Instruction/ maintenance manual of the product DAS-AMP4 AMX
Go to page of 12
Operation/Reference Guide Distributed Audio Carbon XA Amplifiers DAS-AMP4 4-Channel Amplifier DAS-AMP8 8-Channel Amplifier DAS-(I)AMP4 4-Channel Amplifier DAS-(I)AMP8 8-Channel Amplifier Initial Relea.
AMX Limited Warranty and Disclaimer This Limited W arranty and Disclaimer extends only to products purchased directly from AMX or an AMX Authorized Partn er which include AMX Dealers, Distributors, VIP’s or other AMX authorized entity .
Table of Contents i Carbon XA Amplifiers Table of Contents IMPORTANT SAFETY INSTRUCTIONS ................... ............................................. a Carbon XA Amplifiers .................... ....................................................
ii Carbon XA Amplifiers Table of Contents.
IMPORTANT SAFETY INSTRUCTIONS a Carbon XA Amplifiers IMPORTANT SAFETY INSTRUCTIONS 1. Read instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth.
IMPORTANT SAFETY INSTRUCTIONS b Carbon XA Amplifiers.
Carbon XA Amplifiers 1 Carbon XA Amplifiers Carbon XA Amplifiers Overview Where more than one pair of speakers is required in a zone, Carbon XA amplifiers provide the e xtra power needed to dri ve up to 4 additional speaker pairs (FIG. 1). Use Carbon XA in back yards, large rooms or other zones where additional speakers are needed.
Carbon XA Amplifiers 2 Carbon XA Amplifiers Product Specifications Carbon XA Product Specifications Models Available: • DAS-AMP4 (FG1 102-01) 4-Channel Amplifie r (120 V) • DAS-IAMP4 (FG1 102-02) .
Wiring and Connections 3 Carbon XA Amplifiers Wiring and Connections Connecting Carbon XA to a Mi-Series Audio Controller Connect the Carbon XA Amplifier to the Mi-Series Audio Controller via the Euro-style connector labelled “ From Contr oller ” on the rear panel of the Carbon XA.
Wiring and Connections 4 Carbon XA Amplifiers Wiring Diagram The illustration below (FIG. 2) provides a wiring di agram illustrating connections from the Mi-Series Audio Controller , and to a Matrix K eypad: FIG.
Wiring and Connections 5 C arbon XA Amplifiers.
6/08 © 2008 AMX. Al l rights reserved. AMX and the AMX log o are register ed trademarks of AMX. AMX reserv es the right to alter specifica tions without notice at a ny time. It’s Your World - Take Con trol™ 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 USA • 800.
An important point after buying a device AMX DAS-AMP4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AMX DAS-AMP4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AMX DAS-AMP4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AMX DAS-AMP4 you will learn all the available features of the product, as well as information on its operation. The information that you get AMX DAS-AMP4 will certainly help you make a decision on the purchase.
If you already are a holder of AMX DAS-AMP4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AMX DAS-AMP4.
However, one of the most important roles played by the user manual is to help in solving problems with AMX DAS-AMP4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AMX DAS-AMP4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
