Instruction/ maintenance manual of the product HD-15 Amx
Go to page of 2
Quick Start Guide AutoPatch RGBHV (HD-15) DAD Module Overview The RGBHV (HD-15) DAD (Distrib ution Amplifier Driver) Module has one HD-15 input connector and four HD-15 output connect ors for 1:4 distribution of RGBHV analo g signals. The single RGBHV input is distribut ed to four outputs ove r standard cable runs of up to 100 ft .
For full warranty informatio n, refer to www.amx.com 01/08 ©2008 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specif ications without n otice at any time. 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.
An important point after buying a device Amx HD-15 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Amx HD-15 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Amx HD-15 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Amx HD-15 you will learn all the available features of the product, as well as information on its operation. The information that you get Amx HD-15 will certainly help you make a decision on the purchase.
If you already are a holder of Amx HD-15, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Amx HD-15.
However, one of the most important roles played by the user manual is to help in solving problems with Amx HD-15. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Amx HD-15 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center