Instruction/ maintenance manual of the product Impressa F7 Jura Capresso
Go to page of 24
Operating Instructions and W arranty Customer Service 1-800-220-5701 Impr essa F7 Fully Automatic Cof fee & Espr esso Center with Clearyl W ater Car e System 64694R1.
IMPOR T ANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. T o protect against fire, electric shock and personal injury , do not immerse cord, plugs or appliance in water or other liquids.
D. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way . If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
READY 1. Height-Adjustable Coffee Spout 2. Operating Buttons (See Fig. 3) 3. Removable W ater T ank 4. Low W ater Flotation Device (See Fig. 7.4) 5. Clearyl W ater Care Cartridge* 6. Lid for W ater T ank 7. Ground Cof fee Funnel 8. Auto-Lid for Ground Cof fee Funnel 9.
Fig. 6 Fig. 7 Fig. 8 Fig. 5 Fig. 9 4 5. Fig. 3 Grind Fineness Selector Fig. 4 a. Coffee b. Steam / W ater a b Steam/W ater Selector READY c. d. e. f. g.
Fig. 13 Fig. 14 Fig. 12 a b c Tip Metal Cylinder Clip-on Connector 6. Dual Frother Plus Fig. 10 Fig. 11 Fig. 12a.
Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 15 Fig. 16 Steaming: up Frothing: down Fig. 22 a. Metal T ube b. . Chrome Sleeve c. Steam Nozzle 7..
T able of Contents 8. Important Safeguards ..........................................................2 Jura-Capresso / Addr ess Information .................................3 Illustrations...............................................................
1. PRODUCT REGISTRA TION Please read the enclosed pr oduct registration form now . Fill it out and mail or fax it to us within two weeks after purchasing your machine or register online thr ough our website: www .capresso.com. Important : This registration is part of your warranty (chapter 24).
matics and the light gaseous flavors that register on the palate. The high pressur e and the short brewing time prevent the extraction of bitter oils and release less caf feine than any other brewing method. Y ou will always make the absolute freshest and most aromatic cup of cof fee.
All Display Messages Are Shown in RED 5. F ACTOR Y SETTINGS Each machine leaves the factory with the following settings: Filter ..................... – (not installed) Hardness Level .... 2 Aroma ................... ROBUST T emperature .......... HIGH Time .
spout up and down a few times to clear the internal flow . Y ou are now ready to make cof fee. 7. ADDING COFFEE BEANS • Open the bean container lid (Fig. 1, 9), fill with beans (Fig. 5). The container holds approx. 220 grams (8 oz.). Close the lid. Frozen Beans : Thaw 3 to 4 hours befor e adding to be an container .
• When using the 2-Cup button the machine will automatically double the selected amount of coffee. Coffee Str ength MILD – NORMAL - STRONG Push the 1-Cup button once, the display shows MILD . Push the 1-Cup button twice, the display shows NORMAL .
• Place a cup underneath the frother (Fig. 13). • T urn the Steam/Water Selector to the water symbol (Fig. 4b). Hot water will push through the fr other . The display shows the amount of hot water . Y ou can change it from 1 to 16 oz. by turning the Dial (Fig.
Steaming and frothing dir ectly in your cappuccino cup: With practice, you can steam and froth dir ectly in your cappuccino cup. First steam and froth the milk, then add your espresso shot. Please note: The less fat content the milk has the more fr oth will be created.
16a. INST ALLING & ACTIVA TING THE CLEAR YL WA TER CARTRIDGE Important: Never install the cartridge before or during "Preparing Machine For The First Time." • Make sure the water tank is empty . • Remove cartridge from its bag and rinse cartridge under water .
the filter and through the frother . Do not interrupt this process. This activates the filter . The machine will stop automatically . 4. CLOSE T AP . T urn the W ater/Steam Dial back to the cup symbol. HEA TING . READY . 17. ADJUSTING THE WA TER HARDNESS W ater is heated inside the machine.
6. Push the P button to get back to READY . FIL TER : See chapter 16a. HARDNESS : See chapter 17. 18a. AROMA 1. Push and hold P button until display shows FIL TER . 2. T urn Dial to AROMA . 3. Push Dial: ROBUST . 4. T urn Dial to select from ST ANDARD or ROBUST .
18e. CUPS MADE 1. Push and hold P button until display shows FIL TER . 2. T urn Dial to CUPS MADE . 3. Push Dial: The display shows the total number of cups brewed. 4. Push the 1-Cup or 2-Cup Buttons to display usage. 5. Open the Funnel Lid for 2 seconds to check how often this feature was used.
ample beans in the bean container , stir the beans so they flow into the grinder (chapter 7). W e recommend cleaning the bean container from time to time with a dry cloth befor e you refill beans (please make sure the machine is turned off when cleaning).
below within the next few days. Please use one white cleaning tablet (enclosed). The machine comes with a pack of 2 tablets. T o re-order cleaning tablets see chapter 22. Important : Once the cleaning program has started do not interrupt the procedur e.
5. The displays still shows SOL VENT IN T ANK / OPEN T AP . T urn the Steam/Water Selector to the water symbol. T he machine will pump the mixture thr ough the frother in intervals. During this procedur e the display shows DECALC.ON . When this cycle is finished the display shows CLOSE T AP .
All supplies are available thr ough: • The enclosed mail order form that came with your machine • Our toll free line at 1-800-220-5701 or • The Internet at www .capresso.com. 23. FROTHXPRESS PLUS SYSTEM WITH MILK CONT AINER If you prepar e many Cappuccinos or Lattes at a time, we recom- mend the fast and precise fr othXpress Plus System.
D. GRINDER MAKES AN EXTREMEL Y LOUD NOISE; NO BEANS ARE GROUND Reason :A stone is blocking the burr grinder . Solution : Call customer service at: 1-800-220-5701. E. THE DRAWER (Fig. 19) DOESN’T PULL OUT OR DISPLA Y SHOWS MALFUNCTION 8 Solution : T urn off and unplug machine.
An important point after buying a device Jura Capresso Impressa F7 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jura Capresso Impressa F7 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jura Capresso Impressa F7 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jura Capresso Impressa F7 you will learn all the available features of the product, as well as information on its operation. The information that you get Jura Capresso Impressa F7 will certainly help you make a decision on the purchase.
If you already are a holder of Jura Capresso Impressa F7, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jura Capresso Impressa F7.
However, one of the most important roles played by the user manual is to help in solving problems with Jura Capresso Impressa F7. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jura Capresso Impressa F7 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
