Instruction/ maintenance manual of the product JMD200 Jensen
Go to page of 14
JMD200 Inst allation and Operation Manual AM/FM/CD AUDIO SYSTEM INT PUSH POWER.
JMD200 ii CONTE NTS System Features ............ .............. .............. .............. .............. .............. ........... .... 1 Safety Information ............... .............. .............. .............. .............. .............
JMD200 1 SYSTEM FEATUR ES Features of the Jensen JMD 200 mobile audio system include: • AM/FM Tuner with 30 Preset s (12 AM, 18 FM) • Single In-Dash CD Player •M u t e • Electronic Bass, Trebl.
JMD200 2 SAFETY INFORMATION When Driving Keep the volume level Iow enough to be aware of the road a nd traffic conditions. When Washing your V ehicle Do not expose the product to water or excessiv e moisture. Moisture can cause electrical shorts, fire or other damage.
JMD200 3 INSTALLATION Before You Begin 1. Disconnect Battery Before you begin, always disconnect the battery negative terminal. 2. Remove T r ansport Screws Important Notes • Before final installation, test the wiring co nnections to make sure the unit is connected properly and the system works.
JMD200 4 Wiring Diagram.
JMD200 5 Reconnecting the Battery When wiring is complete, reconnect the battery negative terminal. Removing the Unit T o remove the radio after installation, insert the removal keys straight back until they click, and then pull the radio out. If removal keys are inserted at an angle, they will not lock properly to release the unit.
JMD200 6 BASIC OPERATION Power On/Off Press the rotary encoder POWER button (1) to turn the unit on. Press and hold to turn the unit off. The unit will resume at the last mode selected (Tuner , Aux, etc.). Volume Control T o increase the volume, turn the ro tary encoder (1) to the right.
JMD200 7 Time/Frequency Di sp lay Selector (T/F) Displaying the Clock Press the T / F button (10) to display the time of the incor porated quartz clock for 5 seconds. Setting the Clock 1. T o set the clock, first turn the vehicle ignition and r adio on.
JMD200 8 T UNER OPER ATION Select a Band Press the BND button (3) to change betw een three FM bands and two AM bands. • During FM operation, when the station is broadcasting in stereo, the stereo ico n ( ) appears on the display . • During AM operation, no indications are displayed.
JMD200 9 CD PLAY ER OPERATION Inserting and Eje cting a Disc Insert a disc, label-side up, into the disc slot (7). The unit will automat ically draw the disc in and play the first track on the disc, whether the powe r was turned on or not. Press the eject button (9) to stop disc play and eject the disc.
JMD200 10 CARE AND MAINTENANCE • Keep the product dry . If it does get wet, wip e it dry immediately . Liquids mig ht contain minerals that can corrode the electronic circuits. • Keep the product away from dust and dirt, which can cause premature wear of parts.
JMD200 11 SPECIFICATIONS CD Signal to Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > 55 dB Channel Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ASA Electronics Corporation www .asaelectr onics.com © 2007 ASA Electronics Corporation v .080207.
An important point after buying a device Jensen JMD200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Jensen JMD200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Jensen JMD200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Jensen JMD200 you will learn all the available features of the product, as well as information on its operation. The information that you get Jensen JMD200 will certainly help you make a decision on the purchase.
If you already are a holder of Jensen JMD200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Jensen JMD200.
However, one of the most important roles played by the user manual is to help in solving problems with Jensen JMD200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Jensen JMD200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
