Instruction/ maintenance manual of the product JHD3510 Jensen Tools
Go to page of 16
JHD3510 Inst allation and Operation Manual AM/FM/RBDS/WB/CD/AUX-IN/ iPod Ready/SIRIUS Ready Heavy Duty Radio.
JHD3510 ii CONTE NTS System .............. ........... ........... .............. ............ .............. ........... ........... .............. . 1 Safety Information ............... ........... .............. ........... .............. .........
JHD3510 1 SYSTEM Features Features of the Jensen JHD3510 mobile audio system include: • Full Dot Matrix LCD • Selectable Amber/Green Backlighting Color • AM/FM US/EURO Tuner with 30 Presets (12 .
JHD3510 2 SAFETY INFORMATION When Driving Keep the volume level Iow enough to be aware of the road a nd traffic conditions. When Washing your V ehicle Do not expose the product to water or excessiv e moisture. Moisture can cause electrical shorts, fire or other damage.
JHD3510 3 INSTALLATION This unit is designed for installation in vehicl e cabs with an existing 1-DIN radio opening. I n many cases, a special installation kit will be required to mount the radio to the dashboard. See the dealer where the radio was purchased for kit availability .
JHD3510 4 WIRING WHITE RED WHITE RED LINE OUT IPOD IN (WHITE) 8-PIN FEMALE SIRIUS (GRA Y) 8-PIN FEMALE ANTENNA (BLACK) AUX IN (REAR) BLACK BLACK YELLOW YELLOW PA SOCKET 14-PIN CONNECTOR, WIRE INSERTION VIEW VIEW A-A W ARNING! Do not connect the YELLOW +12VDC wire to the battery .
JHD3510 5 BASIC OPERATION Power On/Off Press the rotary encoder POWER button (1) to turn the unit on or off. The unit will resume at the last mode selected (Tuner , Aux, etc.). Volume Control T o increase the volume, turn the ro tary encoder (1) to the right.
JHD3510 6 System Menu 1. Press and hold the AUDIO/MENU button (3) for more than 2 seconds to enter the system menu. The first menu item, “Beep T one”, will appear on the display . 2. Press the AUDIO/MENU button repeatedly to navigate the system menu and select the desired item.
JHD3510 7 T UNER OPER ATION Select a Band Press the BAND button (15) to change between three FM bands and two AM (MW) bands. Press and hold the BAND button to access th e Weatherband (WB). Manual Tuning Press the TUNE/TRK >>| or |<< buttons (19, 18) to seek stations up/down step by step.
JHD3510 8 Weather Band Operation What is the NOAA Weather Radio /Weatheradio Canada? This is a nationwide system that broadcasts local weather emergency information 24 hours a day . The U.S. network has mor e than 530 stations covering the 50 states as well as the adjacent costal waters, Puerto Rico, the U.
JHD3510 9 CD/MP3 PLAYER OPER ATION Inserting and Eje cting a Disc Insert a disc, label-side up, into the disc slot ( 22). The unit will automat ic ally draw the disc in and play the first track on the disc, whether the po wer was turned on or not. Press the eject button (20) to stop disc play and eject the disc.
JHD3510 10 SATELLITE RADIO OPERATION Switching to Sirius Satellite Radio (Requires optional Sirius tuner) Press the MODE button (4) to change th e mode to Sirius radio mode. Accessing your RADIO ID T o display your radio ID, use the TUNE/T RK |<< button to tune to channel “000”.
JHD3510 11 iPod OPER ATION This unit is equipped with an iPod ready function t hat will allow you to control your iPod (if compatible) using the control panel control butt ons. The following iPod versions are supported: • iPod 3G (firmware version 2.
JHD3510 12 CARE AND MAINTENANCE • Keep the product dry . If it does get wet, wip e it dry immediately . Liquids might contain minerals that can corrode the electronic circuits. • Keep the product away from dust and dirt, which can cause premature wear of parts.
JHD3510 13 SPECIFICATIONS CD Signal to Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > 65 dB Channel Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
JHD3510 14 ASA Electronics Corporation www .asaelectronics.com ©2007 ASA Electronics Corporation v .062207.
An important point after buying a device Jensen Tools JHD3510 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jensen Tools JHD3510 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jensen Tools JHD3510 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jensen Tools JHD3510 you will learn all the available features of the product, as well as information on its operation. The information that you get Jensen Tools JHD3510 will certainly help you make a decision on the purchase.
If you already are a holder of Jensen Tools JHD3510, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jensen Tools JHD3510.
However, one of the most important roles played by the user manual is to help in solving problems with Jensen Tools JHD3510. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jensen Tools JHD3510 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
