Instruction/ maintenance manual of the product LST-RLS JobSite Systems
Go to page of 12
INST ALLA TION & USER GUIDE RIGHT , LEFT , SURROUND AND CENTER CHANNEL IN-WALL LOUDSPEAKER LST -RLS/CTR For High Performance Home Theater Reproduction from In-W all Locations DS00388ACN-LST_RLS-CTR.
LST -RLS/CTR RIGHT , LEFT , SURROUND AND CENTER IN-WALL LOUDSPEAKER T ABLE OF CONTENTS Features ............................................................................................................................1 Product Overview ............
Figure 1 New Construction Wings Bracket Frame Speaker Baffle Grille PRODUCT O VERVIEW 1 FEA TURES: LST -RLS ■ Dual 5-1/4” mica filled polypropylene woofers with butyl rubber surrounds ■ 1” liq.
P ACKA GE CONTENTS ■ Speaker x 1 ■ Speaker frame x 1 ■ Speaker grille x 1 ■ Speaker bracket x 1 ■ Wings for new construction x 2 ■ #6 x 1-5/8” Philips head drywall screws x 14 ■ Speake.
3 6. Locate the cutout template. 7. Use a pencil and the cutout template to trace the speaker outline in the desired locations on the wall. 8. Use a drywall saw to cut along the penciled line. 9. Slip the mounting bracket through the opening and pull it toward you so that its front edge slides into the hole and stops in place.
4 Installation New Construction: The speaker brackets should be installed prior to the drywall. 1. Attach the wings to the bracket by snapping them into the sides of the bracket. (See Figure 1). T o shorten the wings, break them along the scored lines.
5 12. The screws should pull the frame and bracket together (sandwiching the drywall) so that the frame is flush with the wall surface. 13. Strip 1/4” of insulation from the end of each wire. 14. T ightly twist the end of each wire until no frayed ends remain.
REMO V AL OF GRILLE Removing the Grille If the grille is already installed, remove it by using a bent paper clip or the tip of a corkscrew and pulling it away from the frame. See Figure 4 . P AINTING THE GRILLE AND FRAME P ainting the Speak er Frame The speakers must be removed prior to painting the frames.
7 SPECIFICA TIONS: LS T -RLS Power handing: 10 – 150 watts Frequency response: 45Hz-21kHz +/- 3dB Impedance: 8 ohms Dimensions: 8-1/4” x 14-1/2” outside dimension 7-1/8” x 13-1/4” hole cutou.
8 LIMITED WARRANTY JobSite Systems (“JOBSITE”), a Niles Audio Corporation company , warrants its passive products (those not requiring AC or battery power) to the original purchaser to be free of manufacturing defects in material and workmanship for a period of ten years from date of purchase.
9 NO TES: DS00388ACN-LST_RLS-CTR.qxp 11/18/04 9:15 PM Page 9.
JOBSITE SYSTEMS 12331 S.W . 130 STREET , MIAMI, FLORIDA 33186 P (866) 4JB-SITE (866-452-7483) – F (305) 238-0185 WWW .JOBSITESYSTEMS.COM JobSite Systems, a Niles Audio Corporation company, 12331 S.W . 130 Street, Miami, Fl 33186. ©2004 Niles Audio Corporation.
An important point after buying a device JobSite Systems LST-RLS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JobSite Systems LST-RLS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JobSite Systems LST-RLS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JobSite Systems LST-RLS you will learn all the available features of the product, as well as information on its operation. The information that you get JobSite Systems LST-RLS will certainly help you make a decision on the purchase.
If you already are a holder of JobSite Systems LST-RLS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JobSite Systems LST-RLS.
However, one of the most important roles played by the user manual is to help in solving problems with JobSite Systems LST-RLS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JobSite Systems LST-RLS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
