Instruction/ maintenance manual of the product JLBICM 01 John Lewis
Go to page of 32
JLBICM 01 Coffee machine Instruction manual.
.
Important Safety Information It is most important tha t this instruc tion book should be retained with the app liance for futu re reference. Shoul d the appliance be sol d or transferr ed to another o.
During use For installation and servicing Keep this instruction manual together with the machine for any future refere nce. If the machine is sold or transferred to another person, make sure that this instru ction manual is given to the new user, so that he/she can become familiar wit h the machineÊs functio ns and with the recommendations given.
3 Contents For the User For the Installer Important safety inform ation 1 Installation 5 Description of the coffee machine 4 • Building-in 5 The control panel 10 • Components for the installing th.
4 Description of the A ppliance 1. Water reservoir 2. Brita filter 3. Coffee Outlet 4. Steam/water nozzle 5. Drip tray 6. Coffee beans container 7. Grinding regulation knob 8.
5 Installation Building-in Installing the machine i nto kitchen furni ture with proper char acteristics will ensure a correct operation of the e quipment.
6 • Unscrew the cable clamp av ailable on the machine. • Fix the power cable onto the machi ne as shown in the figure. • Connect the power cable as shown in the figure.
7 Installing the machine • Lay the U base plate of the machine on the shelf of the cabinet. • Insert the L plates, compensati ng for any space. The wid th of the housing un it the coffee machine depe nds on the thickness of the cabinetÊs sides.
8 • Fix the U base plate inserting 4 self-threading screws into the 4 fro nt holes of the same plate. Then screw the telescopic runners to each side with the remain ing 8 self-threading screw. • Insert the machine into the hous ing by coupling the machine to the runners fixed to the sides of the carcass.
9 Technical specifications Width 594 mm Depth 475 mm Height 378 mm Capacity of water reservoir 2.5 l Net weight 28 kg Gross weight 31 kg Supply voltage 230 V Rated power 2000 W Power absorbed by the h.
10 The control panel 1. Water refill indicator 2. ON-OFF/stand-by indicator 3. Start indicator 4. Hot water selector indicator 5. Steam selector indicator 6. Light selector indicator 7. Espresso coffee indicator 8. Regular coffee indicator 9. Used Coffee 'drawer full' indicator 10.
11 Instructions for the first use Filling up the water reservoir • Squeeze together the unlockin g levers found under the dri p tray • Gently pull the coffee machine forward from the housing by sliding it along the telescopic runners.
12 • Remove the reservoir and fill it with approximate ly 2.5 litres of water as shown. • replace the water reservoir in its own ho using tankig care to fully e ngage the water valve into the docking sta tion. • Ensure the mains ON/O FF switch(at rear) is ON • push the machine back in to the housing until a „CLICK‰ can be heard.
13 Filling up the container with coffee beans • Press the unlocking levers located under th e drip tray and pul l the machine as it is shown in the figure. • pull the coffee machine forward from the housin g along the telescopic runn ers . • Pour approximately 200 g of coffee beans i nto the container on the top as shown i n the figure.
14 • Push the machin e back into the housin g until a „CLICK‰ can be heard. This indicate that the mac hine has been locked in position. Initial start-up • Put the main switc h in position 1 • The led corresponding to the ON-OFF con trol will blink rapi dly for 3 minutes.
15 Adjusting the texture ground coffee CAUTION This machine is calibrated in the factor y for an optimum level of ground coffee. Too „coarse‰ ground coffee will result in a weaker coffee. Too „fine‰ groun d coffee will result in very strong coffee, delivered by „drops‰ and tasting „bitter‰.
16 • Push the machine back into th e housing until a „click‰ can be heard. This indicates that the machine is locked in position. Stand-by mode • Once powered and inserted i nto the cabi net, the machine is in stand- by mode: this will be signaled by the on/off LED blinking.
17 Making coffee • Press the control corresponding to the desired selectio n. • Press the start control within 10 seconds an d the machine will make the coffee selec ted. • The machine will stop automatica lly CAUTION: the desired function will be disabled if the start control is not pressed within 10 seconds.
18 • The steam/water pipe can be moved to the back of the cabinet when no t in use. Hot water Pull forward when required. CAUTION: when HOT! To dispense hot water, place a container u nder the steam/water nozz le; then press the water control. • the desired amount is disp ensed.
19 Steam - Heating liquids • The steam/water pipe can be moved to the back of the cabinet when no t in use. Pull forward when required. CAUTION: Do not touch when HOT! • Press the steam control and the corres ponding indicator blinks for 20 s econds.
20 Programming the amount of coffee beans to be grinded • This espresso machine has already been calibrated in factory to dispense the ideal measure of ground coffee for one cup of espresso. • However this quantity of gro und coffee can be increased or reduced, then the select ed measure is stored.
21 • Once you have modified the coffee gr ound quantity, press the start contr ol for 10 seconds and the machine will automatically sa ve the quantity desired and it will return to stand-by mode. CAUTION: the correct grinding time can change if a different kind of coffee is used.
22 Programming the volume of coffee dispensed in the cup • The volume of coffee dispensed can be adjusted as desired as follows: • Press the espresso control. • Keep the start control presse d until the programme starts (approximately 5 seconds); the start control LED flas hes.
23 If you wish to reset the standard values Resetting standard values • This coffee machine is calibrated in th e factory to make the optimum Italian espr esso, the values set for the espr esso coffee distribute 30 cc, the values se t for the regular coffee is 80 cc.
24 Signal and alarms Water refill indicator • This machine has a sensor which detect s when the water reservoir is empty. • the reservoir empty led will il luminate.
25 Cleaning Outer parts • Clean the stainless steel parts of the machine with a soft cloth without using aggressive deterg ents . Never use any abrasive sponges nor steel wool to clean th e parts of steel.
26 Drip tray • Remove the drip tray from the machine as it is shown in the figures above. • Make sure that the drip tray is periodically drain ed to pr event any liquid from seeping out and dirtying/damaging the underlying furnit ure. Drip tray and relevant grill ca n be washed in a dishwasher.
27 • Replace the drawer and close the door. Replace the drip tray. Water reservoir • If the machine is not used for long per iods, change the wa ter in the reservoir and drain the boiler by pressing the coffee button several times. • Clean the water reservoir periodically .
28 Repairs - after sales service If your coffee machine is not performi ng sat isfactorily, consult the fa ult finding guide wit hin this instruction book (somet hi ng not working).
.
John Lewis Partnership 171 Victoria Street London SW I E 5NN www.johnlewis.com.
An important point after buying a device John Lewis JLBICM 01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought John Lewis JLBICM 01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data John Lewis JLBICM 01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, John Lewis JLBICM 01 you will learn all the available features of the product, as well as information on its operation. The information that you get John Lewis JLBICM 01 will certainly help you make a decision on the purchase.
If you already are a holder of John Lewis JLBICM 01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime John Lewis JLBICM 01.
However, one of the most important roles played by the user manual is to help in solving problems with John Lewis JLBICM 01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device John Lewis JLBICM 01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
