Instruction/ maintenance manual of the product GET0137-001A JVC
Go to page of 34
GET0137-001A [EE] INSTR UCTIONS ИНСТР УКЦИИ ПО ЭК СПЛУ А Т АЦИИ KD-S847 CD RECEIVER РЕСИВЕР С ПРОИГРЫВ А ТЕЛЕМ К ОМПАКТ -ДИСК ОВ ENGLISH Р УCCKИЙ For installation and connections, refer to the separate manual.
2 ENGLISH BEFORE USE * For safety .... • Do not raise the volume le vel too much, as this will block outside sounds, making driving danger ous. • Stop the car befor e performing any complicated operations.
3 ENGLISH CONTENTS Thank you f or purchasing a JVC product. Please read all instructions carefully bef ore operation, to ensure your complete understanding and to obtain the best possib le performance from the unit. How to reset your unit ............
4 ENGLISH LOCA TION OF THE BUTTONS Control panel u E (EQ: equalizer) b utton i CD button o (control panel release) button Display window ; LOUD (loudness) indicator a EQ (equalizer) indicator s CD–i.
5 ENGLISH BASIC OPERA TIONS 4 Adjust the sound as y ou want. (See pages 21 and 22.) T o drop the volume in a moment Press briefly while listening to any source. “A TT” star ts flashing on the display , and the volume le vel will drop in a moment. T o resume the previous v olume lev el, press the button briefly again.
6 ENGLISH Setting the clock 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the displa y . (PSM: see page 23.) 2 Set the hour . 1 Select “ CLOCK H ” (hour) if not sho wn on the display . 2 Adjust the hour .
7 ENGLISH RADIO OPERA TIONS Listening to the radio Y ou can use either automatic searching or manual searching to tune in to a par ticular station. Searching a station automatically: Auto search 1 Select the band (FM 1 – 3, AM). Each time you press the button, the band changes as follo ws: Note: This r eceiver has three FM bands (FM1, FM2, FM3).
8 ENGLISH 3 T une in to a station y ou want while “ M ” (manual) is flashing. • If you release your finger from the b utton, the manual mode will automatically turns off after 5 seconds. • If you hold down the b utton, the frequency keeps changing—in 50 kHz intervals (87.
9 ENGLISH Manual preset Y ou can preset up to 6 stations in each band (FM1, FM2, FM3, and AM) manually . Ex.: Stor ing FM station of 88.3 MHz into the preset number 1 of the FM1 band. 1 Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).
10 ENGLISH Refer to “MP3 OPERA TIONS” on pages 16 to 20 for oper ating MP3 discs. Playing a CD Insert a CD into the loading slot. The unit turns on, draws the CD and star ts playbac k automatically . Note on One-T ouch Operation: When a CD is alr eady in the loading slot, pressing CD turns on the unit and starts playback automatically .
11 ENGLISH Locating a track or a particular portion on a CD T o fast-forward or reverse the track T o go to the next or previous tracks T o go to a particular track directly Press the number button corresponding to the track n umber to star t its playback.
12 ENGLISH Selecting CD playback modes T o play back tracks at random (Disc Random Play) Y ou can pla y back all trac ks on the CD at random. 1 Press M (MODE) to enter the functions mode while pla ying a CD . 2 Press RND (random), while still in the functions mode, so that “ DISC RND ” appears on the display .
13 ENGLISH Prohibiting disc ejection Y ou can prohibit disc ejection and can lock a disc in the loading slot. While pressing CD , press and hold 0 for more than 2 seconds. “ EJECT ” flashes on the display f or about 5 seconds, and the disc is loc ked and cannot be ejected.
14 ENGLISH MP3 INTRODUCTION Precautions when recording MP3 files on a CD-R or CD-RW This unit can only read MP3 files that are recorded in the f or mat that is compliant with ISO 9660 Le vel 1, Le vel 2, or Joliet. How are MP3 files recorded and played back? MP3 “ files (tracks) ” can be recorded in “ folder s ”— in PC terminology .
15 ENGLISH MP3 folder/ file configuration : Root : Folders : MP3 files MP3 playback/search order • The numbers in circles below the MP3 files ( ) indicate the playback order and search order of the MP3 files. Nor mally this unit plays bac k MP3 files in the recorded order .
16 ENGLISH Refer also to “ CD OPERA TIONS ” on pages 10 to 13. Playing an MP3 disc Insert an MP3 disc into the loading slot. The unit turns on, draws the MP3 disc and star ts playbac k automatically . Note on One-T ouch Operation: When a disc is alr eady in the loading slot, pressing CD turns on the unit and starts playback automatically .
17 ENGLISH T o change the display information While pla ying back an MP3 file, you can change the MP3 disc inf or mation shown on the display . Each time you press DISP (display), the displa y changes.
18 ENGLISH T o go to a particular file quickly within the current folder (+10 and –10 buttons) 1 Press M (MODE) to enter the functions mode while playing an MP3 disc. 2 Press +10 or – 10. * The first time you press +10 or – 10 button, the file skips to the nearest higher or low er file with a file number of multiple ten (e x.
19 ENGLISH T o select a par ticular file in a folder , press ¢ or 4 after selecting the folder . T o skip to the next or previous folder Note: If the folder does not contain any MP3 files, it is skipped. Press 5 (up) while playing an MP3 disc to skip to the next folder .
20 ENGLISH Selecting MP3 playback modes T o play back files at random (Folder Random/Disc Random Play) Y ou can play bac k all files of the current f older or all files on the MP3 disc at random. 1 Press M (MODE) to enter the functions mode while playing an MP3 disc.
21 ENGLISH SOUND ADJUSTMENTS Indication For: Preset values BAS TRE LOUD USER (Flat sound) 00 00 OFF ROCK Roc k or +03 +01 ON disco music CLASSIC Classical +01 –02 OFF music POPS Light music +04 +01 OFF HIP HOP Funk or rap +02 00 ON music JAZZ Jazz music +02 +03 OFF Ex.
22 ENGLISH Adjusting the sound Y ou can adjust the sound characteristics to your preference . 1 Select the item you want to adjust. Each time you press the button, the adjustab le items change as follo ws: Indication T o do: Range BAS* 1 Adjust the bass.
23 ENGLISH OTHER MAIN FUNCTIONS Changing the general settings (PSM) Y ou can change the items listed in the table below b y using the PSM (Preferred Setting Mode) control. Basic Procedure 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the displa y .
24 ENGLISH T o select the level meter—LEVEL Y ou can select the le vel displa y according to your preference . When shipped from the factory , “A UDIO 2” is selected. • A UDIO 1: Shows the audio le vel indicator . • A UDIO 2: Alter nates “A UDIO 1” setting and illumination display .
25 ENGLISH Detaching the control panel Y ou can detach the control panel when leaving the car . When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder . Detaching the control panel Before detaching the control panel, be sure to turn off the power .
26 ENGLISH TROUBLESHOOTING What appears to be trouble is not alw ays serious. Check the f ollowing points before calling a service center . Remedies Adjust it to the optimum le vel. Check the cords and connections. While holding SEL (select), press (standby/on/ attenuator) f or more than 2 seconds to reset the unit.
27 ENGLISH Remedies Change the disc. Add the extension code — mp3 to their file names. Change the disc. (Record MP3 files using a compliant application.) Skip to another file or change the disc. (Do not add the extension code — mp3 to non- MP3 files.
28 ENGLISH MAINTENANCE Handling discs This unit has been designed to reproduce CDs, CD-Rs (Recordable), CD-R Ws (Rewritable), and CD T exts. • This unit is also compatible with MP3 discs. How to handle discs When removing a disc from its case, press down the center holder of the case and lift the disc out, holding it by the edges.
29 ENGLISH AUDIO AMPLIFIER SECTION Maximum P ower Output: F ront: 50 W per channel Rear: 50 W per channel Continuous P ow er Output (RMS): F ront: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distor tion. Rear: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.
EN, R U 0203KKSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Затр у днения при эксплу атации? По жалуйста, .
1 53 mm 184 mm KD-S847 Installation/Connection Manual Рук ово дство по установке/по дключению ENGLISH • This unit is designed to operate on 12 V DC, NEGA TIVE ground electrical systems. INST ALLA TION (IN-DASH MOUNTING) • The follo wing illustration shows a typical installation.
2 • When installing the unit without using the sleeve • При установке у стройства без испо льзования муфты In a T oy ota for e xample, first remov e the car radio and install the unit in its place.
3 6 1 2 3 4 2 P L O M 4 * * 3 15 F E D C H G B A 5 J View from the lead side Вид со стороны к онт актов F rom the car body На к орпусе автомобиля Original wirin.
4 L R L R R L *2 INPUT R L EF B D H G A C ** R L R * 2 L INPUT R L LINE REAR FRONT OUT R L ** TROUBLESHOOTING • The fuse blo ws. * Are the red and black leads connected correctly? • P ower cannot be turned on. * Is the yellow lead connected? • No sound from the speaker s.
An important point after buying a device JVC GET0137-001A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC GET0137-001A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC GET0137-001A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC GET0137-001A you will learn all the available features of the product, as well as information on its operation. The information that you get JVC GET0137-001A will certainly help you make a decision on the purchase.
If you already are a holder of JVC GET0137-001A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC GET0137-001A.
However, one of the most important roles played by the user manual is to help in solving problems with JVC GET0137-001A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC GET0137-001A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
