Instruction/ maintenance manual of the product SPT-42 Amtrol
Go to page of 4
THIS IS THE SAFETY ALERT SYMBOL. IT IS USED TO ALERT YOU TO POTENTIAL PERSONAL INJURY AND OTHER HAZARDS. OBEY ALL SAFETY MESSAGES THAT FOLLOW THIS SYMBOL TO REDUCE THE RISK OF PERSONAL INJURY AS WELL AS PROPERTY DAMAGE. READ CAREFULLY THE PRODUCT INSTALLATION, OPERATING AND MAINTENANCE MANUAL.
Pre-Installation 1. Visually inspect the Surge-Trol for any damage. If damage exists return product for replacement. 2. Remove air cap. 3. For applications with pump start-up creating water hammer adjust the factory pre-charge setting to 15% below static pressure.
Description Standard Construction Shell Steel Bladder Heavy Duty Butyl NSF/ANSI 61 Bladder Thickness .100 Minimum System Connection Steel - ANSI Flange Coating Red Oxide Primer Factory Precharge 25 PSIG (1.7 bar) Use: SG = Specic gravity of uid: W ater 1 Ethylene glycol 1.
AMTROL INC. LIMITED PRODUCT WARRANTY Products covered: all Products manufactured by AMTROL Inc. (“AMTROL”). This warranty cannot be transferred – it is extended only to the original Purchaser or First User of the Product. By accepting and keeping this Product you agree to all of the warranty terms and limitations of liability described below.
An important point after buying a device Amtrol SPT-42 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Amtrol SPT-42 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Amtrol SPT-42 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Amtrol SPT-42 you will learn all the available features of the product, as well as information on its operation. The information that you get Amtrol SPT-42 will certainly help you make a decision on the purchase.
If you already are a holder of Amtrol SPT-42, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Amtrol SPT-42.
However, one of the most important roles played by the user manual is to help in solving problems with Amtrol SPT-42. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Amtrol SPT-42 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
