Instruction/ maintenance manual of the product F90/F9 Jura Capresso
Go to page of 24
IMPRESSA F90/F9 Instructions for use 3/05 Art. Nr. 65382.
JURA IMPRESSA F90/F9 Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown. = Note = Important = Tip JURA Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 11 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 12 Fig. 9 Fig. 10 Fig. 13 Fig. 14 Fig. 15 1 2 3 Fig. 16.
7 8 11 12 13 14/15 16 17 18 4 3 2 1 5 6 9 10 19 20 Control elements A) Display dialog system B) Symbols (navigation in programming mode) C) Large cup D) Coffee E) Espresso F) Start (to start the draw-.
5 Contents JURA IMPRESSA 1. Description of control panel .............................. page 6 2. Safety information .......................................... page 6 2.1 Warning ................................................. page 6 2.2 Precautions .
6 Important information Thank you very much for purchasing this IMPRESSA coffee machine. Before using your new coffee machine for the first time, carefully read this operating manual and keep it for future reference.
7 2.3 Power switch Actuate the power switch (21) on your IMPRESSA before using the machine for the first time. We recommend that you switch off your IMPRESSA with the power switch (21) if you intend not to use the machine for longer periods of time (e.
8 WWW.IMPRESSA-F-LINE.COM HELLO, MACHINE HEATING UP FILL SYSTEM / WATER PORTION Place an empty cup under the hot water jet (15). Press water portion draw-off key SYSTEM FILLING MACHINE HEATING UP PRESS MAINTENANCE MACHINE RINSING PLEASE SELECT Press symbol .
9 Press symbol until the following message is displayed: WATER HARDNESS 3 Press symbol , you will hear an acoustic signal and the hardness degree flashes. Now, press symbols to adjust the required hardness degree. Press symbol to confirm the new settings.
10 FILTER RINSING. The water draw-off operation is stopped automatically. MACHINE HEATING UP PLEASE SELECT 7. Rinsing the coffee machine When the coffee machine was switched off and has cooled down in the meantime, a rinsing operation is started when the machine is switched on again.
11 MACHINE RINSING PLEASE SELECT Place 1 cup under the adjustable coffee spout (16) and press symbol . LARGE CUP NORMAL Press (/ / ) to select the strength of your coffee. LARGE CUP MILD Press symbol . LARGE CUP MILD Your product is being prepared.
12 PLEASE SELECT Press steam portion draw-off key . MACHINE HEATING UP PLEASE SELECT Place a cup under the 2-stage frothing jet (14) and immerse the frothing aid in the milk to be frothed or the liquid to be heated. Press steam draw-off key again.
13 11.2 Drawing off cappuccino and hot milk with Professional-Cappuccino Frother Fill the milk container with milk or immerse the hose in the milk directly.
14 13.1 Programming the filter Refer to Chapter 6.1 «Inserting the filter». 13.2 Programming the water hardness Refer to Chapter 5 «Adjusting the water hardness». 13.3 Programming the aroma INTENSIVE or STANDARD The aroma for the powder quantities ( / / ) was adjusted to Intensive in the factory.
15 SELECT PRODUCT Select the product, the water quantity of which you want to programme ( / / ) COFFEE 90 ML Press symbol , the value flashes. Use symbols to change the value in 5 ml increments. Press symbol to save the water quantity for this product.
16 13.8 Programming the water portion Use the key to switch on the coffee machine. WWW. IMPRESSA-F-LINE.COM HELLO, MACHINE HEATING UP PRESS MAINTENANCE MACHINE RINSING PLEASE SELECT Press programming key until you hear an acoustic signal.
17 Use the symbols to select the hours and confirm by pressing . Use symbols to adjust the minutes and confirm by pressing . The switch-on time is now programmed. Use the symbols to reach the next programming stage or press programming key to quit Programming Mode.
18 Press symbol , you will hear an acoustic signal and DEUTSCH flashes. Press symbols to select the required language. Press symbol to save the new settings. LANGUAGE ENGLISH Use the symbols to reach the next programming stage or press programming key to quit Programming Mode.
19 14.6 Cleaning the coffee machine After 200 draw-off operations or after 160 rinsing operations, the coffee machine must be cleaned. A message appears on the display, telling you to start the cleaning programme. You can still draw off coffee or hot water/steam.
20 EMPTY TRAY. Take out the tray, empty it and reinstall it. PRESS MAINTENANCE Press maintenance key . MACHINE CLEANING TABLET / PRESS MAINTENANCE (Fig. 6). You will hear an acoustic signal. MACHINE CLEANING EMPTY TRAY. You will hear an acoustic signal.
21 PRESS MAINTENANCE / REFILL WATER MACHINE DE-SCALING The water comes out of the hot water jet in intervals. After some intervals the water is discharged directly in the drip tray.
22 19. Messages Cause Remedy REFILL WATER Water tank is empty. Refill water Float defective Rinse or de-scale water tank REFILL BEANS Bean tank is empty. Refill beans Although you have refilled beans, Draw off a cup of coffee. the message still appears.
23 20. Problems Problem Cause Remedy Very loud noise coming Foreign body in grinding gear Drawing off pre-ground coffee is still possible from the grinding gear Have machine checked by JURA Service To.
24 22. Technical Data Voltage: 230V AC Power: 1450 W Fuse: 10 A Safety check: Energy consumption Standby: approx. 3.5 Wh Energy consumption «Ready for draw-off»: approx. 11.5 Wh Pump pressure: static max. 15 bar Water tank: 1.9 litres Bean tank capacity: 200gr.
An important point after buying a device Jura Capresso F90/F9 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jura Capresso F90/F9 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jura Capresso F90/F9 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jura Capresso F90/F9 you will learn all the available features of the product, as well as information on its operation. The information that you get Jura Capresso F90/F9 will certainly help you make a decision on the purchase.
If you already are a holder of Jura Capresso F90/F9, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jura Capresso F90/F9.
However, one of the most important roles played by the user manual is to help in solving problems with Jura Capresso F90/F9. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jura Capresso F90/F9 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
