Instruction/ maintenance manual of the product IMPRESSA S90 Jura Capresso
Go to page of 22
IMPRESSA S90/S95/S9 IMPRESSA 701/601 Instructions for use 5/04 Art. Nr. 63720.
Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown. = Note = Important = Tip Jura Impressa S90/S95/S9 – 701/601 English ......................................................................................
1 2 3 Fig. 10 A B Fig. 11 Fig. 12 Fig. 13 Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9.
7 8 9 17 18 12 13 14 15 16 19 10 11 20 22 21 6 5 4 3 2 1 23 D C B A E F G H.
Instructions for use 1 Drip tray / residual water container 2 Drip tray cover 3 Cover for programming keys 4 Coffee key for 2 large cups 5 Coffee key for 1 large cup 6 Coffee key for 2 small cups 7 Co.
6 T able of contents Jura Impressa 1. Description ........................................................ page 7 2. Safety instructions .............................................. page 7 2.1 Warnings ...............................................
7 Important information for the user Thank you for choosing this Jura product. Please study these instructions carefully before using your new machine and keep them in a safe place for easy reference in the future.
8 If using acidic decalcifying agents be sure to immediately re- move any splashes and drops from delicate surfaces, especially natural stone and wooden surfaces, or take corresponding pre- cautions. 3. Check before use 3.1 Checking mains voltage The machine is set for the correct voltage before leaving our factory.
9 Place a container under the coffee-spout (15) and press rinsing key . UNIT RINSING COFFEE READY 4.2 Cup illumination The cup illumination puts your coffee in a good light, making it a treat for the eyes. When you switch on the machine or press any key, the cup illumi- nation is activated for 3 minutes.
10 7. Use of Claris filter cartridges Under proper implementation of Claris filter cartridges, decalcifying of the machine becomes unnecessary. For further information, please read the brochure “Claris. Tough to calcium deposits, gentle to your coffee machine“.
11 UNIT RINSING COFFEE READY Put 1, respectively 2 cups under the coffee-spout and press the required key. The pre-brew system (I.P.B.A.S. © ) moistens the coffee powder, briefly interrupts the flow and then starts the real brewing process.
12 Place a cup under the steam/frothing nozzle (20) and immerse the frothing aid in the milk to be frothed or the liquid to be heated. Press steam portion draw-off key . STEAM PORTION You can stop the draw-off operation at any time by pressing the steam draw-off key .
13 For cappuccino turn the selector switch (1) (Fig. 10) to area (2) For hot milk turn the selector switch (1) (Fig. 10) to area (3) Now place the cup with the cappuccino froth or the hot milk under the coffee spout and draw of the product of your choice.
14 13.2 Programming coffee temperature TEMPERATURE COFFEE / SELECT KEY Now press the key that you want to programme. Select the required temperature (high or normal) by activating key or . To store the new coffee temperature in memory briefly press key .
15 Then press key briefly to store the water hardness level in memory. By pressing the button, you can select the next phase, or press the button in order to leave the programming. To determine the water hardness level please read chapter 6. “Adjusting for water hardness“.
16 13.11 Programming automatic switch off time OFF AFTER 5.0 HOURS Press key By briefly pressing key or you can set the hours and then confirm by pressing key (0.5 to 9.0 hours). By pressing the button, you can select the next phase, or press the button in order to leave the programming.
17 14.4 Fill beans FILL BEANS Fill beans as described in chapter 3.3. The message FILL BEANS will only disappear after drawing off a coffee. We recommend cleaning the bean container from time to time with a dry cloth before you refill beans. Switch off the machine for this purpose.
18 14.10 Empty system This procedure is necessary to prevent your machine from frost damage while being transported. Put a container under the pivoting nozzle (20). Press selector key and remove water tank STEAM INTAKE PRESS STEAM / FILL SYSTEM Switch off machine by pressing ON/OFF key .
19 Open cover (3). Press key until you can hear an acoustic signal. EMPTY TRAY AGENT IN TANK Pour 0.6 litres of water into a container and completely dis- solve the contents of a blister pack (2 tablets). Then fill the mixture into the water tank.
20 19. Messages Cause Action FILL WATER Water tank is empty Top up with water Water level indicator in tank is jammed Empty tank, rinse out, fill up and replace Tank is calcified, water level indicato.
21 Cause Action CLEAN UNIT You have drawn off coffee 220 times or run Clean as described in chapter 14.6 the rinsing program 180 times Message still displayed, although machine Run cleaning program ag.
22 Problem Cause Action Not enough froth while – Frothing nozzle blocked – Clean frothing nozzle frothing up milk – Clean the Professional-Cappuccino Frother – Clean the Professional-Cappuccino Frother as – described in chapter 11.
An important point after buying a device Jura Capresso IMPRESSA S90 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jura Capresso IMPRESSA S90 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jura Capresso IMPRESSA S90 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jura Capresso IMPRESSA S90 you will learn all the available features of the product, as well as information on its operation. The information that you get Jura Capresso IMPRESSA S90 will certainly help you make a decision on the purchase.
If you already are a holder of Jura Capresso IMPRESSA S90, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jura Capresso IMPRESSA S90.
However, one of the most important roles played by the user manual is to help in solving problems with Jura Capresso IMPRESSA S90. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jura Capresso IMPRESSA S90 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
