Instruction/ maintenance manual of the product ET-3302-J John Deere
Go to page of 20
7-Inch Disc Grinder Operator's Manual 1 CAUTION RISK OF INJURY! READ MANUAL BEFORE OPERATING! THIS MANUAL IS AN IMPORTANT PART OF THE DISC GRINDER AND SHOULD REMAIN WITH THIS UNIT WHEN YOU SELL OR RENT IT.
2 7-Inch Disc Grinder Operator's Manual Congratulations on the purchase of your new disc grinder! You can be assured your grinder was constructed and designed with quality and performance in mind. Each component has been rigorously tested to ensure the highest level of acceptance.
7-Inch Disc Grinder Operator's Manual 3 T able of Content SAFETY .................................................................................................................. 4-10 GENERAL SAFETY RULES ........................................
4 7-Inch Disc Grinder Operator's Manual RECOGNIZE SAFETY INFORMATION This is the safety alert symbol. When you see this symbol on your tool or in this manual, be alert to the potential for personal injury. Follow recommended precautions and safe operating practices.
7-Inch Disc Grinder Operator's Manual 5 NEVER TOUCH MOVING PARTS Never place your hands, fingers or other body parts near the tool’s moving parts. NEVER OPERATE WITHOUT ALL GUARDS IN PLACE Never operate this tool without all guards or safety features in place and in proper working order.
6 7-Inch Disc Grinder Operator's Manual DRESS PROPERLY Do not wear loose clothing or jewelry. They can be caught in moving parts. Rubber gloves and non-skid footwear are recommended when working outdoors. Wear protective hair covering to contain long hair.
7-Inch Disc Grinder Operator's Manual 7 CAUTION STORE TOOL PROPERLY When not in use, the tool should be stored in a dry place. Keep out of reach of children. Lock-out the storage area. KEEP WORK AREA CLEAN Cluttered areas and benches invite injuries.
8 7-Inch Disc Grinder Operator's Manual HANDLE TOOL CORRECTLY Operate the tool according to the instructions provided herein. Do not drop or throw the tool. Never allow the tool to be operated by children, individuals unfamiliar with its operation or unauthorized personnel.
7-Inch Disc Grinder Operator's Manual 9 USE OF EXTENSION CORD Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
10 7-Inch Disc Grinder Operator's Manual IMPORTANT SAFETY INSTRUCTIONS FOR USE OF THE DISC GRINDER WARNING: DEATH OR SERIOUS BODILY INJURY COULD RESULT FROM IMPROPER OR UNSAFE USE OF THE DISC GRINDER. 1. NEVER operate the disc grinder without its wheel guard in place.
7-Inch Disc Grinder Operator's Manual 11 Functional Description MODEL : ET-3302-J 7-INCH DISC GRINDER NOTE: The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance of the power tool.
12 7-Inch Disc Grinder Operator's Manual WARNING: BE SURE TO SWITCH POWER OFF AND DISCONNECT THE PLUG FROM THE RECEPTACLE TO AVOID SERIOUS TROUBLE.
7-Inch Disc Grinder Operator's Manual 13 1. Power source: Ensure that the power source to be utilized conforms to the power source requirements specified on the product nameplate.
14 7-Inch Disc Grinder Operator's Manual OPERATION: 1. Always hold the handle and side handle of the POWER TOOL firmly. Otherwise the counterforce produced may result in inaccurate and even dangerous operation.
7-Inch Disc Grinder Operator's Manual 15 OPERATION (CONTINUED): 3. Grinding angle: Use only its peripheral surface by tilting the grinding wheel at an angle of 15° - 30°, as shown in Fig. 3-a. CAUTION: DO NOT UTILIZE THE ENTIRE SURFACE OF GRINDING WHEEL WHEN GRINDING.
16 7-Inch Disc Grinder Operator's Manual Maintenance and Inspection WARNING: BE SURE TO SWITCH POWER OFF AND DISCONNECT THE PLUG FROM THE RECEPTACLE DURING MAINTENANCE AND INSPECTION. 1. Replacing the grinding wheel: Replace the grinding wheel when it has been worn out to about 2-3/8" (60mm) in external diameter.
7-Inch Disc Grinder Operator's Manual 17 Maintenance and Inspection WARNING: ACCESSORIES FOR THIS POWER TOOL ARE MENTIONED IN THIS INSTRUCTION MANUAL. THE USE OF ANY OTHER ATTACHMENT OR ACCESSORY CAN BE DANGEROUS AND COULD CAUSE INJURY OR MECHANICAL DAMAGE.
18 7-Inch Disc Grinder Operator's Manual Notes.
7-Inch Disc Grinder Operator's Manual 19 Notes.
20 7-Inch Disc Grinder Operator's Manual Manufactured for Deere & Company, Moline, Illinois 61265 7-Inch Disc Grinder Operator's Manual 110 Code No.
An important point after buying a device John Deere ET-3302-J (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought John Deere ET-3302-J yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data John Deere ET-3302-J - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, John Deere ET-3302-J you will learn all the available features of the product, as well as information on its operation. The information that you get John Deere ET-3302-J will certainly help you make a decision on the purchase.
If you already are a holder of John Deere ET-3302-J, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime John Deere ET-3302-J.
However, one of the most important roles played by the user manual is to help in solving problems with John Deere ET-3302-J. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device John Deere ET-3302-J along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
