Instruction/ maintenance manual of the product E30 Jura Capresso
Go to page of 17
IMPRESSA E30 Instructions for use 03/01 Art. Nr. 62515.
Jura Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www.jura.com Kundendienst Telefon 062 389 82 33 The Impressa E30 is identical in construction and engineering with the Impressa E50/E55 mentioned in the operating instructions .
Fig. 1 Fig. 4 Fig. 7 Fig. 2 Fig. 5 Fig. 8 Fig. 3 Fig. 6 Fig. 9 1 2.
Instructions for use Jura Impressa E50/E55 1. Water volume selector switch 2. Selector button for pre-ground coffee powder 3. Coffee button 2 cups 4. Rinsing button 5. Coffee button 1 cup 6. ON/OFF switch 7. Display with warning lamps 8. Water tank with carrying handle 9.
5 Contents Jura Impressa E50/E55 1. Description .................................................... page 6 1.1 Meaning of symbols in the display ................ page 6 2. Safety instructions .......................................... page 6 2.1 Warnings .
6 Important information for the user Thank you for choosing this Jura product. Please study these instructions carefully before using your new machine and keep them in a safe place for easy reference in the future.
7 Never use a faulty machine or one with a damaged power cable. Never immerse the machine in water. 2.2 Safety precautions Never expose the machine to the effects of rain, snow or frost and never operate it with wet hands. Place your espresso/coffee machine on a solid level surface.
8 You have the following possibilities to adjust the grade of grinding the smaller the dots, the finer the grinding the bigger the dots, the coarser the grinding Important: The grinding grade should only be adjusted while the grinder is working. 3.
9 Note: It is only necessary to adjust the water hardness before the machine is used for the first time or when a diffe- rent quality of water is used. If no water hardness level is changed within 30 seconds, the display goes out and the last value programmed remains unchanged.
10 7. Drawing off espresso/normal coffee Switch on the machine by pressing button. The machine is ready as soon as the warning lamp lights up. Place 1 or 2 cups under the coffee-spout and press the appro- priate button. The pre-brew function (P.B.
11 Important: When steam is first drawn off, there is a possibi- lity of spattering. The pivoting nozzle becomes hot. Avoid direct contact with the skin. 8.1 Resetting to stand-by status Place a container under the pivoting nozzle (13). Turn selector switch for hot-water/steam (12) to position .
12 11.8 Regular servicing Regular Jura services ensure your machine’s reliability and longer life. Keep the original packaging to protect the machine when it is transported. 11.9 Empty system Important: This process is necessary to protect the machine from frost damages while being transported.
13 Switch on machine by pressing button. Push button for about 3 seconds. Warning lamps , (if necessary) , light up. Fill water tank. Empty drip tray and grounds container and replace them. War- ning lamps (if necessary) go out. Place a container under the coffee-spout (9).
14 The flashing of warning lamp indicates that the decalcifying program is activated. If warning lamp lights up, empty drip tray (if necessary). Warning lamps , , , flash and warning lamp lights up. Turn selector switch for hot-water/steam (12) back to position .
15 16. Messages Display Cause Action System empty Fill the system (see chapter 4.1) System too hot after drawing off steam Re-set to coffee ready Selector switch in wrong position Re-set to correct position General troubles 1. – Switch off – Disconnect from mains power – Connect machine to mains power – Switch on machine 2.
16 Display Cause Action Cleaning necessary Run cleaning program Decalcifying necessary Run decalcifying program 17. Problems Problem Cause Action Coffee flow is stopped after – Beans container is em.
17 18. Legal information These operating instructions contain all the information necessary for the correct use, operation and maintenance of your espresso/ coffee machine.
An important point after buying a device Jura Capresso E30 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jura Capresso E30 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jura Capresso E30 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jura Capresso E30 you will learn all the available features of the product, as well as information on its operation. The information that you get Jura Capresso E30 will certainly help you make a decision on the purchase.
If you already are a holder of Jura Capresso E30, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jura Capresso E30.
However, one of the most important roles played by the user manual is to help in solving problems with Jura Capresso E30. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jura Capresso E30 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
