Instruction/ maintenance manual of the product ET-3504-J John Deere
Go to page of 16
1/2-Inch Drill Operator's Manual 1 CAUTION RISK OF INJURY! READ MANUAL BEFORE OPERATING! THIS MANUAL IS AN IMPORTANT PART OF THE DRILL AND SHOULD REMAIN WITH THIS UNIT WHEN YOU SELL OR RENT IT.
2 1/2-Inch Drill Operator's Manual Congratulations on the purchase of your new drill! You can be assured your drill was constructed and designed with quality and performance in mind. Each component has been rigorously tested to ensure the highest level of acceptance.
1/2-Inch Drill Operator's Manual 3 T able of Content SAFETY .................................................................................................................. 4-9 GENERAL SAFETY RULES ..............................................
4 1/2-Inch Drill Operator's Manual W ARNI N G W A R N I NG SI N T HE M A NUA LS . W A RN I NG SI N T HE M A NUA LS . CA U T I ON OC A UT I ON S IN O T H E M A N UA L S OC AUT I ON S IN O T H E M A N UA L S OC AUT I ON S IN O T H E M A N UA L S OC A UT I ON S IN O T H E M A N UA L S RECOGNIZE SAFETY INFORMATION This is the safety alert symbol.
1/2-Inch Drill Operator's Manual 5 KEEP WORK AREA CLEAN AND WELL LIT. Cluttered areas and benches invite injuries. CONSIDER WORK AREA ENVIRONMENT. Don't expose power tools to rain. Don't use power tools in damp or wet locations. Keep work area well lit.
6 1/2-Inch Drill Operator's Manual DON'T OVERREACH Keep proper footing and balance at all times. MAINTAIN TOOLS WITH CARE Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories.
1/2-Inch Drill Operator's Manual 7 OUTDOOR USE EXTENSION CORDS When tool is used outdoors, use only extension cords intended for use outdoors and so marked. STAY ALERT Watch what you are doing. Use common sense. Do not operate tool when you are tired.
8 1/2-Inch Drill Operator's Manual POLARIZED PLUGS To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.
1/2-Inch Drill Operator's Manual 9 EXTENSION CORD Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
10 1/2-Inch Drill Operator's Manual PREPARATION PRIOR TO OPERATION: Before using the Electric Power Tool, complete the following preparations. 1. Extension cord: When the work area is far away from the power source, use an extension cord of sufficient thickness and rated capacity.
1/2-Inch Drill Operator's Manual 11 Operation APPLICATIONS: Drilling in various metal, lumber, and plastics. PRE-OPERATION: CAUTION: CONFIRM THE FOLLOWING POINTS PRIOR TO CONNECTING THE PLUG TO THE POWER RECEPTACLE. 1. Confirm the applied power source: Be sure to operate the Electric Power Tool in the voltage specified on the name plate.
12 1/2-Inch Drill Operator's Manual OPERATION: 1. Pressing force of drill: You can not get holes quickly even if pressing it by strong force more than necessary. It not only damages the tip of the drill bits and decreases the efficiency of operation, but also shortens the life of the drill.
1/2-Inch Drill Operator's Manual 13 Maintenance and Inspection MAINTENANCE AND INSPECTION: CAUTION: BE SURE TO SWITCH POWER OFF AND DISCONNECT THE PLUG DURING MAINTENANCE AND INSPECTION.
14 1/2-Inch Drill Operator's Manual Notes.
1/2-Inch Drill Operator's Manual 15 Notes.
16 1/2-Inch Drill Operator's Manual Manufactured for Deere & Company, Moline, Illinois 61265 1/2" Drill Operator's Manual 111 Code No.
An important point after buying a device John Deere ET-3504-J (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought John Deere ET-3504-J yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data John Deere ET-3504-J - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, John Deere ET-3504-J you will learn all the available features of the product, as well as information on its operation. The information that you get John Deere ET-3504-J will certainly help you make a decision on the purchase.
If you already are a holder of John Deere ET-3504-J, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime John Deere ET-3504-J.
However, one of the most important roles played by the user manual is to help in solving problems with John Deere ET-3504-J. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device John Deere ET-3504-J along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
