Instruction/ maintenance manual of the product X90 Jura Capresso
Go to page of 22
IMPRESSA X90/ X95 Instructions for use 3/03 Art. Nr. 63721 www. redmonkeycoffee .co.uk tel 0870 207 4831 | email mail @redmonkeycoffee.com.
Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown. = Note = Important = Tip Jura Impressa X90/X95 English .....................................................................................................
Fig. 1 Fig. 4 Fig. 2 Fig. 9 Fig. 3 Fig. 7 Fig. 13 A B Fig. 8 1 2 3 Fig. 10 Fig. 11 Fig. 12 Fig. 6 Fig. 5.
7 8 9 17 18 12 13 14 15 16 19 10 11 20 22 21 6 5 4 3 21 23 D C B A E F G H.
Instructions for use 1 Drip tray / residual water container 2 Drip tray cover 3 Cover for programming keys 4 Coffee key for 2 large cups 5 Coffee key for 1 large cup 6 Coffee key for 2 small cups 7 Co.
6 T able of contents 1. Description ........................................................ page 7 2. Safety instructions .............................................. page 7 2.1 Warnings ................................................... page 7 2.
7 Important information for the user Thank you for choosing this Jura product. Please study these instructions carefully before using your new machine and keep them in a safe place for easy reference in the future.
8 If using acidic decalcifying agents be sure to immediately re- move any splashes and drops from delicate surfaces, especially natural stone and wooden surfaces, or take corresponding pre- cautions. 3. Check before use 3.1 Checking mains voltage The machine is set for the correct voltage before leaving our factory.
9 Place a container under the coffee-spout (15) and press rinsing key . UNIT RINSING COFFEE READY 4.2 Cup illumination The cup illumination puts your coffee in a good light, making it a treat for the eyes. When you switch on the machine or press any key, the cup illumi- nation is activated for 3 minutes.
10 7. Use of Claris filter cartridges Under proper implementation of Claris filter cartridges, decalcifying of the machine becomes unnecessary. For further information, please read the brochure “Claris. Tough to calcium deposits, gentle to your coffee machine“.
11 UNIT RINSING COFFEE READY Put 1, respectively 2 cups under the coffee-spout and press the required key. The pre-brew system (I.P.B.A.S. © ) moistens the coffee powder, briefly interrupts the flow and then starts the real brewing process.
12 Place a cup under the steam/frothing nozzle (20) and immerse the frothing aid in the milk to be frothed or the liquid to be heated. Press steam portion draw-off key . STEAM PORTION You can stop the draw-off operation at any time by pressing the steam draw-off key .
13 13. Programming Before leaving our factory, the machine is adjusted to enable you to obtain coffee without any additional programming. In order to adapt the result to your personal taste, various settings can be pro- grammed individually. The programming keys are located behind the front cover (3).
14 By pressing the button, you can select the next phase, or press the button in order to leave the programming. 13.4 Programming steam portion STEAM PORTION Press key . PORTION /....20 SEC. By pressing key or you can programme time in seconds (drawing off time of 3 – 250 sec.
15 ECONOMY MODE OFF means that the stand-by-status for steam is set to 20 minutes and the heating for the cup warming tray is on. After 10 minutes the warning lamp goes out. By pressing the steam key anew, the machine returns to stand-by-status for drawing off steam.
16 13.14 Program key By using key you can set back the following settings (powder quantity, coffee temperature, water quantity, steam portion, tea portion) to their original standard settings. COFFEE READY Press key until you can hear an acoustic signal.
17 14.6 Clean machine CLEAN UNIT After coffee, etc., has been drawn off 220 times or after 180 rinsing programs have been run, the machine must be cleaned. You can continue to draw off coffee and hot water / steam. However we recommend that you clean the machine (as described in chapter 15) within the next few days.
18 Switch on your machine by pressing ON/OFF key Press key until you can hear an acoustic signal. EMPTY TRAY (FILL WATER might show as well) Put a sufficiently large container under the coffee-spout (15) in order to prevent cleaning liquid from running into the drip tray.
19 FILL WATER Place a container under the pivoting nozzle (20). OPEN TAP PRESS CALC UNIT DECALCIFIYING / PLEASE WAIT Place a container under the height-adjustable tea-spout (22).
20 19. Messages Cause Action FILL WATER Water tank is empty Top up with water Water level indicator in tank is jammed Empty tank, rinse out, fill up and replace Tank is calcified, water level indicato.
21 Cause Action CLEAN UNIT You have drawn off coffee 220 times or run Clean as described in chapter 14.6 the rinsing program 180 times Message still displayed, although machine Run cleaning program ag.
22 Problem Cause Action Not enough froth while – Frothing nozzle blocked – Clean frothing nozzle frothing up milk – Clean Auto-Cappuccino – Clean Profi Auto-Cappuccino/Caffè Latte – as described in chapter 11.
An important point after buying a device Jura Capresso X90 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jura Capresso X90 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jura Capresso X90 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jura Capresso X90 you will learn all the available features of the product, as well as information on its operation. The information that you get Jura Capresso X90 will certainly help you make a decision on the purchase.
If you already are a holder of Jura Capresso X90, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jura Capresso X90.
However, one of the most important roles played by the user manual is to help in solving problems with Jura Capresso X90. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jura Capresso X90 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
