Instruction/ maintenance manual of the product MCD10 Jensen
Go to page of 17
Thank Y ou! Thank you for choosing a JENSEN product. We’ve tried to make the instructions in this owner ’s manual clear and easy to follow . If you take a few mi nutes to look through it , you’ll learn how to use all of the features of your new JENSEN marine stereo for maximum e njoyment.
2 MCD10 Pr eparation Getting S tarted It’s a good idea to read all of the in structions before beginning the installation. We recommend having your JENSEN 10-Disc CD changer in stalled by a reputable installation shop. T ools and Supplies The following tools and supplies are nee ded to install the CD changer .
3 MCD10 Prepar ation (continued) Trans port Lock Screws The mechanism in the CD changer is "locked" in to place during shipment by transport screws. Be sure to remove the screws prio r to installation. Retain these screws for future use when transporting the unit for service/maintenance.
4 MCD10 7. Asegúrese de utilizar los tornillos provistos. No utilice ningún tornillo que sea parte del sistema de freno o de la dirección para instalar la unidad. 8. Asegúrese de no enganchar ningún cable cuando esté ajustando los tornillos. 9. Esta unidad no se puede instalar de lado, mirando hacia atrás o de arriba hacia abajo.
5 MCD10 Setting the An ti-vibration B oard The unit can be installed horizontally , vertically , at a 45° angle, or susp ended. The position of the built-in anti-vibration springs (left and righ t side) must correspond to the mounting position chosen.
6 MCD10 Installation (continued) Horizontal Installation 1. Make sure the anti-vibration springs are set to position "0". 2. Attach a bracket (A) to each side of the unit using the machine screws (M4x5). 3. Attach the brackets (A) to the mounting base (B) using the hex agonal bolts (M6x12) and M6 flat and split washers.
7 MCD10 Flat Surface a. S tick the su pplied double-sided tape to t he bottom of the mounting bases (B) and peel off the paper backing. b. Drill holes for the self- tapping screws (T5x12). c. Install self-tapping screws to secure the mounting base to the surface.
8 MCD10 Installation (continued) V ertical Installation 1. Make sure the anti-vibration springs are set to position "90". 2. Attach a bracket (A) bracket to each side of the unit using the machine screws (M4x5). 3. Attach the brackets (A) to the mounti ng base (B) using the hexagonal bolts (M6x12) and M6 flat and split washers.
9 MCD10 Flat Surface a. S tick the supplied double-sided tape to the bottom of the mountin g bases (B) and peel off the paper backing. b. Drill holes for the se lf-tapping screws (T5x12). c. Install self-tapping screws to secu re the mounting base to the surface.
10 MCD10 Installa tion (continued) 45° Angle Installation 1. Make sure the anti-vibration springs ar e set to position "45". 2. Attach a bracket (A) to each side of t he unit using the machine scre ws (M4x5). 3. Attach the brackets (A) to the mounting base (B) using the hexagonal bolts (M6x12) and M6 flat and split washers.
11 MCD10 Flat Surface a. S tick the supplied double-sided tape to the bottom of the mounting bases (B) and peel off the paper backing. b. Drill holes for the self-tapping screws (T5x12). c. Install self-tapping screws to secure the mounting base to the surface.
12 MCD10 Installation (continued) Suspended Installation 1. Make sure the anti-vibration springs are set to position "0". 2. Attach a bracket (A) to each side of t he unit using the machine screws (M4x5). 3. Determine the mounting location for the unit.
13 MCD10 Wiring / Cableado / Cablage IMPORT ANT : Incorrect wirin g connections can damage the unit. Fol low the wiring instructions carefully, or have the installation handled b y an experienced technician. IMPORT ANTE: Una con exión incorrecta de los cables p uede dañar la unidad.
14 MCD10 Oper ation Loading the CD Change r Inserting Compact Discs in the Magazine 1. Grip the tab on the magazine tray into wh ich you will be loading a disc and pull it out gently . Pull out only one tray at a time. 2. Insert a disc into the tray with the label side up (play surface facing down).
15 MCD10 Cargando el Cambiador de CD (Continuación) Cargando el Compartimento dentro del Cambiador de CD 1. Presione el botón OPEN para abrir la puerta delantera abajo. 2. Asegurándose que la parte superior del compar timento está hacia arriba, suavemente insértelo dentro de la unidad hasta que escuche un chasquido.
16 MCD10 T roubleshooting Using the Reset Button Press RESET only when one of these conditions occur: • The compact disc changer is first installed • V ehicle power is interru pted (as when replacing the battery) Specifications Frequency Response .
17 MCD10 Dépannage Utilisation du Bo uton de RESET (Réglage) N'appuyez sur le bouton de RESET (Réglage) que dans les conditions suivantes: 1. Le changeur disque compact vient d'être installé. 2. La puissance du véhicule est interrompue (par exemple, lorsque vous remplacez la pi le).
An important point after buying a device Jensen MCD10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jensen MCD10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jensen MCD10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jensen MCD10 you will learn all the available features of the product, as well as information on its operation. The information that you get Jensen MCD10 will certainly help you make a decision on the purchase.
If you already are a holder of Jensen MCD10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jensen MCD10.
However, one of the most important roles played by the user manual is to help in solving problems with Jensen MCD10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jensen MCD10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
