Instruction/ maintenance manual of the product Z5 Jura Capresso
Go to page of 37
IMPRESSA Z5 Instructions for use 9/05 Art. Nr. 65475.
= Note = Important = Tip JURA Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www.jura.com.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 7 c b a 1 Fig. 14 Fig. 13: Correct assembly of the cappuccino nozzle Make sure there is always a small gap between the rear cappuccino nozzle and the connection piece.
1 2a 3 7 6 5 4b 4a 8 9 15 14 13 12 11 10 AC B D EG FJ KM L H I 16 a 16 b 2b.
Description of the machine 1. Drip tray 2. a) Drip grate b) Cup platform 3. Coffee grounds tray and container 4. a) One Touch Cappuccino nozzle* long spout b) One Touch Cappuccino nozzle* short spout 5. Water tank with handle and level indicator 6. Water tank cover 7.
6 Contents 1. Safety information .............................................. page 7 1.1 Warning .................................................. page 7 1.2 Precautions .............................................. page 7 2. Preparing the IMPRESSA Z5 .
7 Introduction Thank you for purchasing the IMPRESSA Z5. To ensure perfect functioning of your IMPRESSA, carefully read this operating manual and keep it for future reference.
8 2.2 Check electrical fuse The IMPRESSA Z5 is designed for an electric current of 10 amperes. Check if the electrical fuse has sufficient capacity. 2.3 Fill water tank Only use fresh, cold water. Never fill in milk, mineral water or other liquids. Remove the water tank and rinse it with cold tap water thoroughly (Fig.
9 2.6.2 Stainless steel vacuum milk container (16b) Always clean the stainless steel vacuum milk container after you have used it. Rinse it with warm water, and with some detergent if necessery Re.
10 CONFIRMED √ PRESS MAINTENANCE Maintenance key (C) lights up. Place a cup each under the height-adjustable coffee spout (12) and the cappuccino nozzle (4) and press the maintenance key (C). SYSTEM FILLS The system now fills up automatically.
11 COFFEE READY Press the Rotary Switch (B) until you hear an acoustic signal. FILTER NO Turn the Rotary Switch (B) until the following message is dis- played: HARDNESS 16°dH Now press the Rotary Switch (B) to start programming.
12 INSERT FILTER PRESS BUTTON Remove the water tank from the IMPRESSA. Empty out any remaining water. Fold up the cartridge holder (Fig.6). Attach the extension piece to the top of the CLARIS plus filter cartridge. Now insert the filter cartridge in the water tank, applying gentle pressure (Fig.
13 6. Rinsing the machine If the coffee machine is switched off and has cooled down, you will be prompted to start a rinsing cycle when switching the machine back on. The machine automatically performs a rinsing cycle when you switch it off. PRESS MAINTENANCE Place a cup under the height-adjustable coffee spout (11).
14 COFFEE READY To stop the brewing process prematurely, press any of the product keys. You can pre-select the strength of your coffee when the ma- chine is ready to brew ( PLEASE SELECT).
15 CAPPU RINSE Place a sufficiently large receptacle (ca. 0.5 litres) under the cap- puccino nozzle (4). Turn the selector switch (1, Fig. 9) to the steam range (c, Fig. 9). Press the maintenance key (C) to start the cappuccino rinsing cycle.
16 MACHINE IS CLEANING COFFEE READY 9.4 Cleaning the cappuccino nozzle Despite the cappuccino cleaning cycle, you should regularly disassemble the cappuccino nozzle and rinse it under running water. Remove the cappuccino nozzle from the IMPRESSA and take it apart as shown in Fig.
17 You can change the amount of water set while the machine is dispensing hot water. To do so, turn the Rotary Switch (B) until the display indicates the required amount (ML). The amount of water can be selected in increments of 5 ML. The amounts given in ML are approximate values and may vary from the effective quantity.
18 Switch the IMPRESSA off with the ON / OFF switch (A). GOODBYE The coffee spout is rinsing. RINSE LEFT SPOUT PRESS BUTTON Press the maintenance key (C) to continue rinsing. GOODBYE When switching the machine off, there may be a hissing sound.
19 When the machine has dispensed as much milk as you wanted, briefly press the key once more. CONFIRMED √ The amount of milk to be dispensed is now programmed. ENOUGH ? PRESS BUTTON When you have made as much coffee as you wanted, briefly press the key once more.
20 15. Programming The IMPRESSA leaves the factory with a number of default settings that allow you to make coffee without having to pro- gram the machine first.
21 COFFEE READY Press the Rotary Switch (B) until you hear an acoustic signal. FILTER NO or YES Turn the Rotary Switch (B) until the following message is dis- played: TEMPERATURE Press the Rotary Switch (B) to start programming.
22 √ AROMA Now turn the Rotary Switch (B) until the following message is displayed: EXIT Now press the Rotary Switch (B) to leave the programming mode. COFFEE READY 15.6 Cappuccino programming You can also make the cappuccino settings in the program- ming mode or as described in Chapter 14.
23 Press the Rotary Switch (B) until you hear an acoustic signal. FILTER NO or YES Turn the Rotary Switch (B) until the following message is dis- played: MILK 20 SEC (example) Now press the Rotary Switch (B) to start programming.
24 Now press the Rotary Switch (B) to leave the programming mode. COFFEE READY Save energy: No Selecting this level puts the IMPRESSA in constant stand-by mode. This setting allows you to make coffee or frothed milk without having to wait for the machine to heat up.
25 TIME 13:50 Now turn the Rotary Switch (B) until the following message is displayed: EXIT Now press the Rotary Switch (B) to leave the programming mode. COFFEE READY 15.10 Programming the automatic switch-on time COFFEE READY Press the Rotary Switch (B) until you hear an acoustic signal.
26 OFF AFTER 5 HRS Now press the Rotary Switch (B) to start programming. OFF AFTER 5 HRS Turn the Rotary Switch (B) to set the switch-off time. OFF AFTER 4 HRS (example) Confirm the automatic switch-off time by pressing the Rotary Switch (B).
27 COFFEE READY 15.13 Renaming This function allows you to rename the different products as well as change the welcome and end text. COFFEE READY Press the Rotary Switch (B) until you hear an acoustic signal.
28 15.14 Programming the language COFFEE READY Press the Rotary Switch (B) until you hear an acoustic signal. FILTER NO or YES Turn the Rotary Switch (B) until the following message is dis- played: LANGUAGE ENGLISH Now press the Rotary Switch (B) to start programming.
29 Now turn the Rotary Switch (B) until the following message is displayed: EXIT Now press the Rotary Switch (B) to leave the programming mode. COFFEE READY Changing the time format COFFEE READY Press the Rotary Switch (B) until you hear an acoustic signal.
30 16.2 Emptying the coffee grounds GROUNDS EMPTY If this information is displayed, the machine will no longer make coffee. The machine will still make hot water and frothed milk, however.
31 Insert the drip tray (3). COFFEE READY 16.6 Filling the bean tank COFFEE READY FILL BEANS If this information is displayed, the machine will no longer make coffee. The machine will still make hot water and frothed milk, however.
32 After another 10 products, the display will change. Please run the cleaning cycle immediately (see Chapter 17). CLEAN NOW CLEAN (flashing) 16.11 Information about decalcify Lime scale builds up in the IMPRESSA as a result of normal use. The degree of calcification depends on the hardness of the water you use.
33 TRAY / GROUNDS EMPTY Empty the drip tray (1) and the coffee grounds tray with the con- tainer (3). TRAY MISSING Place the empty, clean drip tray (1) and the coffee grounds tray with the container (3) back into the IMPRESSA. PRESS BUTTON Place a sufficiently large receptacle (ca.
34 Once started, the decalcifying program must not be inter- rupted. Always wait until the decalcifying agent has been used up and the tank is empty. Never fill in additional descaling agent. COFFEE READY DESCALE Press the maintenance key (C).
35 You will hear an acoustic signal. TRAY / GROUNDS EMPTY Empty the drip tray (1) and the coffee grounds tray with the container (3). TRAY MISSING Place the empty, clean drip tray (1) and the coffee grounds tray with the container (3) back into the IMPRESSA.
36 21. Problems Problem Cause Remedy Very loud noise coming from the grinding Foreign body in grinding gear Please refer to Chapter 16.8 gear Frothing spout squirts Milk hose not properly attached Make sure the milk hose is properly attached Too little froth when frothing milk Cappuccino nozzle clogged Clean nozzle (Chapter 9.
37 22. Legal information These operating instructions contain all the information required for using, operating and maintaining the machine properly. Knowledge of and compliance with the specifications contained in these operating instructions is required for using the machine safely as well as for operational safety and safety during maintenance.
An important point after buying a device Jura Capresso Z5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jura Capresso Z5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jura Capresso Z5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jura Capresso Z5 you will learn all the available features of the product, as well as information on its operation. The information that you get Jura Capresso Z5 will certainly help you make a decision on the purchase.
If you already are a holder of Jura Capresso Z5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jura Capresso Z5.
However, one of the most important roles played by the user manual is to help in solving problems with Jura Capresso Z5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jura Capresso Z5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
