Instruction/ maintenance manual of the product PC20235 John Deere
Go to page of 18
STARFIRE Real Time Kinematic (RTK) INSTALLATION INSTRUCTIONS STARFIRE Real Time Kinematic (RTK) PC20235 18DEC03 (ENGLISH) John Deere Ag Management Solutions PC20235 (18DEC03) COPYRIGHT 2003 DE.
.
Installation Instructions OUO6084,0001B83 –19–08SEP03–1/1 Introduction IMPORTANT: Read through this instruction thoroughly and familiarize yourself with process before performing procedure. This instruction covers installation of Real Time Kinematic (RTK) on your STARFIRE system.
Installation Instructions OUO6043,00016FB –19–30MAY03–1/1 Parts List PF90258 Vehicle Bundle • PF11579 Screws, Phillips #8-32, 7/16 in. (2 Used) • PF80608 Radio • PF80611 Harness, STARFIRE .
Installation Instructions OUO6050,0000501 –19–16DEC03–1/11 Radio Installation N64437 –UN–12DEC03 Without TCM N64436 –UN–12DEC03 With TCM A—Screws (Four Used) B—Shroud 1.
Installation Instructions OUO6050,0000501 –19–16DEC03–3/11 N64441 –UN–18DEC03 Radio N64447 –UN–16DEC03 N64449 –UN–16DEC03 A—Radio B—New Bracket C—Screw, Phillips, 7/16 in. (2 Used) 6. Attach radio (A) to new bracket (B) with 7/16 in.
Installation Instructions OUO6050,0000501 –19–16DEC03–4/11 N64448 –UN–16DEC03 A—RTK Harness B—Receiver 7. Connect RTK harness (A) to receiver (B). OUO6050,0000501 –19–16DEC03–5/11 N64450 –UN–16DEC03 A—RTK Harness B—Radio Harness 8.
Installation Instructions OUO6050,0000501 –19–16DEC03–6/11 N64462 –UN–18DEC03 A—TCM Cap B—Radio Harness C—Harness D—Receiver E—Bracket F—Screws (2 Used) IMPORTANT: If base station does not have a TCM, a cap is required on TCM connector on harness or STARFIRE will not function.
Installation Instructions OUO6050,0000501 –19–16DEC03–8/11 N64453 –UN–16DEC03 A—Receiver B—Bracket C—TCM D—Screw (2 Used) E—Radio Harness F—Harness 14. Receivers with TCM: Attach receiver (A), bracket (B), and TCM (C) with screws (D).
Installation Instructions OUO6050,0000501 –19–16DEC03–10/11 N64464 –UN–18DEC03 A—Shroud B—Screws (Four Used) IMPORTANT: System failure can occur if harness is pinched. Ensure harness is routed properly prior to tightening hardware. 20. Attach shroud (A) with previously removed screws (B).
Installation Instructions OUO6050,00004F6 –19–03DEC03–1/2 Vehicle PC7866 –UN–26SEP03 N64444 –UN–12DEC03 1. Attach radio to receiver. (See RADIO INSTALLATION section.) 2. Attach bracket on receiver to bracket on vehicle. 3. Connect STARFIRE harness to GREENSTAR harness.
Installation Instructions OUO6050,00004FA –19–10DEC03–1/3 Absolute (24 Hour Survey) Base Station N64457 –UN–16DEC03 A—Universal Bracket B—Receiver Quick Coupler CAUTION: Mounting location should be fixed firmly so movement of receiver is not possible.
Installation Instructions OUO6050,00004FA –19–10DEC03–2/3 N64444 –UN–12DEC03 CAUTION: Always attach harness to power source before connecting STARFIRE receiver harness. Make sure power inverter has a minimum capacity of 3 amps. A smaller inverter could overheat or cause operational problems.
Installation Instructions OUO6050,00004FB –19–10DEC03–1/4 Quick Survey Base Station N64460 –UN–16DEC03 N64459 –UN–16DEC03 A—Tripod B—Latch CAUTION: If tripod latches are loose, tighten hardware to ensure positive locking of tripod legs.
Installation Instructions OUO6050,00004FB –19–10DEC03–2/4 N64458 –UN–16DEC03 A—Bracket B—Tripod 3. Attach bracket (A) to tripod (B). Continued on next page PC20235 (18DEC03) 13 Installat.
Installation Instructions OUO6050,00004FB –19–10DEC03–3/4 N64466 –UN–18DEC03 N64444 –UN–12DEC03 4. Attach receiver to bracket. 5. Connect STARFIRE harness to power harness. CAUTION: Always attach harness to power source before connecting STARFIRE receiver harness.
Installation Instructions OUO6050,00004FC –19–10DEC03–1/1 Repeater N64465 –UN–18DEC03 SETUP JOHN DEERE RTK Operating Mode RTK Radio Channel (1-14) RTK Network ID (1-4000) Configure Repeater Radio VEHICLE GPS A B C D E F G PAGE 3 1 1 PC7983 –19–04NOV03 1.
Installation Instructions PC20235 (18DEC03) 16 Installation Instructions 121803 PN=18.
An important point after buying a device John Deere PC20235 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought John Deere PC20235 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data John Deere PC20235 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, John Deere PC20235 you will learn all the available features of the product, as well as information on its operation. The information that you get John Deere PC20235 will certainly help you make a decision on the purchase.
If you already are a holder of John Deere PC20235, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime John Deere PC20235.
However, one of the most important roles played by the user manual is to help in solving problems with John Deere PC20235. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device John Deere PC20235 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
