-G807 CD RECEIVER РЕСИВЕР С ПРОИГРЫВ А ТЕЛЕМ К ОМПАКТ -ДИСК ОВ ENGLISH Р УCCKИЙ For installation and connections, refer to the separate manual.
2 ENGLISH How to reset your unit Press the reset button on the control panel using a ball-point pen or similar tool. This will reset the built-in microcomputer . Note: Y our pr eset adjustments—such as pr eset channels or sound adjustments—will also be erased.
3 ENGLISH Thank you f or purchasing a JVC product. Please read all instructions carefully before oper ation, to ensure your complete understanding and to obtain the best possib le performance from the unit. How to reset your unit .....................
ENGLISH 4 KD-G807 LOCA TION OF THE BUTTONS d ∞ (down) b utton –10 button Display window f Disc information indicators— (trac k/file), T AG (ID3 T ag), (folder) g MP3 indicator h CH (CD changer) .
ENGLISH 5 Remote controller 3 • Selects the preset stations (or services) while listening to the radio (or the D AB tuner). Each time you press the b utton, the preset station (or service) number increases, and the selected station (or service) is tuned in.
ENGLISH 6 Preparing the remote controller Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. • Do not expose the remote sensor to strong light (direct sunlight or ar tificial lighting).
7 ENGLISH 4 Adjust the sound as you want. (See pages 31 – 33.) T o drop the volume in a moment Press briefly while listening to any source. “A TT” star ts flashing on the display , and the volume le vel will drop in a moment. T o resume the previous v olume level, press the button briefly again.
8 ENGLISH Canceling the display demonstration When shipped from the factory , display demonstration has been activ ated, and star ts automatically when no operations are done f or about 20 seconds. • It is recommended to cancel the displa y demonstration bef ore you use the unit for the first time.
9 ENGLISH 4 Set the cloc k system. 1 Select “ CLOCK24H/12H. ” 2 Select “ CLOCK 24HOUR ” or “ CLOCK 12HOUR. ” 12 5 Finish the setting. Note: T o show the cloc k time on the display , see page 36. T o chec k other information during pla y , press DISP (display).
10 ENGLISH RADIO OPERA TIONS Listening to the radio Y ou can use either automatic searching or manual searching to tune in to a par ticular station. Searching for a station automatically: Auto search 1 Select the band (FM1 – 3, AM).
11 ENGLISH 2 Press and hold ¢ or 4 until “M” (manual) starts flashing on the display . 3 T une in to a station you want while “M” (manual) is still flashing. • If you release y our finger from the button, the manual mode will automatically turns off after 5 seconds.
12 ENGLISH Manual preset Y ou can preset up to 6 stations in each band (FM1, FM2, FM3, and AM) manually . Ex.: Storing FM station of 92.5 MHz into the preset number 1 of the FM1 band. 1 Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).
13 ENGLISH T uning in to a preset station Y ou can easily tune in to a preset station. Remember that you must store stations first. If you ha ve not stored them y et, see “Storing stations in memory” on pages 11 – 13. 1 Select the band (FM1 – 3, AM).
14 ENGLISH RDS OPERA TIONS What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals . For e xample, the stations send their station names, as well as inf or mation about what type of programme the y broadcast, such as spor ts or music, etc.
15 ENGLISH 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the displa y . (PSM: see pages 34 and 35.) 2 Select “AF-REG” (alternative frequency/regionalization reception) if not shown on the displa y . 3 Select the desired mode—“AF ON, ” “AF REG, ” or “AF OFF .
16 ENGLISH Using PTY Standby Reception PTY Standby Reception allo ws the unit to switch temporarily to your f a vorite programme (PTY : Programme T ype) from the current source (another FM station, CD , or other connected components). • PTY Standby Reception will not work if you ar e listening to an AM station.
17 ENGLISH Searching your favorite programme Y ou can search any one of the PTY codes . In addition, you can store y our 6 f av orite programme types in the n umber buttons. When shipped from the factory , the following 6 programme types ha ve been stored in the number buttons (1 to 6).
18 ENGLISH 3 Press ¢ or 4 to start PTY search f or your fav orite programme. • If there is a station broadcasting a programme of the same PTY code as you selected, that station is tuned in. • If there is no station broadcasting a programme of the same PTY code as y ou selected, the station will not change.
19 ENGLISH Setting the T A volume level Y ou can preset the v olume le vel f or T A Standb y Reception. When a tr affic programme is receiv ed, the volume le vel automatically changes to the preset le vel. • See also “ Changing the gener al settings (PSM) ” on pages 34 and 35.
20 ENGLISH PTY codes NEWS: News AFF AIRS: T opical programmes e xpanding on current news or aff airs INFO: Programmes which impart advice on a wide variety of topics SPORT : Spor t ev ents EDUCA TE: E.
21 ENGLISH CD OPERA TIONS Refer to “MP3/WMA OPERA TIONS” on pages 26 to 30 for oper ating MP3/WMA discs. Playing a CD 1 Open the control panel. Note on One-T ouch Operation: When a CD is alr eady in the loading slot, pr essing CD/CD-CH turns on the unit and starts playback automatically .
22 ENGLISH T o go to the next or previous tracks T o go to a particular track directly Press the number b utton corresponding to the trac k number to star t its pla yback.
23 ENGLISH How to use the +10 and –10 b uttons • Ex. 1: T o select trac k number 32 while playing tr ack n umber 6 • Ex. 2: T o select trac k number 8 while playing trac k number 36 Selecting CD playback modes T o play back tracks at random (Disc Random Play) Y ou can pla y bac k all tracks on the CD at random.
24 ENGLISH Prohibiting disc ejection Y ou can prohibit disc ejection and can loc k a disc in the loading slot. While pressing CD/CD-CH, press and hold for more than 2 seconds. “ NO EJECT ” flashes on the display for about 5 seconds, and the disc is loc ked and cannot be ejected.
25 ENGLISH MP3/WMA INTRODUCTION What are MP3/WMA? MP3 is an abbre viation of Motion Picture Exper ts Group (or MPEG) Audio La yer 3. MP3 is simply a file format with a data compression ratio of 1:10 (128 Kbps*). WMA (Windows Media ® A udio) is the digital audio compression format de veloped b y Microsoft Corporation.
26 ENGLISH Refer also to “CD OPERA TIONS” on pages 21 to 24. Playing a disc 1 Open the control panel. Note on One-T ouch Operation: When a disc is alr eady in the loading slot, pr essing CD/CD-CH turns on the unit and starts playback automatically .
27 ENGLISH T o stop play and eject the disc Press 0 . Playbac k stops and the control panel moves down. The disc automatically ejects from the loading slot. T o change the display information While pla ying back an MP3/WMA file , you can change the disc information shown on the displa y .
28 ENGLISH File 36 30 20 10 9 8 (Three times) (T wice) T o go to a particular folder directly IMPORT ANT: T o directly select the folders using the n umber button(s), it is required that f olders are assigned 2 digit numbers at the beginning of their f older names.
29 ENGLISH T o skip to the next or previous folder Note: If the folder does not contain any MP3/WMA files, it is skipped. Press 5 (up) while playing a disc to skip to the ne xt folder . Each time you press the b utton consecutively , the ne xt folder is located (and the first file in the folder starts playing, if recorded).
30 ENGLISH T o play back only intros (T rack Intro Scan/Folder Intro Scan) Y ou can pla y bac k the first 15 seconds of each file sequentially . 1 Press MODE to enter the functions mode while pla ying a disc. 2 Press INT (intro), while “ MODE ” is still on the displa y , so that “ TRK INT ” or “ FLDR INT ” appears on the display .
31 ENGLISH SOUND ADJUSTMENTS Adjusting the sound Y ou can adjust the sound characteristics to y our preference . 1 Select the item you want to adjust. Each time you press the button, the adjustab le items change as follo ws: Indication T o do: Range FA D * 1 Adjust the front R06 (Rear only) and rear speaker | balance.
32 ENGLISH Selecting preset sound modes (iEQ: intelligent equalizer) Y ou can select a preset sound mode (iEQ: intelligent equalizer) suitab le to the music genre. • There is a time limit in doing the f ollowing procedure. If the setting is canceled bef ore you finish, star t from step 1 again.
33 ENGLISH Storing your own sound adjustments Y ou can adjust the sound modes to y our preference and store y our own adjustments in memor y (USER 1, USER 2 and USER 3). • There is a time limit in doing the f ollowing procedure. If the setting is canceled bef ore you finish, star t from step 1 again.
34 ENGLISH DEMO MODE Display demonstration CLOCK HOUR Hour adjustment CLOCK MINUTE Minute adjustment CLOCK24H/12H 24/12-hour time displa y A UTO ADJUST Automatic cloc k setting CLOCK DISP Clock displa.
35 ENGLISH FREQ MID FREQ HIGH FREQ MID 37 38 HIGH POWER 38 T AG DISP OFF T AG DISP ON T AG DISP ON LOW PO WER HIGH POWER FREQ LOW LEVEL 1 LEVEL 2 LEVEL 1 3 6 DIMMER AU TO 36 EQ & LEVEL SILENT DIMM.
36 ENGLISH T o select the level meter—LEVELMETER Y ou can select the le v el meter display according to your pref erence. When shipped from the f actory , this mode is set to “LEVEL 1. ” • LEVEL 1/LEVEL 2: Display the audio le v el meter with diff erent illumination pattern.
37 ENGLISH T o select the telephone muting — TELEPHONE This mode is used when a cellular phone system is connected. Depending on the phone system used, select either “MUTING 1” or “MUTING 2, ” whichev er mutes the sounds from this unit. When shipped from the factory , this mode is deactivated.
38 ENGLISH T o select the amplifier gain control — AMP .GAIN Y ou can change the maximum v olume level of this unit. When the maxim um power of the speakers is less than 50 W , select “LO W PO WER” to pre vent them from being damaged. When shipped from the f actor y , “HIGH PO WER” is selected.
39 ENGLISH Assigning names to CDs Y ou can assign names to CDs (both in this unit and in the CD changer). After assigning a name, it will appears on the displa y when you select the source. Source Maximum number of c haracters CDs* Up to 32 characters (up to 40 discs) * Y ou cannot assign a name to a CD T ext or an MP3/WMA disc.
40 ENGLISH Changing the control panel angle Y ou can change the angle of the control panel in four positions . 1 Press and hold (angle) until the angle adjustment screen appears. 2 Press (angle) repeatedly to adjust the angle to the position y ou want.
41 ENGLISH Attaching the control panel 1 Insert the left side of the control panel into the groo ve on the panel holder . 2 Press the right side of the control panel to fix it to the panel holder . Note on cleaning the connectors: If you fr equently detach the contr ol panel, the connectors will deteriorate .
42 ENGLISH CD CHANGER OPERA TIONS Playing discs Select the CD changer (CD-CH). * If you have changed “EXTERN AL IN” setting to “LINE IN” (see page 38), you cannot select the CD changer . • When the current disc is an MP3 disc: Playbac k star ts from the first folder of the current disc once file check is completed.
43 ENGLISH T o go to a particular disc directly Press the number b utton corresponding to the disc number to start its playback (while the CD changer is playing). • T o select a disc number from 1 – 6: Press 1 (7) – 6 (12) briefly . • T o select a disc number from 7 – 12: Press and hold 1 (7) – 6 (12) f or more than one second.
44 ENGLISH (Three times) (T wice) (Three times) (T wice) T o skip to the next or previous folder (only for MP3 discs) T o show the disc information for CD T ext and MP3 discs This is possible only when connecting a JVC CD changer equipped with CD T e xt and/or MP3 disc information reading capability .
45 ENGLISH Selecting the playback modes T o play back tracks/files at random (Folder Random/Disc Random/Magazine Random Play) 1 Press MODE to enter the functions mode while pla ying a disc. 2 Press RND (random), while “ MODE ” is still on the displa y .
46 ENGLISH Mode Active Plays repeatedl y indicator TRK RPT RPT indicator The current (or lights up. specified) track/file. FLDR RPT* and RPT All files of the indicators current (or specified) light up . folder of the current disc. DISC RPT and RPT All tr acks/files of the indicators current (or specified) light up .
47 ENGLISH EXTERNAL COMPONENT OPERA TIONS Playing an external component Y ou can connect the e xternal component to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied).
48 ENGLISH DAB TUNER OPERA TIONS T uning in to an ensemble and one of the services A typical ensemble has 6 or more prog rammes (services) broadcast at the same time. After tuning in to an ensemble , you can select a service you want to listen to . Before y ou star t.
49 ENGLISH 3 Start searching f or an ensemble. When an ensemble is receiv ed, searching stops. T o stop searc hing before an ensemb le is received, press the same button y ou have pressed f or searching. 4 Select a service (either primary or secondary) you want to listen to.
50 ENGLISH 3 T une in to an ensemble you want. 4 Select a service of the ensemble y ou want to listen to. 5 Press and hold the number b utton (in this example, 1) for more than 2 seconds to store the selected service into the preset number y ou want. 6 Repeat the abo ve procedure to store other D AB services into other preset number s.
51 ENGLISH What you can do more with DAB T racing the same programme automatically (Alternative Reception) Y ou can k eep listening to the same programme .
52 ENGLISH Sound modes (preset frequency level settings) The list below shows the preset frequency le vel settings f or each sound mode. Sound modes Preset equalizing values LOW LOW LOW MID MID HI HI .
53 ENGLISH TROUBLESHOOTING What appears to be trouble is not alw a ys serious. Check the follo wing points bef ore calling a service center . Remedies Adjust it to the optimum le vel. Check the cords and connections. Press the reset button on the control panel.
54 ENGLISH Remedies Change the disc. Add the extension code <.mp3> or <.wma> to their file names. Change the disc. (Record MP3/WMA files using a compliant application.) Skip to another file or change the disc. (Do not add the extension code <.
55 ENGLISH Remedies Inser t discs into the magazine. Inser t discs correctly . Inser t the magazine. Connect this unit and the CD changer correctly and press the reset button of the CD changer . Press the reset button of the CD changer . Press the reset button on the control panel.
56 ENGLISH MAINTENANCE Center holder Handling discs This unit has been designed to reproduce CDs, CD-Rs (Recordable), CD-R Ws (Re writable), and CD T exts .
57 ENGLISH SPECIFICA TIONS AUDIO AMPLIFIER SECTION Maximum P ower Output: F ront: 50 W per channel Rear: 50 W per channel Continuous P ower Output (RMS): F ront: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distor tion.
EN, R U 0104KKSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Затр у днения при эк сплу атации? По жалуйста, .
5 ! Ÿ ~ @ ⁄ ¤ 53 mm 184 mm 4 3 2 1 KD-G807 Installation/Connection Manual Рук ово дство по установке/по дключению 0104KKSMDTJEIN EN, R U GET0200-002A [EE] Parts list for installation and connection The follo wing par ts are provided for this unit.
3 1 2 4 When installing the unit without using the sleeve / При у становке устройства без испо льзования муфты In a T oy ota for e xample, first remo v e the car radio and install the unit in its place.
1 * 1 * 1 (ILLUMINATION) 1 2 3 5 7 6 4 3 2 15 B1 B3 B5 B7 B2 B4 B6 B8 A5 A7 A2 A4 A8 A6 B1 B3 B5 B7 B2 B4 B6 B8 A5 A7 A2 A4 A8 A6 A8 A7 A5 A4 A2 B5 B6 B4 B3 B8 B7 B2 B1 A6 3 * 2 Bef ore checking the operation of this unit prior to installation, this lead must be connected, otherwise power cannot be turned on.
L R L R L R L R L L R R L L R L R INPUT R L R LINE REAR FRONT OUT L R L R L INPUT * 3 * 3 R 4 Y ou can connect an amplifier (and other equipment) to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
An important point after buying a device JVC GET0200-001A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC GET0200-001A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC GET0200-001A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC GET0200-001A you will learn all the available features of the product, as well as information on its operation. The information that you get JVC GET0200-001A will certainly help you make a decision on the purchase.
If you already are a holder of JVC GET0200-001A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC GET0200-001A.
However, one of the most important roles played by the user manual is to help in solving problems with JVC GET0200-001A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC GET0200-001A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
