Instruction/ maintenance manual of the product S7 Jura Capresso
Go to page of 28
IMPRESSA S9/S7 avantgarde Instructions for use 1/06 Art. Nr. 65855.
Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown. JURA Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 11 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 12 Fig. 9 Fig. 10 Fig. 13 1 2 3 Fig. 14.
1 2 3 17 6 5 4 7 10 9 8 12 11 13 14 16 15 18 19 21 20 22 26 25 24 23 27 Description of the machine 1. Drip tray 2. Drip grate 3. Programming door 4. Rotary Switch 5. Selection key for pre-ground coffee 6. Coffee à la Carte key 7. 1 Coffee key 8. 2 Coffees key 9.
Contents 1. Safety information .............................................. page 6 1.1 Warnings ................................................ page 6 1.2 Precautions .............................................. page 6 2. Before you start using the IMPRESSA S9/S7 avantgarde .
6 Before you begin Congratulations on having bought this IMPRESSA S9/S7 avant- garde! In order to ensure perfect operation of your IMPRESSA, carefully read this operating manual and keep it for future reference.
7 2.3 Filling the water tank Only use fresh, cold water. Never fill the water tank with milk, mineral water or other liquids. Take out the water tank and thoroughly rinse it out with cold tap water (Fig. 1). Then fill it with water and place it back into the coffee machine.
8 Place a receptacle under the 2-stage frothing jet (24) and press one of the Steam keys . The system now fills up automatically. A little water will leak from the frothing jet. SYSTEM FILLING HEATING UP PRESS RINSE Place a cup under the height-adjustable coffee spout (18).
9 Now turn the Rotary Switch (4) until the following message is displayed: EXIT Now press the Rotary Switch (4) to leave the programming mode. SELECT PRODUCT 5. Using a CLARIS plus filter cartridge When using the CLARIS plus filter cartridge correctly, de- calcifying your IMPRESSA will no longer be necessary.
10 Place a sufficiently large receptacle (min. 0.5 litres) under the pivoting steam spout (23) and press one of the Steam keys to start the filter rinsing process.
11 The coffee brewing process stops automatically as soon as the set amount of water has run through. SELECT PRODUCT To stop the brewing process prematurely, press any of the product keys. We recommend always using powder from fresh coffee beans or pre-ground, vacuum-packed coffee.
12 You can also change the amount of water set while the machine is brewing coffee. Open the programming door. Turn the Rotary Switch (4) until the display indicates the required amount (ML). The amount of water can be selected in increments of 5 ML. The amounts given in ML are approximate values and may vary from the effective quantity.
*The Professional-Cappuccino Frother is optional with the IMPRESSA S7 avantgarde. 13 DRAW OFF STEAM When you have frothed the milk to your liking, pres the key again. 11.3 Attaching the Professional-Cappuccino Frother to the IMPRESSA* Remove the 2-stage frothing jet (24).
14 MACHINE RINSING The coffee spout (18) is rinsed. 13. Programming The IMPRESSA leaves the factory with a number of default settings that allow you to make coffee without having to pro- gram the machine first. You can, however, adjust various parameters to make the coffee suit your personal taste.
15 SELECT PRODUCT Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal. FILTER NO or YES Turn the Rotary Switch (4) until the following message is dis- played: POWDER QUANTITY Now press the Rotary Switch (4) to start programming.
16 13.6 Programming the temperature for coffee, espresso and coffee à la carte You can adjust the temperature for each type of coffee sepa- rately. The temperature can be set to 2 different levels (NORMAL, HIGH). SELECT PRODUCT Open the programming door (3).
17 FILTER NO or YES Turn the Rotary Switch (4) until the following message is dis- played: STEAM PORTION Press the Rotary Switch (4) to activate the program item. PORTION 20 SEC (example) Turn the Rotary Switch (4) to modify the steam portion and then confirm your setting by pressing the Rotary Switch (4).
18 Select this setting if you make mostly black coffees and are prepared to wait for approx. 1 minute before being able to draw steam. Economy mode 2 Selecting this level does not put the IMPRESSA in stand-by mode (economy temperature). The machine heats up each time you make coffee or need to draw steam.
19 Now press the Rotary Switch (4) to start programming. UNIT ON —:— Turn the Rotary Switch (4) to set the hours. UNIT ON 07:00 (example) Press the Rotary Switch (4) to confirm the hours and to activate the minutes. UNIT ON 07:00 Turn the Rotary Switch (4) to set the minutes.
20 SPRACHE DEUTSCH Turn the Rotary Switch (4) to set the language. LANGUAGE ENGLISH (example) Confirm your selection by pressing the Rotary Switch (4). LANGUAGE ENGLISH Now turn the Rotary Switch (4) until the following message is displayed: EXIT Now press the Rotary Switch (4) to leave the programming mode.
21 Now press the Rotary Switch (4) to access the Information menu. TOTAL 1000 (example) Turn the Rotary Switch (4) to display how often you made 2 espressos, 1 coffee, 2 coffees, coffee à la carte, powder, water and steam. Finally, the number of cleaning and decalcifying cycles and filter changes are displayed.
22 14.3 Emptying the drip tray EMPTY TRAY If this information is displayed, the machine will no longer dispense coffee or steam, and the tray must be emptied. Carefully take out the drip tray (1) – which contains water – and the integrated coffee grounds bin.
23 After another 30 products the display will change. You should run the cleaning cycle now (see Chapter 15). SELECT PRODUCT / CLEAN NOW 14.9 Prompt to decalcify Lime scale builds up in the IMPRESSA as a result of normal use. The degree of calcification depends on the hardness of the water you use.
24 Once started, the cleaning process must not be interrupted. After each cleaning process, the filler funnel for the pre- ground coffee (17) should be cleaned as well.
25 Once started, the decalcifying program must not be inter- rupted. Always wait until the decalcifying agent has been used up and the tank is empty. Never fill in additional decalcifying agent.
26 MACHINE DE-SCALING You will hear an acoustic signal. CLOSE TAP Turn the Hot Water key (22) to the symbol. MACHINE DE-SCALING You will hear an acoustic signal. EMPTY TRAY / EMPTY GROUNDS Empty out the drip tray (1) and integrated coffee grounds bin.
27 19. Problems Problem Cause Remedy Grinding gear makes a very loud noise Foreign body in the grinding gear Please refer to Chapter 14.6 Too little froth when frothing milk Professional Cappuccino Frother clogged Clean frother (Chapter 11.
28 20. Legal information These operating instructions contain all the information required for operating and maintaining the machine properly. Knowledge of and compliance with the specifications contained in these operating instructions is required for using the machine safely as well as for operational safety and safety during mainte- nance.
An important point after buying a device Jura Capresso S7 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jura Capresso S7 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jura Capresso S7 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jura Capresso S7 you will learn all the available features of the product, as well as information on its operation. The information that you get Jura Capresso S7 will certainly help you make a decision on the purchase.
If you already are a holder of Jura Capresso S7, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jura Capresso S7.
However, one of the most important roles played by the user manual is to help in solving problems with Jura Capresso S7. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jura Capresso S7 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
